You are only purchasing the mount and not the compass or ring!
The SK7 / SK8 compass will still operate even when tilted off level
Factory boot is however, hard to don with their strap, and too tall on your wrist!
The DSS replacement mount is a lower profile, and is designed to accept 1/8 in. to 3/16 in. diameter Bungee Cord. Bungee Cord mounted gauges are far easier to don than Buckled straps, and are depth compensating.
New version will work with both black & white friction rings
The compass snaps into the boot and is securely held in place
Our mount comes FREE with either RED, BLACK, Ocean Blue or OLIVE 1/8 bungee cord (3 feet supplied)
Mount is a low profile design and with bungee cord is self depth compensating
Made from tough elastomeric material that will remain flexible at low temperatures
So we only have a few left and once these are gone they are gone for good so do not miss out!
This boot will fit the Uwatec bottom timer
Bottom Timer snaps into the boot and is securely held in place
Mount is a low profile design and with bungee cord is self depth compensating
Made from tough elastomeric material that will remain flexible at low temperatures
A replacement "boot" or Mount for the Popular Uwatec Digital Bottom Timers & DIGITAL 330m Depth Gauge. These "Hockey Puck" style bottom timers are sold under several names, OMS, ScubaPro and others!
Our mount comes FREE with either RED, BLACK, Ocean Blue or OLIVE 1/8 bungee cord (2.5 feet supplied)
This has a compass with mount that is fitted with bungee cord already on the mount!
The black bungee shock cord allows the mount to adjust to fit your arm during your dive! No more loose fitting mounts or slidding up or down your arm!!
Btw we checked and tested your compass to ensure they are ready for use when they leave us!
Our compass features a rotating 360-degree bezel with click stops and both direct and reciprocal index points!
On our compass we have large easy-to-read numbers that are displayed on the face and in the side window with index marks at 10-degree increments
Our compasses are calibrated for the Northern Hemisphere and this makes our compasses very accurate!
Quickly converts the wrist mounted SK8 to attach to your BCD with this retractor!
Nylon coated cable to prolong the life of the item in salt water and has a 60lbs breaking strength to prevent accidental loss
Self-retracting cable
Two choices of mounting clips that easily attach to your BCD
Extends up to 25 inches
The retractor can either be unclipped or extended whilst attached to your BCD. The stainless steel cable is nylon coated to prolong the life of the item in salt water and has a 60lbs breaking strength to prevent accidental loss.
Fits: Mount Fits: Oceanic Veo: Aeris: Genesis Resource: Hollis DG02: Tulsa Element PLUS More see details!
Please note that if you have the later Veo version which has stand-offs you will need to do the following:
1) Drilled four holes at the bottom of the mount, measured to accommodate the four lugs.
2) Temporarily softened the mount by either:
* putting it in hot water for one minute
*Use a blow dryer moving back and forth over the puck until soft and flexible
3) Carefully inserted the A300 into the mount, aligning the lugs with the drilled holes and pulling the mount over the lugs until it fits into the puck.
This is a replacement boot or Mount for the following popular dive computers
All Oceanic VEO's Computers
Genesis Resource
React Pro
Hollis DG02
Tulsa Element, Tulsa Element 2
Sherwood Profile
Sherwood Insight
Aeris A100, A300, XR1, XR2
Insight computers also!
Our replacement mount securely retains the computer with an easy snap in fit. Low profile and designed to accept 5/32 in. diameter Bungee Cord. Bungee Cord mounted gauges are far easier to don than Buckled straps, and are depth compensating.
The download cable can be used without removing the instrument from the mount.
Simple, secure, snap in installation, tough elastomeric material, remains flexible at low temperatures.
Our mount comes FREE with either RED, BLACK, Ocean Blue or OLIVE 1/8 bungee cord (2.5 feet supplied)
Elastomeric Bungee Ready Mount for *SOME* Pelagic (Oceanic / Aeris / Sherwood) compasses
This mount fits the compasses modules commonly furnished WITH AERIS XR, SHERWOOD 2006 and later years, 2006 Wisdom, Wisdom 2 and OCEANIC VEO models ONLY.
These modules are often referred to as SuperTilt or MaxTilt.
This replacement mount is lower profile, and is designed to accept 1/8 in. to 3/16 in. diameter Bungee Cord. Bungee Cord mounted gauges are far easier to don than Buckled straps, and are depth compensating.
Our mount comes FREE with either RED, BLACK, Ocean Blue or OLIVE 1/8 bungee cord (2.5 feet supplied)
Piranha's Price: $18.00
Bungee Mounts for Computers, Gauges and Compasses
Move a computer or compass off a rigid strap and onto bungee that sits flat over an exposure suit. We stock mounts for Suunto Vyper, Vyper 2, Vytec, Gekko, Air, HelO2 and Zoop, Uwatec bottom timers and 330m depth gauges, ScubaPro Aladin Sport and Matrix, and OMS units, plus SK7 and SK8 compass mounts in black and pink.
