The new D3 1st stage offers better performance than the D1 in a smaller size and utilizes several of the suggestions users made on how to make the D1 even better. With the hose routing of a Piston regulator, but the durability and cold water benefits of a diaphragm regulator, the D3 is a true industry innovation
Features:
Turret swivel will rotate a full 360 degree with the hoses attached in any LP port, without hanging up on the DIN handwheel. Replaceable hard HP seat, this will allow for better first stage performance, easier serviceability, and a longer regulator lifespan.
*Balanced Diaphragm
*2 HP
*5 LP Ports
*Compact size
*Routes like a balanced piston but is a Diaphragm!
*5 Port LP Swivel rotates 360 degrees with hoses, unlike most tech swivel regulators.
* All the high performance of the HOG D1 in a smaller package!
* For this special Edition we removed the swivel and instead went with a compact main body.
* The high gas flow rate and breathing performance of this first stage provides plenty of gas for all technical and extended range dives and comes ready for use with elevated oxygen applications (100 percent Oxygen to 2400psi, 80 percent Oxygen to 3400 psi out of box when new).
* When the HOG D2 first stage is matched with the HOG technical second stage, and your choice of hose lengths, this provides the perfect regulator for demanding dives.
The Hog D1X a Balanced 1st with Environmental first stage regulator is designed for Technical Divers! Technical divers demand performance, durability, and dependability from their gear... HOG delivers. At a shockingly low price. You can easily pay three times more and get a less capable regulator.
Our latest din cap has a large knurled head that open at the top to allow you to place spare o-rings inside! No more looking for o-rings when you can open the top of the cap and select from the o-rings you pre saved in there
Large kurling to add or remove this din female cap with ease
Has a lanyard to secure your cap from loosing it
Made out of an nylon material which is durable
Works on either 200 or 300 bar first stage din units
The Hog D1X a Balanced 1st with Environmental first stage regulator is designed for Technical Divers! Technical divers demand performance, durability, and dependability from their gear... HOG delivers. At a shockingly low price. You can easily pay three times more and get a less capable regulator.
Key Features:
High-Pressure Ports: 2 HP Ports
Low-Pressure Ports: 5 LP Ports
First Stage Type: Diaphragm, Balanced
Environmental Kit
Swivel 1st Stage
5x3.5 inches12.7x8.89
2 lbs.907185 kgThe Hog D1X a Balanced 1st with Environmental first stage regulator is designed for Technical Divers! Technical divers demand performance, durability, and dependability from their gear... HOG delivers. At a shockingly low price. You can easily pay three times more and get a less capable regulator.
Key Features:
High-Pressure Ports: 2 HP Ports
Low-Pressure Ports: 5 LP Ports
First Stage Type: Diaphragm, Balanced
Environmental Kit
Swivel 1st Stage
5x3.5 inches12.7x8.89
2 lbs.907185 kgThe Hog D1X a Balanced 1st with Environmental first stage regulator is designed for Technical Divers! Technical divers demand performance, durability, and dependability from their gear... HOG delivers. At a shockingly low price. You can easily pay three times more and get a less capable regulator.
The new D3 1st stage offers better performance than the D1 in a smaller size and utilizes several of the suggestions users made on how to make the D1 even better. With the hose routing of a Piston regulator, but the durability and cold water benefits of a diaphragm regulator, the D3 is a true industry innovation
Features:
Turret swivel will rotate a full 360 degree with the hoses attached in any LP port, without hanging up on the DIN hand wheel. Replaceable hard HP seat, this will allow for better first stage performance, easier serviceability, and a longer regulator life span.
Our drysuit inflation / pony bottle valve is a self-contained integrated valve and first stage assembly that fits any 3/4" scuba thread cylinder on the market today. You can even use this with argon if you wanted too
Measuring only 3 1/4" inches tall "Overall Length"
Our valve is complete! With features such as a low pressure swivel for your hose! Includes a psi/bar small spg installed on the valve!
The regulator first stage has a balanced piston with an intermediate pressure set at the factory at 100 psi so you are ready to go right out of the box! These valves are ready for nitrox use also!
The IP on this valve can be adjusted and you should have a qualified regulator technician do any adjustments on the IP unless you have been trained to do so!
Features
3 LP hose ports ready for use and a 3rd port has a low pressure swivel ball adapter included
1 HP hose port has a small pony gauge "psi/bar" included and is pointed up for easy viewing
Safety assembly (burst disk) already installed on the unit
One way fill valve port for easy filling with a rubber protective cap "You may need to purchase a fill adapter if you do not have one already! Please see below"
Short cave stlye black knob on the valve for easy on/off
The new D3 1st stage offers better performance than the D1 in a smaller size and utilizes several of the suggestions users made on how to make the D1 even better. With the hose routing of a Piston regulator, but the durability and cold water benefits of a diaphragm regulator, the D3 is a true industry innovation
Features:
Turret swivel will rotate a full 360 degree with the hoses attached in any LP port, without hanging up on the DIN handwheel. Replaceable hard HP seat, this will allow for better first stage performance, easier serviceability, and a longer regulator lifespan.
*Balanced Diaphragm
*2 HP
*5 LP Ports
*Compact size
*Routes like a balanced piston but is a Diaphragm!
*5 Port LP Swivel rotates 360 degrees with hoses, unlike most tech swivel regulators.
We now have a high quality first stage that is nitrox ready "Good for up to 40% right out of the box!" We recommend that you clean this first stage if you plan on using beyond 40% for safety
Our first stage has 1 7/16 high pressure port
It also has 4 3/8 low pressure ports to meet all your equipment add on needs
Intermediate Pressure is set at 140-145 psi for best overall performance
Need a drysuit inflation system add this first stage and build a less expensive system!
Use this first stage on your stage or pony bottles
And yes we have the rebuild kits for these jewels. These kits are also nitrox ready parts
Balance piston system
High quality knurled screw to turn easy
This a Yoke connection and will fit any type of yoke fitting on the market today
You will not find a better valve for a quality first stage as this one!
This part is NITROX READY right out of the packaging!
Also note that when it comes time to rebuild this first stage we can also do that for you too if you need someone to do this
NOTE: When ordering a rebuild kit order the #810 kit!
Our drysuit inflation / pony bottle valve is a self-contained integrated valve and first stage assembly that fits any 3/4" scuba thread cylinder on the market today. You can even use this with argon if you wanted too
Measuring only 3 1/4" inches tall "Overall Length"
Our valve is complete! With features such as a low pressure swivel for your hose! Includes a psi/bar small spg installed on the valve!
The regulator first stage has a balanced piston with an intermediate pressure set at the factory at 100 psi so you are ready to go right out of the box! These valves are ready for nitrox use also!
The IP on this valve can be adjusted and you should have a qualified regulator technician do any adjustments on the IP unless you have been trained to do so!
Uses a #813 rebuild kit and these are made with viton o-rings!
This model uses are threaded fill adapters. You need one of these if you do not have one to fill your cylinder with. If you are not sure which one is best suited for your use please either email or call us to find the correct one
Features
2 LP hose ports ready for use and a 3rd port has a low pressure swivel ball adapter included
1 HP hose port has a small pony gauge "psi/bar" included and is pointed up for easy viewing
Safety assembly (burst disk) already installed on the unit
NOTICE: One way fill valve port for easy filling with a rubber protective cap "You may need to purchase a fill adapter if you do not have one already! Please see below"
Short cave style RED knob on the valve for easy on/off that is highly visible
We now have a high quality first stage that is nitrox ready "Good for up to 40% right out of the box!" We recommend that you clean this first stage if you plan on using beyond 40% for safety
Our first stage has 1 7/16 high pressure port
It also has 3 3/8 low pressure ports to meet all your equipment add on needs
Intermediate Pressure 125-145 psi
Need a drysuit inflation system add this first stage and build a less expensive system!
Use this first stage on your stage or pony bottles
Note: The new model now uses a high impact plastic handwheel! This will take a beating and keep on working
And yes we have the rebuild kits for these jewels. These kits are also nitrox ready parts
Balance piston system
High quality knurled screw to turn easy
This a 300 bar din fitting so it works on both a 300 or 200 bar valve!
You will not find a better valve for a quality first stage as this one!
Don't forget to get the fill adapter below with our delrin cap at a special savings!
This part is NITROX READY right out of the packaging!
Also note that when it comes time to rebuild this first stage we can also do that for you too if you need someone to do this
NOTE: When ordering a rebuild kit order the #810 kit!
Our newest drysuit / pony bottle valve now uses a quick fill nozzle so no more screwing your fill adapter on you just push on and push off!!
Our drysuit inflation / pony bottle valve is a self-contained integrated valve and first stage assembly that fits any 3/4" scuba thread cylinder on the market today. You can even use this with argon if you wanted too
Measuring only 3 1/4" inches tall "Overall Length"
Our valve is complete! With features such as a low pressure swivel for your hose! Includes a psi/bar small spg installed on the valve!
The regulator first stage has a balanced piston with an intermediate pressure set at the factory at 100 psi so you are ready to go right out of the box! These valves are ready for nitrox use also!
The IP on this valve can be adjusted and you should have a qualified regulator technician do any adjustments on the IP unless you have been trained to do so!
Features
3 LP hose ports ready for use and a 3rd port has a low pressure swivel ball adapter included
1 HP hose port has a small pony gauge "psi/bar" included and is pointed up for easy viewing
Safety assembly (burst disk) already installed on the unit
One way fill valve port for easy filling with a rubber protective cap "You may need to purchase a QD fill adapter if you do not have one already! Please see below"
Short cave stlye black knob on the valve for easy on/off
The Hog D1X a Balanced 1st with Environmental first stage regulator is designed for Technical Divers! Technical divers demand performance, durability, and dependability from their gear... HOG delivers. At a shockingly low price. You can easily pay three times more and get a less capable regulator.
Key Features:
High-Pressure Ports: 2 HP Ports
Low-Pressure Ports: 5 LP Ports
First Stage Type: Diaphragm, Balanced
Environmental Kit
Swivel 1st Stage
5x3.5 inches12.7x8.89
2 lbs.907185 kgThe Hog D1X a Balanced 1st with Environmental first stage regulator is designed for Technical Divers! Technical divers demand performance, durability, and dependability from their gear... HOG delivers. At a shockingly low price. You can easily pay three times more and get a less capable regulator.
Key Features:
High-Pressure Ports: 2 HP Ports
Low-Pressure Ports: 5 LP Ports
First Stage Type: Diaphragm, Balanced
Environmental Kit
Swivel 1st Stage
5x3.5 inches12.7x8.89
2 lbs.907185 kgThe Hog D1X a Balanced 1st with Environmental first stage regulator is designed for Technical Divers! Technical divers demand performance, durability, and dependability from their gear... HOG delivers. At a shockingly low price. You can easily pay three times more and get a less capable regulator.
Convert your top of your first stage into another low pressure port!
Allows for cleaner hose routing
Simple to change with just a allen head tool
This is design fit to fit for use with our Piranha #804 first stage regulator! You will find our 804 first stage regulator in our regulator section under first stages!!
When traveling or on a boat trip you sometimes need to use a yoke system to connect your first stage to a "K" valve.
Remember always check before going to see if you need one!
Can be used on either a 300 or 232 bar fitting
This plating has a special finish and is slightly then the standard chrome plated din to yoke adapters.
Below is a little more info:
>Trivalent Chromium Finishing is a process used to coat metal surfaces with a protective layer that offers corrosion resistance, durability, and aesthetic appeal. Unlike hexavalent chromium, which has been linked to health and environmental concerns, trivalent chromium is considered a safer alternative. This finishing technique is widely adopted in industries such as automotive, aerospace, and electronics, where metal protection is critical. The process involves applying a chromium-based solution to metal parts, creating a thin, uniform layer that enhances longevity and performance.
Piranha's Price: $26.99
First Stage Regulators
First stages in the configurations divers here actually order. We stock Piranha Dive first stages with a swiveling turret in yoke and DIN non-sealed models, HOG D1 warm water non-sealed units, HOG D2 DIN sealed, HOG D3 yoke sealed, and 200 bar DIN to yoke converters so a DIN reg can be used on a yoke valve.
