Want to make your hoses last longer? Spray on the Tribolube SC solution every 4 to 6 months and it will keep your rubber hoses more flexible and allow them to last longer to prevent them from drying out and becoming stiff!
This product also works awesome for keeping your latex tubing from becoming stiff and drying out. Spray on every 4 to 6 months will keep your tubing working like new!
Our latest add from Aerospace Lubricants is Tribolube SC which is latex seal solution
This is a 4oz pump spray bottle that you use on your latex wrist or neck seal and by rubbing it in this will allow it to rejuvinate your seals for years of extended use
Other benefits include stopping dryrot and early degradation on your latex products
TRIBOLUBE SC is a conditioner suitable for use on the internal and external surfaces of dry suit seals, rubber products, neoprene, and latex material
TRIBOLUBE SC will extend the life of your equipment
TRIBOLUBE SC also stops oxidation, deterioration, dry rot, and corrosion caused by exposure to salt water and other outside elements!
TRIBOLUBE SC is ideal for all dry suit seals, wet suits, gloves, zippers, hoses, tubing, and any dive gear that can dry out and become brittle with use over the years!
TRIBOLUBE SC comes in a 4oz pump spray that can be shipped by AIR!
If you want to remove TRIBOLUBE SC from any area, for best results just use soap and warm water!
The male end is a standard 3/8 fitting that fits into most of the first stages on the market today
This Hose can be used on either a first stage to a buoyancy compensator or drysuit inflator connection
Working pressure of 250 psi ensures against hose failures
Burst pressure rating of 1200 psi gives you that extra safety margin
Hoses are built to a 4 to 1 hose working/bursting pressure rating
Our hoses are made in the USA with high quality fitting and hose materials
The fittings we use are made of high-quality brass with chrome plating for years of use
The QD quick disconnect inflator hose is mainly used with dry suit divers and this fitting helps solves the hose issue that many drysuit divers are faced with difficulty in connecting and disconnecting the inflator hose when diving with gloves
To use you must slide the collar back and push the hose onto the inflator or dry suit nipple and it snaps in place and stays in that locked position
When your ready to remove the QD inflator hose just pull back on the large collar at the fitting end to release it quickly!
This hose also solves many of the clearance issues found with many of the quick disconnect hoses on the market today
Notice: Our QD inflator hose will not work with buoyancy compensators fitted with Alternate Air Inflators and always test your connection prior to diving!
The male end is a standard 3/8 fitting that fits into most of the first stages on the market today
This Hose can be used on either a first stage to a buoyancy compensator or drysuit inflator connection
Working pressure of 250 psi ensures against hose failures
Burst pressure rating of 1200 psi gives you that extra safety margin
Hoses are built to a 4 to 1 hose working/bursting pressure rating
Our hoses are made in the USA with high quality fitting and hose materials
The fittings we use are made of high-quality brass with chrome plating for years of use
The QD quick disconnect inflator hose is mainly used with dry suit divers and this fitting helps solves the hose issue that many drysuit divers are faced with difficulty in connecting and disconnecting the inflator hose when diving with gloves
To use you must slide the collar back and push the hose onto the inflator or dry suit nipple and it snaps in place and stays in that locked position
When your ready to remove the QD inflator hose just pull back on the large collar at the fitting end to release it quickly!
This hose also solves many of the clearance issues found with many of the quick disconnect hoses on the market today
Notice: Our QD inflator hose will not work with buoyancy compensators fitted with Alternate Air Inflators and always test your connection prior to diving!
The male end is a standard 3/8 fitting that fits into most of the first stages on the market today
This Hose can be used on either a first stage to a buoyancy compensator or drysuit inflator connection
Working pressure of 250 psi ensures against hose failures
Burst pressure rating of 1200 psi gives you that extra safety margin
Hoses are built to a 4 to 1 hose working/bursting pressure rating
Our hoses are made in the USA with high quality fitting and hose materials
The fittings we use are made of high-quality brass with chrome plating for years of use
The QD quick disconnect inflator hose is mainly used with dry suit divers and this fitting helps solves the hose issue that many drysuit divers are faced with difficulty in connecting and disconnecting the inflator hose when diving with gloves
To use you must slide the collar back and push the hose onto the inflator or dry suit nipple and it snaps in place and stays in that locked position
When your ready to remove the QD inflator hose just pull back on the large collar at the fitting end to release it quickly!
This hose also solves many of the clearance issues found with many of the quick disconnect hoses on the market today
Notice: Our QD inflator hose will not work with buoyancy compensators fitted with Alternate Air Inflators and always test your connection prior to diving!
The male end is a standard 3/8 fitting that fits into most of the first stages on the market today
This Hose can be used on either a first stage to a buoyancy compensator or drysuit inflator connection
Working pressure of 250 psi ensures against hose failures
Burst pressure rating of 1200 psi gives you that extra safety margin
Hoses are built to a 4 to 1 hose working/bursting pressure rating
Our hoses are made in the USA with high quality fitting and hose materials
The fittings we use are made of high-quality brass with chrome plating for years of use
The QD quick disconnect inflator hose is mainly used with dry suit divers and this fitting helps solves the hose issue that many drysuit divers are faced with difficulty in connecting and disconnecting the inflator hose when diving with gloves
To use you must slide the collar back and push the hose onto the inflator or dry suit nipple and it snaps in place and stays in that locked position
When your ready to remove the QD inflator hose just pull back on the large collar at the fitting end to release it quickly!
This hose also solves many of the clearance issues found with many of the quick disconnect hoses on the market today
Notice: Our QD inflator hose will not work with buoyancy compensators fitted with Alternate Air Inflators and always test your connection prior to diving!
The male end is a standard 3/8 fitting that fits into most of the first stages on the market today
This Hose can be used on either a first stage to a buoyancy compensator or drysuit inflator connection
Working pressure of 250 psi ensures against hose failures
Burst pressure rating of 1200 psi gives you that extra safety margin
Hoses are built to a 4 to 1 hose working/bursting pressure rating
Our hoses are made in the USA with high quality fitting and hose materials
The fittings we use are made of high-quality brass with chrome plating for years of use
The QD quick disconnect inflator hose is mainly used with dry suit divers and this fitting helps solves the hose issue that many drysuit divers are faced with difficulty in connecting and disconnecting the inflator hose when diving with gloves
To use you must slide the collar back and push the hose onto the inflator or dry suit nipple and it snaps in place and stays in that locked position
When your ready to remove the QD inflator hose just pull back on the large collar at the fitting end to release it quickly!
This hose also solves many of the clearance issues found with many of the quick disconnect hoses on the market today
Notice: Our QD inflator hose will not work with buoyancy compensators fitted with Alternate Air Inflators and always test your connection prior to diving!
The male end is a standard 3/8 fitting that fits into most of the first stages on the market today
This Hose can be used on either a first stage to a buoyancy compensator or drysuit inflator connection
Working pressure of 250 psi ensures against hose failures
Burst pressure rating of 1200 psi gives you that extra safety margin
Hoses are built to a 4 to 1 hose working/bursting pressure rating
Our hoses are made in the USA with high quality fitting and hose materials
The fittings we use are made of high-quality brass with chrome plating for years of use
The QD quick disconnect inflator hose is mainly used with dry suit divers and this fitting helps solves the hose issue that many drysuit divers are faced with difficulty in connecting and disconnecting the inflator hose when diving with gloves
To use you must slide the collar back and push the hose onto the inflator or dry suit nipple and it snaps in place and stays in that locked position
When your ready to remove the QD inflator hose just pull back on the large collar at the fitting end to release it quickly!
This hose also solves many of the clearance issues found with many of the quick disconnect hoses on the market today
Notice: Our QD inflator hose will not work with buoyancy compensators fitted with Alternate Air Inflators and always test your connection prior to diving!
The male end is a standard 3/8 fitting that fits into most of the first stages on the market today
This Hose can be used on either a first stage to a buoyancy compensator or drysuit inflator connection
Working pressure of 250 psi ensures against hose failures
Burst pressure rating of 1200 psi gives you that extra safety margin
Hoses are built to a 4 to 1 hose working/bursting pressure rating
Our hoses are made in the USA with high quality fitting and hose materials
The fittings we use are made of high-quality brass with chrome plating for years of use
The QD quick disconnect inflator hose is mainly used with dry suit divers and this fitting helps solves the hose issue that many drysuit divers are faced with difficulty in connecting and disconnecting the inflator hose when diving with gloves
To use you must slide the collar back and push the hose onto the inflator or dry suit nipple and it snaps in place and stays in that locked position
When your ready to remove the QD inflator hose just pull back on the large collar at the fitting end to release it quickly!
This hose also solves many of the clearance issues found with many of the quick disconnect hoses on the market today
Notice: Our QD inflator hose will not work with buoyancy compensators fitted with Alternate Air Inflators and always test your connection prior to diving!
You are purchasing a 30" inch long large flange qd hose!
Our NEWest Large Flange Quick Disconnect BCD hose made now in a braided and color!
The male end is a standard 3/8 fitting that fits into most of the first stages on the market today
This Hose can be used on either a first stage to a buoyancy compensator or drysuit inflator connection
Working pressure of 500 psi ensures against hose failures
Burst pressure rating of 1500 psi gives you that extra safety margin
Hoses are built to a 4 to 1 hose working/bursting pressure rating
Our hoses are made in the USA with high quality fitting and hose materials
The fittings we use are made of high-quality brass with chrome plating for years of use
The QD quick disconnect inflator hose is mainly used with dry suit divers and this fitting helps solves the hose issue that many drysuit divers are faced with difficulty in connecting and disconnecting the inflator hose when diving with gloves
To use you must slide the collar back and push the hose onto the inflator or dry suit nipple and it snaps in place and stays in that locked position
When your ready to remove the QD inflator hose just pull back on the large collar at the fitting end to release it quickly!
This hose also solves many of the clearance issues found with many of the quick disconnect hoses on the market today
Notice: Our QD inflator hose will not work with buoyancy compensators fitted with Alternate Air Inflators and always test your connection prior to diving!
The male end is a standard 3/8 fitting that fits into most of the first stages on the market today
This Hose can be used on either a first stage to a buoyancy compensator or drysuit inflator connection
Working pressure of 250 psi ensures against hose failures
Burst pressure rating of 1200 psi gives you that extra safety margin
Hoses are built to a 4 to 1 hose working/bursting pressure rating
Our hoses are made in the USA with high quality fitting and hose materials
The fittings we use are made of high-quality brass with chrome plating for years of use
The QD quick disconnect inflator hose is mainly used with dry suit divers and this fitting helps solves the hose issue that many drysuit divers are faced with difficulty in connecting and disconnecting the inflator hose when diving with gloves
To use you must slide the collar back and push the hose onto the inflator or dry suit nipple and it snaps in place and stays in that locked position
When your ready to remove the QD inflator hose just pull back on the large collar at the fitting end to release it quickly!
This hose also solves many of the clearance issues found with many of the quick disconnect hoses on the market today
Notice: Our QD inflator hose will not work with buoyancy compensators fitted with Alternate Air Inflators and always test your connection prior to diving!
The male end is a standard 3/8 fitting that fits into most of the first stages on the market today
This Hose can be used on either a first stage to a buoyancy compensator or drysuit inflator connection
Working pressure of 250 psi ensures against hose failures
Burst pressure rating of 1200 psi gives you that extra safety margin
Hoses are built to a 4 to 1 hose working/bursting pressure rating
Our hoses are made in the USA with high quality fitting and hose materials
The fittings we use are made of high-quality brass with chrome plating for years of use
The QD quick disconnect inflator hose is mainly used with dry suit divers and this fitting helps solves the hose issue that many drysuit divers are faced with difficulty in connecting and disconnecting the inflator hose when diving with gloves
To use you must slide the collar back and push the hose onto the inflator or dry suit nipple and it snaps in place and stays in that locked position
When your ready to remove the QD inflator hose just pull back on the large collar at the fitting end to release it quickly!
This hose also solves many of the clearance issues found with many of the quick disconnect hoses on the market today
Notice: Our QD inflator hose will not work with buoyancy compensators fitted with Alternate Air Inflators and always test your connection prior to diving!
The male end is a standard 3/8 fitting that fits into most of the first stages on the market today
This Hose can be used on either a first stage to a buoyancy compensator or drysuit inflator connection
Working pressure of 250 psi ensures against hose failures
Burst pressure rating of 1200 psi gives you that extra safety margin
Hoses are built to a 4 to 1 hose working/bursting pressure rating
Our hoses are made in the USA with high quality fitting and hose materials
The fittings we use are made of high-quality brass with chrome plating for years of use
The QD quick disconnect inflator hose is mainly used with dry suit divers and this fitting helps solves the hose issue that many drysuit divers are faced with difficulty in connecting and disconnecting the inflator hose when diving with gloves
To use you must slide the collar back and push the hose onto the inflator or dry suit nipple and it snaps in place and stays in that locked position
When your ready to remove the QD inflator hose just pull back on the large collar at the fitting end to release it quickly!
This hose also solves many of the clearance issues found with many of the quick disconnect hoses on the market today
Notice: Our QD inflator hose will not work with buoyancy compensators fitted with Alternate Air Inflators and always test your connection prior to diving!
The male end is a standard 3/8 fitting that fits into most of the first stages on the market today
This Hose can be used on either a first stage to a buoyancy compensator or drysuit inflator connection
Working pressure of 250 psi ensures against hose failures
Burst pressure rating of 1200 psi gives you that extra safety margin
Hoses are built to a 4 to 1 hose working/bursting pressure rating
Our hoses are made in the USA with high quality fitting and hose materials
The fittings we use are made of high-quality brass with chrome plating for years of use
The QD quick disconnect inflator hose is mainly used with dry suit divers and this fitting helps solves the hose issue that many drysuit divers are faced with difficulty in connecting and disconnecting the inflator hose when diving with gloves
To use you must slide the collar back and push the hose onto the inflator or dry suit nipple and it snaps in place and stays in that locked position
When your ready to remove the QD inflator hose just pull back on the large collar at the fitting end to release it quickly!
This hose also solves many of the clearance issues found with many of the quick disconnect hoses on the market today
Notice: Our QD inflator hose will not work with buoyancy compensators fitted with Alternate Air Inflators and always test your connection prior to diving!
The male end is a standard 3/8 fitting that fits into most of the first stages on the market today
This Hose can be used on either a first stage to a buoyancy compensator or drysuit inflator connection
Working pressure of 250 psi ensures against hose failures
Burst pressure rating of 1200 psi gives you that extra safety margin
Hoses are built to a 4 to 1 hose working/bursting pressure rating
Our hoses are made in the USA with high quality fitting and hose materials
The fittings we use are made of high-quality brass with chrome plating for years of use
The QD quick disconnect inflator hose is mainly used with dry suit divers and this fitting helps solves the hose issue that many drysuit divers are faced with difficulty in connecting and disconnecting the inflator hose when diving with gloves
To use you must slide the collar back and push the hose onto the inflator or dry suit nipple and it snaps in place and stays in that locked position
When your ready to remove the QD inflator hose just pull back on the large collar at the fitting end to release it quickly!
This hose also solves many of the clearance issues found with many of the quick disconnect hoses on the market today
Notice: Our QD inflator hose will not work with buoyancy compensators fitted with Alternate Air Inflators and always test your connection prior to diving!
The male end is a standard 3/8 fitting that fits into most of the first stages on the market today
This Hose can be used on either a first stage to a buoyancy compensator or drysuit inflator connection
Working pressure of 250 psi ensures against hose failures
Burst pressure rating of 1200 psi gives you that extra safety margin
Hoses are built to a 4 to 1 hose working/bursting pressure rating
Our hoses are made in the USA with high quality fitting and hose materials
The fittings we use are made of high-quality brass with chrome plating for years of use
The QD quick disconnect inflator hose is mainly used with dry suit divers and this fitting helps solves the hose issue that many drysuit divers are faced with difficulty in connecting and disconnecting the inflator hose when diving with gloves
To use you must slide the collar back and push the hose onto the inflator or dry suit nipple and it snaps in place and stays in that locked position
When your ready to remove the QD inflator hose just pull back on the large collar at the fitting end to release it quickly!
This hose also solves many of the clearance issues found with many of the quick disconnect hoses on the market today
Notice: Our QD inflator hose will not work with buoyancy compensators fitted with Alternate Air Inflators and always test your connection prior to diving!
The male end is a standard 3/8 fitting that fits into most of the first stages on the market today
This Hose can be used on either a first stage to a buoyancy compensator or drysuit inflator connection
Working pressure of 250 psi ensures against hose failures
Burst pressure rating of 1200 psi gives you that extra safety margin
Hoses are built to a 4 to 1 hose working/bursting pressure rating
Our hoses are made in the USA with high quality fitting and hose materials
The fittings we use are made of high-quality brass with chrome plating for years of use
The QD quick disconnect inflator hose is mainly used with dry suit divers and this fitting helps solves the hose issue that many drysuit divers are faced with difficulty in connecting and disconnecting the inflator hose when diving with gloves
To use you must slide the collar back and push the hose onto the inflator or dry suit nipple and it snaps in place and stays in that locked position
When your ready to remove the QD inflator hose just pull back on the large collar at the fitting end to release it quickly!
This hose also solves many of the clearance issues found with many of the quick disconnect hoses on the market today
Notice: Our QD inflator hose will not work with buoyancy compensators fitted with Alternate Air Inflators and always test your connection prior to diving!
The male end is a standard 3/8 fitting that fits into most of the first stages on the market today
This Hose can be used on either a first stage to a buoyancy compensator or drysuit inflator connection
Working pressure of 250 psi ensures against hose failures
Burst pressure rating of 1200 psi gives you that extra safety margin
Hoses are built to a 4 to 1 hose working/bursting pressure rating
Our hoses are made in the USA with high quality fitting and hose materials
The fittings we use are made of high-quality brass with chrome plating for years of use
The QD quick disconnect inflator hose is mainly used with dry suit divers and this fitting helps solves the hose issue that many drysuit divers are faced with difficulty in connecting and disconnecting the inflator hose when diving with gloves
To use you must slide the collar back and push the hose onto the inflator or dry suit nipple and it snaps in place and stays in that locked position
When your ready to remove the QD inflator hose just pull back on the large collar at the fitting end to release it quickly!
This hose also solves many of the clearance issues found with many of the quick disconnect hoses on the market today
Notice: Our QD inflator hose will not work with buoyancy compensators fitted with Alternate Air Inflators and always test your connection prior to diving!
Piranha's Price: $35.59
Quick Disconnect Large Flange and Drysuit Hoses
Drysuit inflation runs shorter than a BC hose, and the length matters. We stock quick disconnect inflator hoses in 18, 20, 21, 22 and 24 inch lengths with large flange fittings, so you can route to a chest or shoulder inflator without a loop of slack. Tribolube SC is stocked alongside for servicing the fitting.
