Dual Tank Tumbler "Free Domestic Shipping!"

* You are purchasing a dual tank tumbler which will allow you to roll 2 tanks at the same time

* This tumbler will work with cylinders with a length of up to 34 inches and will fit any cylinder with a diameter of 8.25 or smaller 

* This machine consists of two heavy gauge, dichrome-plated steel end plates that support three parallel rubber rollers, the center one of which is rotated by a 60 rpm, 1/4-hp gearmotor.

* This tumbler allows two dive cylinders to be simultaneously tumbled at about 25 rpm.

* The semi-soft rollers will not deface or mark tanks, but still have excellent traction.

* The spacing between each roller axis is adjustable so tanks of different diameters can be accommodated.

* The parallel side rollers are offset in height from the central drive roller which also promotes handling tanks of varying size.

* The tumbler is easily assembled and can be anchored to a bench, floor, or fabricated frame.

* NOTE: An exploded parts diagram/instructions are included or available at our website www.global-mfg.com.

** Electrical connections are not included.

* Supplied with a 110v motor only.

** Shipped in 2 boxes

* Roughly: 47" inches long ...22" Wide by 9" inches tall 

Ships unassembled, in a box that’s around 41" x 11" x 5", and the motor ships alone in a box (12" x 10" x 7").