|
- Shopping Categories >
- Lift Bags & SMBs >
Surface Marker Buoy's "SMB's"
| | | |
6ft / 72" inch Yellow/Black SMB "Flapper / Duck Valve bottom" 6 Feet Length 6" X 72"210 Denier with a urethane backingApproximately 40+lbs of lifting capacity Small compact design for easy storage with bungee to hold it rolled up or use the valcron strapped that holds it rolled up!Our smb has a oral / Bc hose inflator at the bottom or use a Bc hose to quickly inflate our Smb!!Has a 1" plastic D-ring to attach a slate or light at the top of the SmbWe use a 1" inch stainless steel D-ring at the bottom to clip off quickly We also used reflective tape around the top to aid in spotting you on the surface no matter at which side you are on!We also have a reflective edging to make this smb even more seeable Non-Slip valve at bottom allows air into the smb and stay in without dumping out! "Flapper Valve/ Duckbill Valve" Diver can fill the smb either by your regulator or mouth with the opening at the bottom or quick fill using a Bc hoseLead weights located inside the smb at the bottom allows smb to stand straight up at the surface better than other smb's! Also by having lead weights at the bottom the opening is easier to work with underwaterThis is our Standard size Smb being just under 6" inches overall width and 6 feet long make this the perfect smb for any type of diving When rolled up we use a bungee to hold your Smb closed and a velcro strap!!!We also use a larger over pressure relief button to prevent premature blow outs / failures and to remove air quickly when done using our Smb!Color is half Yellow and Half Black with diver down marking on one side
|
|
|