The Large Hog Utility Pro BC Pocket is for HOG and other harness BCDs with 2" webbing.
Uses velcro to secure the front of the pocket and keep your items inside!
Has a 2" inch wide slot for use with any 2" inch webbing! Want to hold it in place? Then check out our weight belt clips in our accessory section to keep this pocket or any type of pocket from sliding!!
* This pocket is not just for IST products but can be used in many diving applications!
* Uses an inner sleeve on the backside to which you can slide 2" inch webbing through it for a stable weight pocket
* Uses an inner pocket to hold your weight "Up to 8.8lbs!
* The outer end of this pocket is made from a 1680D Heavy Duty nylon allowing you to dive in the harest conditions since this pocket will hold up!
* Has a 5mm D-Ring on the outside to clip items as you see fit
* A simple heavy dity plastic buckle hols your weights in place and by releasing the buckle your weights will come right out!* You can use this weight pocket with alum or stainless backplates. It has a grommet at the end of the pocket which you can use an assembly pocket to lock this pocket in place by or use weight belt clips to hold in place and not move around during a dive
* So you can use this on a backplate or your general harness with no issues!
* The inner pocket is made out of 420D nylon material
** Sold has a single pocket! Want a pair please make sure to order 2!
8.8lb (4kg) weight capacity. Outer pouch dimensions: 6 x 7 x 1.5 inches (15.24 x 17.78 x 3.81cm)
Inner pouch dimensions: appx 5 x 5.5 x 1.25 inches (12.7 x 13.97 x 3.18cm
The IST WP7 Heavy Duty, Dual Quick Release Tech BCD Weight Pocket, 15.4lb provides multiple mounting options, and a dual quick release system for maximum safety and convenience.
420D woven nylon inner pouch offers a heavy duty zip closure, drainage grommet and nylon webbing pull strap. Outer pocket is constructed of ballistic grade, heavy duty, 1680D woven nylon canvas.
Three 1.5 inch wide loops of heavy duty nylon webbing on the back of the outer pocket can accommodate a belt width of up to 2.75 inches, depending on belt thickness. One loop is sewn on in a horizontal orientation and two in a vertical orientation, so you can position the pocket as you wish on your belt or, with an additional length of webbing, on your BCD backplate. Illustrated instructions for backplate mounting are included.
The pocket opens via a quick release buckle and Velcro® flap at one end, and with a dual, heavy duty zipper at the other. In an emergency, if obstruction, heavy gloves, injury, or other limitations interfere with operating the quick release buckle and Velcro® flap, unzip the opposite end to release the inner weight pouch. Extra-large zipper pulls make it easy to open the pocket in either direction.
Place your dive weight(s) up to a maximum capacity of 15.4lb (7kg) inside the inner pouch, zip closed, then insert into the outer pocket with the pull strap exposed at either the zipper or flap end, as you prefer. Close the outer quick release buckle and seal the Velcro® flap, and you’re ready to hit the water.
NOTE: Sold per pocket!
8.8lb (4kg) weight capacity.
Outer pocket dimensions: 6.5 x 9 x 2 inches (16.51 x 22.86 x 5.08cm)
Inner pouch dimensions: appx 5 x 8 x 1.75 inches (12.7 x 20.32 x 4.45cm)
Product Details:
Quick release weight pocket for attachment to backplate or belt opens at both ends
Constructed of heavy duty 420D and 1680D nylon canvas
Inner weight pouch pulls out quickly in an emergency
Heavy duty nylon webbing strap with quick release buckle and Velcro® flap
The Aquacrast deluxe regulator bag is made out of water resistance material keeping it dry and also has a drain gromet on the bottom of the bag to quickly remove any water after using your rig
Has the drain / air gromet on the bottom and also on the front of the bag is an air vent to help drying your rig out as quickly as possible
Has a molded rubber carry handle making handling a breeze
Will hold your reg with octo system in this bag
The bag uses dual opening zippers with nice pull tabgs making opening or closing easy
Nice travel / protective bag for your regulator kit
Large 13" inch round Padded regulator bag with a top carry handle
Also includes an inside clear zippered pocket
Comes with a shoulder strap for hands free carrying
Made of 600D Cordura Nylon
Measures 13" inch round diamter 3 Inches wide
Dive flag on both sides!
Piranha's Price: $17.99
Weight Pockets and Regulator Bags
Weight you can ditch or move between rigs without unthreading a belt. We stock Piranha Dive Mfg 4.4lb quick attach and release pockets sold per piece in pink, neon yellow, digital camo and blue camo, quick attach weight pockets, and deluxe removable small weight pockets in black and military green that also carry a knife or small kit.
