302.494.0982 CustomerCare@PiranhaDiveMFG.com We have Free Domestic Ground Shipping on Orders over $99.99!
Select Page

  1. Home >
  2. Scuba & Dive Gear >
  3. Rebreather Accessories >

  4. Rebreather Valves

Rebreather Valves & Shut Offs for Diving | CCR | Piranha Dive

Sort By:
Rebreather Valve BLACK Handwheel - Product Image
 Piranha's Price: $79.99

Rebreather Valve BLACK Handwheel

  • The Blue Steel valve uses a 200 bar outlet allowing you to use a 200 or 300 bar din fitting
  • This valve is made to be used specifically with rebreathers
  • You are purchasing a valve with a BLACK Handwheel!
  • Can be used either on diluent or oxygen cylinders "Assembled with oxygen service components"
  • Has a rubber bump stop located at the bottom to protect the valve!
  • Valve is chrome plated over brass
  • Uses short "cave style" handwheel on this valve "BLACK Handwheel"
  • Select your burst disk from the drop down box below
    •  
    Rebreather Valve GREEN Handwheel - Product Image
     Piranha's Price: $79.99

    Rebreather Valve GREEN Handwheel

  • The Blue Steel valve uses a 200 bar outlet allowing you to use a 200 or 300 bar din fitting
  • This valve is made to be used specifically with rebreathers
  • You are purchasing a valve with a GREEN Handwheel!
  • Can be used either on diluent or oxygen cylinders "Assembled with oxygen service components"
  • Has a rubber bump stop located at the bottom to protect the valve!
  • Valve is chrome plated over brass
  • Uses short "cave style" handwheel on this valve
  • Select your burst disk from the drop down box below
    •  
    Adapter 3/8-24 male to 9/16-18 male - Product Image
     Piranha's Price: $7.99

    Adapter 3/8-24 male to 9/16-18 male

  • 3/8-24 male end can either screw into your first stage low pressure port or any other threaded area using this thread size
  • The other end "9/16-18 male end will accept low pressure hose fitting or other threaded areas using this thread size
  • You can connect onto your low pressure port to add a little clearance for your hose! Many uses
  • Perfect little step off your first stage for clearance issues!
  • We use a viton o-ring on both ends of this adapter!
  • This is made from solid brass and than electro-plated to give you a good looking adapter and very durable!
    •  
    Adapter 9/16-18 male to 9/16-18 male - Product Image
     Piranha's Price: $8.99

    Adapter 9/16-18 male to 9/16-18 male

  • 9/16-18 male "BOTH ENDS" screws into your low pressure hose to connect 2 hoses together!
  • Need to connect 2 low pressure hoses here is your connector!
  • Perfect little step off your first stage for clearance issues or other low pressure applications
  • We use a viton o-ring on both ends of this adapter!
  • This is made from solid brass and than electro-plated to give you a good looking adapter and very durable!
    •  
    9/16-18 Regulator Cap with O-ring - Product Image
     Piranha's Price: $9.99

    9/16-18 Regulator Cap with O-ring

    Back in Stock!

  • We have just added this new item
  • It is a 9/16-18 thread Cap to protect your regulator from damage to the threads or just to seal the ends and prevent water from entering!
  • We also include a #12 o-ring that you can set inside to make a better waterproof seal to protect your regulator 2nd stage
  • We have also included a hole on the top end so you can attach either bungee, line, split ring or clip to it
    •  
    3/8-24 First Stage Low Pressure Shut Off "Long Model" - Product Image
     Piranha's Price: $15.99

    3/8-24 First Stage Low Pressure Shut Off "Long Model"

  • Install between first stage low pressure port and standard regulator hose
  • This is the smaller / short shut off model! Looking for the longer version look on our website for it!
  • Slide machined Delrin collar to shut off gas flow
  • Commonly used with rebreather systems
  • Prevent critical gas loss
  • 3/8"-24 UNF male inlet to 3/8"-24 UNF female outlet threads
    •  
    3/8-24 First Stage Low Pressure Shut Off "Short Model" - Product Image
     Piranha's Price: $17.99

    3/8-24 First Stage Low Pressure Shut Off "Short Model"

  • Install between first stage low pressure port and standard regulator hose
  • This is the smaller / short shut off model! Looking for the longer version look on our website for it!
  • Slide machined Delrin collar to shut off gas flow
  • Commonly used with rebreather systems
  • Prevent critical gas loss
  • 3/8"-24 UNF male inlet to 3/8"-24 UNF female outlet threads
    •  
    Omni Swivel BC Standard Quick Disconnect Male Fitting: Check Valve 9/16"-18m - Product Image
     Piranha's Price: $59.99

    Omni Swivel BC Standard Quick Disconnect Male Fitting: Check Valve 9/16"-18m

    Male QD:

    • Inflator hose quick disconnect type male
    • 9/16"-18 male with 1lb built in check valve. Connects to any low pressure port or hose.

    Details:

    • Male QD contains 1lb check valve allowing disconnection and
      attachment underwater, while keeping water from flooding the system.
    • Solid Brass Construction
    • Made with 02 compatible material
     

    Rebreather Valves and Shut Offs

    Valves and shut offs for closed circuit diluent and oxygen cylinders.

    In this category: Rebreather Valve BLACK Handwheel, Rebreather Valve GREEN Handwheel, Omni Swivel BC Standard Quick Disconnect Male Fitting: Check Valve 9/16 -18m, Adapter 9/16-18 male to 9/16-18 male, Adapter 3/8-24 male to 9/16-18 male, 9/16-18 Regulator Cap with O-ring.

    Related Categories

    Cart 7 Shopping Cart