The HOG 23lb Wing is the ideal choice for single cylinder diving when the lift provided is sufficient.
The HOG 23lb Wing features a extremely low profile 360 degree donut wing design.
The center of the HOG 23lb Wing features cam strap slots for use use the HOG backplate without a Single Tank Adapter or can be used with any Backplate with a 11" bolt holes (most on the market) with the use of a Single Tank Adapter.
23lb Lift Capacity
360 Degree Oval/Donut Shape Design
90 Degree Elbow Low Profile Design
Cam Strap Slots for use with the HOG Back Plate without a STA Center Mounted Inflator Elbow
1680 Denier Ballistic Outer Nylon Shell
220 Denier Inner Bladder
Oval Style Corrugated Hose
HOG Wing Metal Inflator
EDGE/HOG highly recommends that non qualified individuals seek professional training/mentoring before attempting repairs or servicing on EDGE/HOG products. EDGE/HOG dealers are also able to perform all warranty, repair and service work on your EDGE/HOG product. EDGE/HOG recommends that divers participation in more advanced technical and exploration type diving be trained in equipment service and has made HOG Service Clinics available thru the participating EDGE/HOG dealers.
Lifetime warranty against manufacture defects (transferable) and a industry first 10 year Pinch Flat warranty for the original owner.
HOG Wings are designed not only with performance and durability in mind but also affordability. The 360 degree wing shape provides ideal body positioning without the worry of air trapping commonly associated with horseshoe shaped wings.
32lb buoyancy, 360 degree circular wing design
Made out of 840 denier in all Black Cordura Nylon protective outer covering
Replaceable 420 Hi-tenacity denier TPU coated inner air bladder
18" inch / 46cm rubber corrugated hose
28" inch / 71.12 cm low pressure rubber Inflator hose
3 sets of 11 inch on center mounting holes
Integrated soft side single tank mounting plate
Low profile classic pull dump - located on left inside hip
BLK/Red T2 Inflator
Includes Bungee Loops
Specifications:
Size: 46cm wide x 63cm long x 12cm deep (Inflated)
HOG Wings are designed not only with performance and durability in mind but also affordability. The 360 degree wing shape provides ideal body positioning without the worry of air trapping commonly associated with horseshoe shaped wings.
32lb buoyancy, 360 degree circular wing design
Made out of 840 denier Black w/Red trim Cordura Nylon protective outer covering
Replaceable 420 Hi-tenacity denier TPU coated inner air bladder
18" inch / 46cm rubber corrugated hose
28" inch / 71.12 cm low pressure rubber Inflator hose
3 sets of 11 inch on center mounting holes
Integrated soft side single tank mounting plate
Low profile classic pull dump - located on left inside hip
BLK/Red T2 Inflator
Includes Bungee Loops
Specifications:
Size: 46cm wide x 63cm long x 12cm deep (Inflated)
*Is in a large diameter 3mm Kernmantle Pull Cord? *Most Standard OPVs are furnished with thin cords and plastic pull knobs.
*To reduce entanglements and inadvertant wing venting many divers remove the plastic pull or toggle and add a longer pull cord. *The larger diameter cords are much easier to grasp and use, particularly with gloves.
**There are two problems with changing to a larger cord. Standard OPVs are not designed to use larger cords. The holes in the Outer Cage and inner seat retainer are too small and have to be drilled out, and the available space in the inner seat retainer is too small to accomodate the inner knot on the pull cord.
**The first problem is easily solved, just drill out the plastic parts. The second problem, too small a recess for the inner nut is not.
**Some will try to fit a large knot in a small recess by heating and melting the knot. This had resulted in failures of the pull cord.
**The DSS Solution was to redesign the inner seat retainer to accomodate a larger knot. This redesigned seat retainer also requires a new OPV CAGE or outer cover because the new seat retainer is taller.
**The DSS OPV kit includes the new Cage, SS Spring, 3mm x 5 inch Kernmantle pull cord, inner seat Retainer and Soft Seat. The soft seat is made of a thermoplastic elastomer, all other molded parts are Delrin.
*** Wings with three piece threaded through fittings will also require a DSS Hex outer or Double nut. You can order the hex nut if you need it in our drop down box!
We now have a high quality Bright PINK 30lb lift donut style wing for those looking for a quality wing at a Piranha Price and do not let the price fool you this wing it comes with a tough quality outer shell with all the high end features you want from a wing!
Your donut wing comes with following:
30lb lift Donut type wing with 4 tank cam band slots in the wing for your tank bands for use without a single tank adapter if you choose or we have dual height grommets so you can fine tune your balance in the water or you can use those holes with a single tank adapter and lastly for tank bands for doubles!
Both the grommet holes and the slots allow you to fine tune your balance by moving your wing height. The grommet holes are 11" inches on center so any single tank adapter will fit your wing if you plan on using one!
The outer shell is made from a tough 1050 Cordura material
Want to get to the inside of your wing? No problem just use our zipper on the inside part on the front side of your wing to easily get inside to do a quick patch if needed or just to keep clean your wing!
K type oral inflator hose and inflator plus a low pressure rubber BC hose,
Need to get to the bladder? No problem we use a high quality zipper to open your outer shell to get to work on your bladder if needed!
Also at the top on the backside is a handle to lift your wing sewn into the donut material!
Specification:
Material: Inner Shell: 420D TPU Coated Cloth in Black Outer Shell: 1050D Cordura Connector: TPU Colorectal Tube: Rubber
Size Chart:
Donut: When not inflated 64cmx 43cm/////25.2inch x 16.93" inches
When inflating 64cm x 38cmx13.5cm/////25.2inch x 14.96
We now have a high quality Bright PINK 30lb lift donut style wing for those looking for a quality wing at a Piranha Price and do not let the price fool you this wing it comes with a tough quality outer shell with all the high end features you want from a wing!
Your donut wing comes with following:
30lb lift Donut type wing with 4 tank cam band slots in the wing for your tank bands for use without a single tank adapter if you choose or we have dual height grommets so you can fine tune your balance in the water or you can use those holes with a single tank adapter and lastly for tank bands for doubles!
Both the grommet holes and the slots allow you to fine tune your balance by moving your wing height. The grommet holes are 11" inches on center so any single tank adapter will fit your wing if you plan on using one!
The outer shell is made from a tough 1050 Cordura material
Want to get to the inside of your wing? No problem just use our zipper on the inside part on the front side of your wing to easily get inside to do a quick patch if needed or just to keep clean your wing!
K type oral inflator hose and inflator plus a low pressure rubber BC hose,
Need to get to the bladder? No problem we use a high quality zipper to open your outer shell to get to work on your bladder if needed!
Also at the top on the backside is a handle to lift your wing sewn into the donut material!
Specification:
Material: Inner Shell: 420D TPU Coated Cloth in Black Outer Shell: 1050D Cordura Connector: TPU Colorectal Tube: Rubber
Size Chart:
Donut: When not inflated 64cmx 43cm/////25.2inch x 16.93" inches
When inflating 64cm x 38cmx13.5cm/////25.2inch x 14.96
We now have a high quality Bright PINK 30lb lift donut style wing for those looking for a quality wing at a Piranha Price and do not let the price fool you this wing it comes with a tough quality outer shell with all the high end features you want from a wing!
Your donut wing comes with following:
30lb lift Donut type wing with 4 tank cam band slots in the wing for your tank bands for use without a single tank adapter if you choose or we have dual height grommets so you can fine tune your balance in the water or you can use those holes with a single tank adapter and lastly for tank bands for doubles!
Both the grommet holes and the slots allow you to fine tune your balance by moving your wing height. The grommet holes are 11" inches on center so any single tank adapter will fit your wing if you plan on using one!
The outer shell is made from a tough 1050 Cordura material
Want to get to the inside of your wing? No problem just use our zipper on the inside part on the front side of your wing to easily get inside to do a quick patch if needed or just to keep clean your wing!
K type oral inflator hose and inflator plus a low pressure rubber BC hose,
Need to get to the bladder? No problem we use a high quality zipper to open your outer shell to get to work on your bladder if needed!
Also at the top on the backside is a handle to lift your wing sewn into the donut material!
Specification:
Material: Inner Shell: 420D TPU Coated Cloth in Black Outer Shell: 1050D Cordura Connector: TPU Colorectal Tube: Rubber
Size Chart:
Donut: When not inflated 64cmx 43cm/////25.2inch x 16.93" inches
When inflating 64cm x 38cmx13.5cm/////25.2inch x 14.96
We now have a high quality Bright PINK 30lb lift donut style wing for those looking for a quality wing at a Piranha Price and do not let the price fool you this wing it comes with a tough quality outer shell with all the high end features you want from a wing!
Your donut wing comes with following:
30lb lift Donut type wing with 4 tank cam band slots in the wing for your tank bands for use without a single tank adapter if you choose or we have dual height grommets so you can fine tune your balance in the water or you can use those holes with a single tank adapter and lastly for tank bands for doubles!
Both the grommet holes and the slots allow you to fine tune your balance by moving your wing height. The grommet holes are 11" inches on center so any single tank adapter will fit your wing if you plan on using one!
The outer shell is made from a tough 1050 Cordura material
Want to get to the inside of your wing? No problem just use our zipper on the inside part on the front side of your wing to easily get inside to do a quick patch if needed or just to keep clean your wing!
K type oral inflator hose and inflator plus a low pressure rubber BC hose,
Need to get to the bladder? No problem we use a high quality zipper to open your outer shell to get to work on your bladder if needed!
Also at the top on the backside is a handle to lift your wing sewn into the donut material!
Specification:
Material: Inner Shell: 420D TPU Coated Cloth in Black Outer Shell: 1050D Cordura Connector: TPU Colorectal Tube: Rubber
Size Chart:
Donut: When not inflated 64cmx 43cm/////25.2inch x 16.93" inches
When inflating 64cm x 38cmx13.5cm/////25.2inch x 14.96
We now have a high quality Awesome looking PURPLE 30lb lift donut style wing for those looking for a quality wing at a Piranha Price and do not let the price fool you this wing it comes with a tough quality outer shell with all the high end features you want from a wing!
Your donut wing comes with following:
30lb lift Donut type wing with 4 tank cam band slots in the wing for your tank bands for use without a single tank adapter if you choose or we have dual height grommets so you can fine tune your balance in the water or you can use those holes with a single tank adapter and lastly for tank bands for doubles!
Both the grommet holes and the slots allow you to fine tune your balance by moving your wing height. The grommet holes are 11" inches on center so any single tank adapter will fit your wing if you plan on using one!
The outer shell is made from a tough 1050 Cordura material
Want to get to the inside of your wing? No problem just use our zipper on the inside part on the front side of your wing to easily get inside to do a quick patch if needed or just to keep clean your wing!
K type oral inflator hose and inflator plus a low pressure rubber BC hose,
Need to get to the bladder? No problem we use a high quality zipper to open your outer shell to get to work on your bladder if needed!
Also at the top on the backside is a handle to lift your wing sewn into the donut material!
Specification:
Material: Inner Shell: 420D TPU Coated Cloth in Black Outer Shell: 1050D Cordura Connector: TPU Colorectal Tube: Rubber
Size Chart:
Donut: When not inflated 64cmx 43cm/////25.2inch x 16.93" inches
When inflating 64cm x 38cmx13.5cm/////25.2inch x 14.96
Threading Slot: 13cm x 0.7cm/5.12inch x 0.28" inches
Package Includes:
1 Scuba Diving Donut Wing Single Tank 30lbs lift 1 Low Pressure BC Inflator Hose 1 Rubber corrugated oval inflator hose
4 Threading Slots / Plus Dual Grommeted holes! 1 K Type Oral Inflator
Piranha's Price: $229.99
Wings for Singles and Doubles
Choose lift by the rig you dive, not by what is on the shelf. We carry 23lb HOG donut wings for singles, IST 30lb donut wings in black, red, blue and high viz yellow, and 40lb donut tec wings for doubles. Pair a wing with a backplate, single tank adapter and harness from the related categories below to build a complete setup in one order.
