Your donut wing comes with following:
30lb lift Donut type wing with 4 tank cam band slots in the wing for your tank bands for use without a single tank adapter if you choose or we have dual height grommets so you can fine tune your balance in the water or you can use those holes with a single tank adapter and lastly for tank bands for doubles!
Both the grommet holes and the slots allow you to fine tune your balance by moving your wing height. The grommet holes are 11" inches on center so any single tank adapter will fit your wing if you plan on using one!
The outer shell is made from a tough 1050 Cordura material
Want to get to the inside of your wing? No problem just use our zipper on the inside part on the front side of your wing to easily get inside to do a quick patch if needed or just to keep clean your wing!
K type oral inflator hose and inflator plus a low pressure rubber BC hose,
Need to get to the bladder? No problem we use a high quality zipper to open your outer shell to get to work on your bladder if needed!
Also at the top on the backside is a handle to lift your wing sewn into the donut material!
Specification:
Material:
Inner Shell: 420D TPU Coated Cloth in Black
Outer Shell: 1050D Cordura
Connector: TPU
Colorectal Tube: Rubber
Size Chart:
Donut: When not inflated 64cmx 43cm/////25.2inch x 16.93" inches
When inflating 64cm x 38cmx13.5cm/////25.2inch x 14.96
Low Pressure BC Inflator Hose Length: 55cm/21.50" inches
Rubber corrugated oval inflatorhose Length: 30cm/11.81" inches
Threading Slot: 13cm x 0.7cm/5.12inch x 0.28" inches
Package Includes:
1 Scuba Diving Donut Wing Single Tank 30lbs lift
1 Low Pressure BC Inflator Hose
1 Rubber corrugated oval inflator hose
4 Threading Slots / Plus Dual Grommeted holes!
1 K Type Oral Inflator