Please note that Miflex high pressure hoses are under a recall notice! Piranha Dive does not sell or have built for them the Miflex hoses!!! Our hoses are fine both low and high pressures. If you have a Miflex hose please contact the place you purchased them from and DO NOT USE them!
| | |
|
Maxtec 02+ Analyzer
Each unit is fully warranty by the manufacturer and they are still sealed in the box!
Oh these also have the barbed adapter with tubing and the Oxyknob adapter included in this price on these units!
The MAXO2+A Scuba analyzer was designed with simplicity and portability in mind
This analyzer is ideal for checking oxygen percent accuracy from your B.C. or directly from a cylinder when used in conjunction with our QuickOx Adapter
Durable, compact design that permits comfortable, hand-held operation and easy to clean
Patented ergonomic design fits comfortably in your hand
We include with our Analyzer the following items below
Features
24 month warranty on both the analyzer and the sensor
Internal MAX-250+ Long Life Sensor "User replaceable"
5,000+ hours operation on 2 AA batteries "Included"
1 OxyKnob
*1 Barbed adapter with clear tubing *( You will need our BC Flow Adapter )
1 Small Screwdriver
Lanyard
Operation manual
Quick reference guide booklet
Easy one touch calibration
You go also go directly to their website for more detailed information
Specification Sheet: http://www.maxtecinc.com/docs/Analyzers/maxo2.specs.pdf
Data Sheet: http://www.maxtecinc.com/docs/Analyzers/maxo2.specs.pdf
Manual: http://www.maxtecinc.com/docs/Analyzers/maxo2.specs.pdf
Scuba Diving Magazine Article: http://www.scubadiving.com/article/news/beneath-sea-2008-and-historical-diving-society-present-legend-sea-sylvia-earle
Specifications
Measurement Range: 0-100%
Resolution: 0.1%
Accuracy and Linearity: 1% of full scale at constant temperature, R.H. and pressure when calibrated at full scale
Total Accuracy: ±3% actual oxygen level over full operating temperature range
Response Time: 90% of final value in approximately 15 seconds at 23°C
Warm-up Time: none
Operating Temperature: 15°C - 40°C (59°F - 104°F)
Storage Temperature: -15°C - 50°C (5°F - 122°F)
Humidity: 0-95% (non-condensing)
Power Requirements: 2 AA Alkaline batteries (2 x 1.5 Volts) INCLUDED see above features!
Battery Life: approximately 5000 hours of continuous use
Low Battery Indication: "BAT" icon displayed on LCD screen
Sensor Type: Maxtec: MAX-250 galvanic fuel cell
Expected Sensor Life: >900,000 O2 percent hours minimum 2+ years in typical applications
Model A Dimensions: 3.0"(W) x 4.0"(H) x 1.5"(D) [76mm x 102mm x 38mm]
|
|
|
|
 "Maxtec 02+ Analyzer")
