|
|
- Shopping Categories >
- Cleaning & Repair Products >
Wetsuit & Drysuit Repair Products
| | | | |
Aquaseal FD Urethane Repair Adhesive 3/4oz TubeThis is a must have for divers! Don't miss another dive be prepared with this kit The industry standard for maximum strength repairs to wet suits, dry suits and all watersports products. Flexible urethane formula waterproofs, seals and protects against abrasion. Hundreds of watersports and household uses. For a faster cure time, NOT included in this package. For fastest cure (2 hours or less), mix in Cotol-240 as directed. HOLES AND TEARS: Create backing with removable tape. Fill void and 1/4" beyond edge with Aquaseal. Remove tape after full cure. SEAMS: Apply 1/16" thick bead overlapping seams edges by at least 1/4". Apply with slight pressure to saturate fabric surfaces. HIGH WEAR AREAS: Apply thin coat with knife for flexible abrasion resistance. WARNING: FULLY CURED AQUASEAL IS SLIPPERY WHEN WET. For added traction on footwear, sprinkle sand on uncured Aquaseal 1/2 hour after applying. CLEAN UP: To remove Aquaseal from hands, buff with cloth soaked in paint thinner, nail polish remover or 99% isopropyl alcohol. STORAGE: Advance contents to tube neck. Wipe clean and cap. Keep in cool, dry place; for extended life, place in freezer. To thaw or for easier-flowing contents, soak tube in warm water for 15 minutes.
 California WARNING: Using this product will expose you to toluene, a chemical known to the State of California to cause birth defects or other reproductive harm www.P65Warnings.ca.gov.
For more information visit the Prop 65 Frequently Asked Questions page.
|
|
|
|
 "Aquaseal FD Urethane Repair Adhesive 3/4oz Tube")