Made out of aluminum making these lightweight but still very strong and durable
The 4 holes are design for 1/4" inch bungee cord "Not Icluded!"
Dimensions: 3" inches overall length / 1" inch Width plus it is 1/8" thick
Rounded and smooth makes sure there is no sharp edges to cut or damage any webbing or bungee!
If your using for sidemount diving you can use these as a rear mounting point for bungee loops or secure your canister light with this great little product
Made out of aluminum making these lightweight but still very strong and durable
The 4 holes are design for 1/4" inch bungee cord "Not Icluded!"
Dimensions: 3" inches overall length / 1" inch Width plus it is 1/8" thick
Rounded and smooth makes sure there is no sharp edges to cut or damage any webbing or bungee!
If your using for sidemount diving you can use these as a rear mounting point for bungee loops or secure your canister light with this great little product
Made out of aluminum making these lightweight but still very strong and durable
The 4 holes are design for 1/4" inch bungee cord "Not Icluded!"
Dimensions: 3" inches overall length / 1" inch Width plus it is 1/8" thick
Rounded and smooth makes sure there is no sharp edges to cut or damage any webbing or bungee!
If your using for sidemount diving you can use these as a rear mounting point for bungee loops or secure your canister light with this great little product
Made out of aluminum making these lightweight but still very strong and durable
The 4 holes are design for 1/4" inch bungee cord "Not Icluded!"
Dimensions: 3" inches overall length / 1" inch Width plus it is 1/8" thick
Rounded and smooth makes sure there is no sharp edges to cut or damage any webbing or bungee!
If your using for sidemount diving you can use these as a rear mounting point for bungee loops or secure your canister light with this great little product
Our sliders are made for us and are made to our specs which allows us to make these a heavy duty style! These will not bend or twist like the thinner ones most retailers sell!
Plastic Slide smooth
Made from high quality stainless material
1 1/2" width for 1 1/2" ide webbing!!
Great for locking items on your harness
These will allow you to adjust your gear a little easier than the tooth version
This is a wider no teeth slider more than a standard one and we have improved this slider with slightly thicker material making it more durable and stable
We also use a higher grade of stainless steel improving it from rusting in salt water use!
This is our heavy duty version which allows you to use thicker webbing or looping two pieces of webbing through will not be an issue with this webbing
Your standard slide has an opening of roughly 1/4 inch and this slide has a 3/8 opening making it a perfect slide for when you need to run two "2" pieces of webbing thru a slot.. No more fighting to get your webbing thru with this slide it now is simple and holds your webbing securely in place
Overall dimensions: 1 1/4 inch wide x 2 5/16 long with a slot opening of 3/8
Rounded edges make sure their is not sharp areas to cut or damage any dive gear!
If your using for sidemount diving you can use these as a rear mounting point for bungee loops or secure your canister light with this great little product
Rounded edges make sure their is not sharp areas to cut or damage any dive gear!
If your using for sidemount diving you can use these as a rear mounting point for bungee loops or secure your canister light with this great little product
Check out Hog's tri-glide n the standard finish and check out some awesome features
This is a brushed satin stainless steel material in a Black finish
You can clip off on either side of this glide or use it on your waist strap and face the D position downwards for an easy gauge clip off
The slots are wide enough to be able to slide 2 pieces of webbing through it or a simple slide into the right position then take a look this special tri-glide
So we finally have them in! Our Stealth black powder coated hardware is tough and very durable. These are the same bent d-ring with stainless steel under our tough black powder coating! Welcome to our stealth series of hardware
Our sliders are made for us and are made to our specs which allows us to make these a heavy duty style! These will not bend or twist like the thinner ones most retailers sell!
Stainless Steel Slide w/teeth and black powder coating over them
Made from high quality stainless material underneath
2" width
Great for locking items on your harness
304 Grade Stainless Steel under the tough black powder coating!
Our sliders are made for us and are made to our specs which allows us to make these a heavy duty style! These will not bend or twist like the thinner ones most retailers sell!
Stainless Steel Slide w/teeth
Made from high quality stainless material
2" width
This slider has the raised center bar divers like to have! Allows you to move thicker webbing easy slot the slots
So we finally have them in! Our Stealth black powder coated hardware is tough and very durable. These are the same bent d-ring with stainless steel under our tough black powder coating! Welcome to our stealth series of hardware
Our sliders are made for us and are made to our specs which allows us to make these a heavy duty style! These will not bend or twist like the thinner ones most retailers sell!
Stainless Steel Slide w/ no teeth and black powder coating over them
Made from high quality stainless material underneath
2" width
Great for locking items on your harness
304 Grade Stainless Steel under the tough black powder coating!
Our sliders are made for us and are made to our specs which allows us to make these a heavy duty style! These will not bend or twist like the thinner ones most retailers sell!
Stainless Steel Slide smooth
Made from high quality stainless material
2" width
Great for locking items on your harness
This slider has the raised center bar divers like to have!
These will allow you to adjust your gear a little easier than the tooth version
Check out Hog's tri-glide n the standard finish and check out some awesome features
This is a brushed satin stainless steel material
You can clip off on either side of this glide or use it on your waist strap and face the D position downwards for an easy gauge clip off
The slots are wide enough to be able to slide 2 pieces of webbing through it or a simple slide into the right position then take a look this special tri-glide
- Scuba diving weight belt keeper with double bent D ring. For use on any 2" inch webbing! You can place this keeper on your waist or shoulder webbing for even more ways to secure your dive items
- Durable, strong, lightweight, anti-corrosion and portable. - Universal fits all standard 2"/5cm wide webbing belts/harness. - Effectively prevents weight belt releasing accidentally.
- Great piece to clip off for your spg! Use for the rear part of your harness and clip off smb's and liftbags - Great replacement gear accessories for scuba diving BCD, free diving, snorkeling.
Specification:
- Material: 304 Stainless steel - Length: Approx. 13.4cm/5.3 inch - Width: Approx. 3.7cm/1.5 inch - Color: Silver
Rounded edges make sure their is not sharp areas to cut or damage any dive gear!
If your using for sidemount diving you can use these as a rear mounting point for bungee loops or secure your canister light with this great little product
Our latest stamped out stainless steel piece uses a 2" inch wide slot to secure and a single pass through slot that will fit upto an 1 1/2" inch wide for better harness routing with the smaller webbing
All edges a super smooth so your webbing will not be damaged by running though the slots!
Our latest stamped out stainless steel piece uses a 2" inch wide slot to secure and a single pass through slot also 2" inches wide for better harness routing
All edges a super smooth so your webbing will not be damaged by running though the slots!
With continuous weave harnesses, it can often be difficult to tighten the shoulders by pulling on the waist straps. This is due to friction caused by the tortuous path that the webbing makes as it goes through the dual slots in the backplate.
This Slide Bar mounts on the back of the plate "Stainless or Alum", between the slots. The slick, rounded surface minimizes the friction and makes the waist straps easier to pull through. Plus with the raised edges it helps keep the webbing from wondering off and causing issues when you pull your harness to tighten it to your body
Place these near the bottom sides on the left and right webbing slots to make these work properly
Diving where space is tight? Need to be flexible? We may have just the solution for you
Great for side-mount diving, cave, wreck or general use! You will find this ring for many uses
This large heavy duty o-ring slides around your 2" inch / 50mm webbing to create a flexible d-ring
You can just slide the ring if you want it to move around on your webbing or choose one of our sliders to meet your diving needs from our drop down boxes
The ring is roughly 1/4" thick so it will hold up to your diving demands
You can use on your chest area or waist!
Have a problem while diving just take your knife and cut yourself free with no issues
Color is black
Material is a rubber / 70 duro
You can also slide these onto 2" inch webbing and hold a pocket in place!
Comes only has a ring! You have to add one of our sliders if you want them for use
So our latest product is a slightly altered tri-glide that used to be made but we made some changes to it!
The issue with the older one it was just a slight bit to long depending on your mounting location so we shorten it slightly allowing you to mount it without causing any interference..
We make this product in the Usa! and it is made out of a marine grade 304 stainless steel
We have these tumbled for 48 hours allowing you to get a smooth edge product and nothing to cut your webbing with sharpe edges
Overall length:3 1/2" inches
Webbing slot is 2" inches wide / smooth no teeth design... Works with any 2" inch scuba webbing
Overall Width: 1 3/8" inches at the widest point
2 Clips points on either side or purchase two and a chest strap and you have a daul funtion piece
This will work with our any of our 2" webbing is not a problem
We also tumbled these for 48 hours to give them an ultra soft edge and will not cut or damage your webbing
Made from marine grade 304 stainless steel so you know it will not rust for a longer life!
Lastly we added holes for both 1/8" & 3/16" bungee or latex tubing if you want to secure a piece of dive gear plus you can add any of our 2" inch d-rings to go with this tri-glide and still be able to use your bungee or latex tubing
This is a wider slot opening allowing you to run 2 pieces of webbing through the slot if you want or need to.
We also use a higher grade of stainless steel improving it from rusting in salt water use but this slide has a thinner but stronger material making sure this one will not bend under pressure of your webbing during use
This is one of our heavy duty slider versions which allows you to use thicker webbing or looping two pieces of webbing through will not be an issue with this webbing
Your standard slide has an opening of under roughly 1/4" inch and this slide has a 1/4" opening making it a perfect slide for when you need to run two "2" pieces of webbing thru a slot much easier then a standard slide.. No more fighting to get your webbing thru with this slide it now is simple and holds your webbing securely in place
Overall dimensions: 1 1/8 inch wide x 2 7/16 long with a slot opening of 1/4" inch
With continuous weave harnesses, it can often be difficult to tighten the shoulders by pulling on the waist straps. This is due to friction caused by the tortuous path that the webbing makes as it goes through the dual slots in the backplate.
This Slide Bar mounts on the back of the plate "Stainless or Alum", between the slots. The slick, rounded surface minimizes the friction and makes the waist straps easier to pull through. Plus with the raised edges it helps keep the webbing from wondering off and causing issues when you pull your harness to tighten it to your body
Place these near the bottom sides on the left and right webbing slots to make these work properly
Slots will allow you to even run any 2" inch thick webbing or in some cases you can double up.
1/4" inch slot width for your webbing opening
2" wide to allow your webbing to slide in with no issues
These are strong and will not bend
Great for locking items on your harness
These will allow you to adjust your gear a little easier than the tooth version
Piranha's Price: $3.74
Sliders and Tri-Glides That Hold Without Chewing Webbing
Position hardware exactly where you want it and leave it there. Our no-teeth sliders and tri-glides come in anodized aluminum for sidemount and canister mounting, in silver, ocean blue, rocket red, orange and tec black, and in professional POM grade plastic with a raised centre bar in neon yellow, neon green and ocean blue. Aluminum sets ship as two-piece packs.
