We now found one of the smallest double ender made in 316 stainless steel!
Wanting a smaller double ender? Well you may want to check this little guy out
3" Inches / 76mm long make this our shortest 316 stainless steel double ender anyone carries!
5/16 Gate opening
3/8" Eye pocket
We do recommend that when diving with this little guy you are either bare handed or a 2mm or less snap. It is just easy to work with when going either way
Works with our 5mm or 6mm d-rings or other hardware
Still uses a stainless steel spring to allow this double ender to last longer and is built for marine fresh or salt water use
Our 3/4" inch Stainless Steel swivel bolt snap with our durabile high impact iridescent outer coating to add more color to your diving adventures
All stainless under our iridescent coating with a stainless spring to give you the high quality product for diving!
Our coating is very durable and under the coating we use a 316 stainless steel swivel bolt snap. These are coated then assemblied allowing the slide to move smoothly opening and closing
High quality 316 Stainless Steel material with a very durable high impact coating on the outside!
1/2" inch Gate opening
Overall length is 3 5/8" inches
Eye is 3/4" inches
Great for use in either salt or fresh water! This is a must use for tec divers
Stainless Steel spring for a long life of use
Stand out from the rest of the crowd and always be able to spot you or your dive buddies gear from all the standard black on boat or dive sites!
Our 3/4" inch Stainless Steel swivel bolt snap with our durabile high impact iridescent outer coating to add more color to your diving adventures
All stainless under our ireidescent coating with a stainless spring to give you the high quality product for diving!
Our coating is very durable and under the coating we use a 316 stainless steel swivel bolt snap. These are coated then assemblied allowing the slide to move smoothly opening and closing
High quality 316 Stainless Steel material with a very durable high impact coating on the outside!
1/2" inch Gate opening
Overall length is 3 5/8" inches
Eye is 3/4" inches
Great for use in either salt or fresh water! This is a must use for tec divers
Stainless Steel spring for a long life of use
Stand out from the rest of the crowd and always be able to spot you or your dive buddies gear from all the standard black on boat or dive sites!
Our 3 1/2" Stainless Steel outer coated Double Ender with a Special chemical outer rainbow iridescent color coating makes this double ender very durabile with high impact coating to reduce damage and add more color to your diving adventures
Never lose another double ender when you have these since nobody has these special colored double enders.
Our iridescent rainbow color coating is very durable and under this coating we use a 316 stainless steel double ender so you know it will outlast standard double enders. These are coated then assemblied allowing the slide to move smoothly opening and closing
Length is from end to end!
High quality 316 Stainless Steel material with a very durable high impact coating on the outside!
1/2" inch Gate opening
Great for use in either salt or fresh water! This is a must use for tec divers
Our 3 1/2" Stainless Steel outer coated Double Ender with a Special chemical outer rainbow iridescent color coating makes this double ender very durabile with high impact coating to reduce damage and add more color to your diving adventures
Never lose another double ender when you have these since nobody has these special colored double enders.
Our iridescent rainbow color coating is very durable and under this coating we use a 316 stainless steel double ender so you know it will outlast standard double enders. These are coated then assemblied allowing the slide to move smoothly opening and closing
Length is from end to end!
High quality 316 Stainless Steel material with a very durable high impact coating on the outside!
1/2" inch Gate opening
Great for use in either salt or fresh water! This is a must use for tec divers
Our 3/4" inch / 95mm Stainless Steel outer coated Butterfly snap with a Special chemical outer rainbow iridescent color coating makes this double ender very durabile with high impact coating to reduce damage and add more color to your diving adventures
Never lose another double ender when you have these since nobody has these special colored double enders.
Our iridescent rainbow color coating is very durable and under this coating we use a 316 stainless steel butterfly snap so you know it will outlast standard most butterfly snaps on the market today. These are coated then assemblied allowing the slide to move smoothly opening and closing
High qulaity Stainless spring makes this snap made for the marine diving conditions divers face everyday
Our 1 1/4" inch Stainless Steel outer coated Butterfly snap with a Special chemical outer rainbow iridescent color coating makes this double ender very durabile with high impact coating to reduce damage and add more color to your diving adventures
Also you now have a larger eye loop to work with
Never lose another double ender when you have these since nobody has these special colored double enders.
Our iridescent rainbow color coating is very durable and under this coating we use a 316 stainless steel butterfly snap so you know it will outlast standard most butterfly snaps on the market today. These are coated then assemblied allowing the slide to move smoothly opening and closing
High qulaity Stainless spring makes this snap made for the marine diving conditions divers face everyday
Our 4" Stainless Steel outer coated Double Ender with a Special chemical outer BLUE iridescent color coating makes this double ender very durabile with high impact coating to reduce damage and add more color to your diving adventures
Never lose another double ender when you have these since nobody has these special colored double enders.
Our iridescent BLUE color coating is very durable and under this coating we use a 316 stainless steel double ender so you know it will outlast standard double enders. These are coated then assemblied allowing the slide to move smoothly opening and closing
Length is from end to end!
High quality 316 Stainless Steel material with a very durable high impact coating on the outside!
1/2" inch Gate opening
Great for use in either salt or fresh water! This is a must use for tec divers
Our 4" Stainless Steel outer coated Double Ender with a Special chemical outer rainbow iridescent color coating makes this double ender very durabile with high impact coating to reduce damage and add more color to your diving adventures
Never lose another double ender when you have these since nobody has these special colored double enders.
Our iridescent rainbow color coating is very durable and under this coating we use a 316 stainless steel double ender so you know it will outlast standard double enders. These are coated then assemblied allowing the slide to move smoothly opening and closing
Length is from end to end!
High quality 316 Stainless Steel material with a very durable high impact coating on the outside!
1/2" inch Gate opening
Great for use in either salt or fresh water! This is a must use for tec divers
Ok so folks have been asking for these and we got in our first batch of them in!
They have a 90 degree flat lip so with or without a glove you can open like a breeze and reduces your chances of line entanglement using these!
1 1/2" inch Large Round Thin Ring. No wasted space. Now you can place a finger even with drysuit gloves on to make your diving even safer!! Don't worry the ring is thing but will hold up during harsh diving conditions
1/2" inch Gate opening gives you a large opening to clip onto with or release from
4 1/4" overall length
Small compact frame for durability with a LARGE Round Thin Ring makes diving with gloves a beeze now
Stainless steel with a stainless spring means long life with reduce chances of rust formations
Our newest item is our easy grip with our larger finger post to open the gate area of this swivel. Our larger finger post makes finding it in the dark, murky or wearing thicker gloves a breeze! We even have small grooves on the top side of this finger post to get even a better grip then ever before.
Our double ender with a special process to give it a hard and durabile outside coating
This double ender is made out of 316 stainless steel and then coated in our newest color Blue!
This double ender has a flat lip on the both sides of the contact slides!
Has large gate opening 9/16" inches
Easy to open with our easy grip lips with topside grooves giving you even more aid when opening the gate
Another great item for night diving, murky water conditions, cave or wreck divers or even rescue divers needing to quickly clip off!
As Piranha keeps designing new products to make your diving safer and at the same time more fun with colors we have just brought in our latest new cave item tactile line cookies with tactile edges so you can feel that it is your cookie even in a black out situation
Ready for the a wide selection of our latest Non-directionals in our newest design! Well we are moving forward with more to make your diving yours in the colors you want for your diving needs
We made these with the same line slots so no need to make any adjustments to laying these out
Our size on these are 3 1/4" inches Long x 2" inches Wide and the thickness is 1/8" thick
Our thickness gives you a very durable Non-directional that work stand up ith the harsh diving conditions of cave diving
We have a now a full line up of line arrows, cookies and rems / non-directionals to meet your diving needs
As Piranha keeps designing new products to make your diving safer and at the same time more fun with colors we have just brought in our latest new cave item tactile line cookies with tactile edges so you can feel that it is your cookie even in a black out situation
Ready for the a wide selection of our latest line cookies in our newest design! Well we are moving forward with more to make your diving yours in the colors you want for your diving needs
We made these with the same line slots so no need to make any adjustments to laying these out
Our size on these are 1 7/8" inches diameter and the thickness is 1/8" thick
Our thickness gives you a very durable line arrow that work stand up ith the harsh diving conditions of cave diving
We have a now a full line up of line arrows, cookies and rems / non-directionals to meet your diving needs
As Piranha keeps designing new products to make your diving safer and at the same time more fun with colors we have just brought in our latest new cave item tactile line cookies with tactile edges so you can feel that it is your cookie even in a black out situation
Ready for the largest selection of glow in the dark line cookies in our newest design! Well we are moving forward with more to make your diving yours in the colors you want for your diving needs
We made these with the same line slots so no need to make any adjustments to laying these out
Our size on these are 1 7/8" inches diameter and the thickness is 1/8" thick
Our thickness gives you a very durable line arrow that work stand up ith the harsh diving conditions of cave diving
We have a now a full line up of line arrows, cookies and rems / non-directionals to meet your diving needs
As Piranha keeps designing new products to make your diving safer and at the same time more fun with colors we have just brought in our latest line arrow with tactile edges so you can feel that it is your arrow even in a black out situation
Ready for the largest selection of glow in the dark line arrows in our newest design! Well we are moving forward with more to make your diving yours in the colors you want for your diving needs
We made these with the same line slots so no need to make any adjustments to laying these out
Our size on these are 3" inches long x 1 7/8" wide along the bottom edge x 1/8" thick
Our thickness gives you a very durable line arrow that work stand up ith the harsh diving conditions of cave diving
We have a now a full line up of line arrows, cookies and rems / non-directionals to meet your diving needs
As Piranha keeps designing new products to make your diving safer and at the same time more fun with colors we have just brought in our latest line arrow with tactile edges so you can feel that it is your arrow even in a black out situation
We made these with the same line slots so no need to make any adjustments to laying these out
Our size on these are 3" inches long x 1 7/8" wide along the bottom edge x 1/8" thick
Our thickness gives you a very durable line arrow that work stand up ith the harsh diving conditions of cave diving
We have a few colors with more coming in both glow in the dark and reflective versions. Also line cookies and Rems following as we are working on their final sizing and design
As Piranha keeps designing new products to make your diving safer and at the same time more fun with colors we have just brought in our latest line arrow with tactile edges so you can feel that it is your arrow even in a black out situation and now in a highly reflective design!
These are highly reflective when your dive light hits these arrows
We made these with the same line slots so no need to make any adjustments to laying these out
Our size on these are 3" inches long x 1 7/8" wide along the bottom edge x 1/8" thick
Our thickness gives you a very durable line arrow that work stand up ith the harsh diving conditions of cave diving
We now have a high quality Bright PINK 30lb lift donut style wing for those looking for a quality wing at a Piranha Price and do not let the price fool you this wing it comes with a tough quality outer shell with all the high end features you want from a wing!
Your donut wing comes with following:
30lb lift Donut type wing with 4 tank cam band slots in the wing for your tank bands for use without a single tank adapter if you choose or we have dual height grommets so you can fine tune your balance in the water or you can use those holes with a single tank adapter and lastly for tank bands for doubles!
Both the grommet holes and the slots allow you to fine tune your balance by moving your wing height. The grommet holes are 11" inches on center so any single tank adapter will fit your wing if you plan on using one!
The outer shell is made from a tough 1050 Cordura material
Want to get to the inside of your wing? No problem just use our zipper on the inside part on the front side of your wing to easily get inside to do a quick patch if needed or just to keep clean your wing!
K type oral inflator hose and inflator plus a low pressure rubber BC hose,
Need to get to the bladder? No problem we use a high quality zipper to open your outer shell to get to work on your bladder if needed!
Also at the top on the backside is a handle to lift your wing sewn into the donut material!
Specification:
Material: Inner Shell: 420D TPU Coated Cloth in Black Outer Shell: 1050D Cordura Connector: TPU Colorectal Tube: Rubber
Size Chart:
Donut: When not inflated 64cmx 43cm/////25.2inch x 16.93" inches
When inflating 64cm x 38cmx13.5cm/////25.2inch x 14.96
We now have a high quality Bright PINK 30lb lift donut style wing for those looking for a quality wing at a Piranha Price and do not let the price fool you this wing it comes with a tough quality outer shell with all the high end features you want from a wing!
Your donut wing comes with following:
30lb lift Donut type wing with 4 tank cam band slots in the wing for your tank bands for use without a single tank adapter if you choose or we have dual height grommets so you can fine tune your balance in the water or you can use those holes with a single tank adapter and lastly for tank bands for doubles!
Both the grommet holes and the slots allow you to fine tune your balance by moving your wing height. The grommet holes are 11" inches on center so any single tank adapter will fit your wing if you plan on using one!
The outer shell is made from a tough 1050 Cordura material
Want to get to the inside of your wing? No problem just use our zipper on the inside part on the front side of your wing to easily get inside to do a quick patch if needed or just to keep clean your wing!
K type oral inflator hose and inflator plus a low pressure rubber BC hose,
Need to get to the bladder? No problem we use a high quality zipper to open your outer shell to get to work on your bladder if needed!
Also at the top on the backside is a handle to lift your wing sewn into the donut material!
Specification:
Material: Inner Shell: 420D TPU Coated Cloth in Black Outer Shell: 1050D Cordura Connector: TPU Colorectal Tube: Rubber
Size Chart:
Donut: When not inflated 64cmx 43cm/////25.2inch x 16.93" inches
When inflating 64cm x 38cmx13.5cm/////25.2inch x 14.96
We now have a high quality Neon Green 30lb lift donut style wing for those looking for a quality wing at a Piranha Price and do not let the price fool you this wing it comes with a tough quality outer shell with all the high end features you want from a wing!
Your donut wing comes with following:
30lb lift Donut type wing with 4 tank cam band slots in the wing for your tank bands for use without a single tank adapter if you choose or we have dual height grommets so you can fine tune your balance in the water or you can use those holes with a single tank adapter and lastly for tank bands for doubles!
Both the grommet holes and the slots allow you to fine tune your balance by moving your wing height. The grommet holes are 11" inches on center so any single tank adapter will fit your wing if you plan on using one!
The outer shell is made from a tough 1050 Cordura material
Want to get to the inside of your wing? No problem just use our zipper on the inside part on the front side of your wing to easily get inside to do a quick patch if needed or just to keep clean your wing!
K type oral inflator hose and inflator plus a low pressure rubber BC hose,
Need to get to the bladder? No problem we use a high quality zipper to open your outer shell to get to work on your bladder if needed!
Also at the top on the backside is a handle to lift your wing sewn into the donut material!
Specification:
Material: Inner Shell: 420D TPU Coated Cloth in Black Outer Shell: 1050D Cordura Connector: TPU Colorectal Tube: Rubber
Size Chart:
Donut: When not inflated 64cmx 43cm/////25.2inch x 16.93" inches
When inflating 64cm x 38cmx13.5cm/////25.2inch x 14.96
So we have this new light that has upto 1800 lumens at full power with a zoomable lighthead. This light comes with many features but now with it having the zoomable beam well at this price it is hard to beat
This light has 3 modes: Full, Mid and SoS
Also the light ring around the light on/off switch lights up to let you know what is left for battery power. Full power lights up as green
Beam Angle: 11 to 73 degrees adjustable
Has a durable aluminum body with a hard anodize costing to hold up with harsh diving use
Waterproof to 330ft / 100 meters
Battery is a 18650 3400 mAh
Run Times:
High: 1800 lumens 2 1/2 hours
Mid 900: lumens 3 1/2 hours
SoS: 3 1/2 hours
Charging this light is easy. You can either remove the rear end cap and use a usb port to charge or unscrew that rear charging port to get to the battery and charge the battery in a standard battery charger "Not Included"
Comes complete with a user manual, USB charging cable, 2X spare o-rings, o-ring grease tube, Lanyard and Nylon light bag
So we have this new light that has upto 1800 lumens at full power with a zoomable lighthead. This light comes with many features but now with it having the zoomable beam well at this price it is hard to beat
This light has 3 modes: Full, Mid and SoS
Also the light ring around the light on/off switch lights up to let you know what is left for battery power. Full power lights up as green
Beam Angle: 11 to 73 degrees adjustable
Has a durable aluminum body with a hard anodize costing to hold up with harsh diving use
Waterproof to 330ft / 100 meters
Battery is a 18650 3400 mAh
Run Times:
High: 1800 lumens 2 1/2 hours
Mid 900: lumens 3 1/2 hours
SoS: 3 1/2 hours
Charging this light is easy. You can either remove the rear end cap and use a usb port to charge or unscrew that rear charging port to get to the battery and charge the battery in a standard battery charger "Not Included"
Comes complete with a user manual, USB charging cable, 2X spare o-rings, o-ring grease tube, Lanyard and Nylon light bag
We have added another new harness clip to be used with 2" inch webbing
Just like our other slip-on hardware this allows you to slid it on without removing your harness
This is not for use with heavy items without fully testing it out. For the most part our testing as figured this as a chest mounted clip for lights and other items
This is made out of our marine grade 304 stainless which holds up with no rusting
You can get this in a flat model or select a slightly angle model to clip off to
Fits any 2" inch webbing and uses gripper teeth to hold your webbing in place during use
Dimensions:
Overall Length 2 5/8" inches
Overall width 2 3/8" inches
Clip length: 1 1/8"
Clip width ID: 1" inch
These are tumbled for 48 hours removing and sharp edges
So if you are looking for deluxe ITP digital read-out display gauge well we have them now
Still you can connect with a standard BC tip connection High precision, digital display to decimal point Relief valve 180-200PSI,with bleed valve
Digital pressure gauge technical Specifications - Measuring Range: -0.1 to 30 MPa (selectable within this range) - Media Temperature: 0-80?C o Accuracy: +-1.0% / +-0.4% / +-0.2% (customizable) - Operating Temperature: -10 to 60?C o Display: 5-digit dynamic pressure display - Operating Humidity: <=80% RH o Overload Limit: Do not exceed the maximum rated pressure -Thread Type: 1/4 NPT
o Power Supply: Battery powered... Replacable - Pressure Type: Gauge pressure - Media Compatibility: Suitable for gas (Air, Oxygen, Helium), water, and other media compatible with stainless steel - Response Time: <=50 ms
This gauge also comes with a operating instruction sheet
User replacable battery from the backside of this unit
So Piranha added to our line up of products more color and with this a slightly thicker bungee who prefer it! With Piranha you now can get your 3/16" Black bungee and now select your bungee holder color and your final length of where you wish it to sit on your chest area!
We first start with a long piece of bungee in fact it is 3 feet in length Why you ask so you can make it a long or short necklace and our neck sizes vary so to make sure your covered we added it slightly longer for you!. You can then adjust your necklace from the one end we left undone to get your final adjustment right for you! When you get your size just cut the bungee and tie an overhand knot to slip up to your color holder and your done. No more getting them to short or way to long adjust to your size easy we done most of the work for you now complete your necklace
So you can select from our drop down box on the color you want to make your necklace holders! With Piranha you now can have a splash of color on many items making your diving fun but also expressing you!
We leave one end of our bungee necklace without a overhand knot. So below we give you some helpful hints on the best way to get your new necklace just right.
*Remember we leave one end untied so you can get your final sizing to fit you
* When your wearing your diving suit being a wetsuit or drysuit you want to have it on so you can your hang length correct. You also can do this without donning your suit just know it will slightly chage your hang location
* With the regulator slipped into the 1/8" bungee slot to hold it tightly you can now go to the next step
* With your suit on if you want and the regulator in place pull the unknotted end to adjust your length to where you want it to sit for you. You can also guess at the length based on the type of suit you use knowing where it will drop to
* Once you got that remove the necklace and slightly pull the bungee out from the holder like a 1/4" inch then tie an overhand knot and trim the bungee
* Heat the end with a lighter or anything to just seal the bungee cord from running on you near your knot
* Next slide your mouthpiece back into the bungee where your knot will now sit slighty in your color bungee holder. Maybe 1/3 in the holder just enough to be out of the way
So Piranha added to our line up of products more color! With Piranha you now can get your 1/8" Black bungee and now select your bungee holder color and your final length of where you wish it to sit on your chest area!
We first start with a long piece of bungee in fact it is 3 feet in length Why you ask so you can make it a long or short necklace and our neck sizes vary so to make sure your covered we added it slightly longer for you!. You can then adjust your necklace from the one end we left undone to get your final adjustment right for you! When you get your size just cut the bungee and tie an overhand knot to slip up to your color holder and your done. No more getting them to short or way to long adjust to your size easy we done most of the work for you now complete your necklace
So you can select from our drop down box on the color you want to make your necklace holders! With Piranha you now can have a splash of color on many items making your diving fun but also expressing you!
We leave one end of our bungee necklace without a overhand knot. So below we give you some helpful hints on the best way to get your new necklace just right.
*Remember we leave one end untied so you can get your final sizing to fit you
* When your wearing your diving suit being a wetsuit or drysuit you want to have it on so you can your hang length correct. You also can do this without donning your suit just know it will slightly chage your hang location
* With the regulator slipped into the 1/8" bungee slot to hold it tightly you can now go to the next step
* With your suit on if you want and the regulator in place pull the unknotted end to adjust your length to where you want it to sit for you. You can also guess at the length based on the type of suit you use knowing where it will drop to
* Once you got that remove the necklace and slightly pull the bungee out from the holder like a 1/4" inch then tie an overhand knot and trim the bungee
* Heat the end with a lighter or anything to just seal the bungee cord from running on you near your knot
* Next slide your mouthpiece back into the bungee where your knot will now sit slighty in your color bungee holder. Maybe 1/3 in the holder just enough to be out of the way
So now add a little more color to your diving rig. We all love black but just some color tells everyone that is your diving rig when diving in large groups
Fits most BC or Drysuit knurled connector end hoses!
Easy installation that remains secured during your toughest diving condictions
Easy to connect or disconnect during your dive with thick gloves
Must have item for every drysuit diver
Now we have these in a good selection of colors! Choose from our drop down box below to select your color
So we now have 5/16" inch backplate speed nuts in wide array of colors! We even have glow in the dark plus our nestest color we call Silk. It is a blue, green and orange mis of colors nut which in person is awesome looking
You get 2 of the color you select plus we include a washer and lock nut for each speed nut in your order
Just select the color from our drop down box velow
Our nuts are 3/16" stainless with the rest of our hardware
The ridges allow you to better grip the speednut when tighting down on to your backplate
So we now have 3/8" inch backplate speed nuts in wide array of colors! We even have glow in the dark plus our nestest color we call Silk. It is a blue, green and orange mis of colors nut which in person is awesome looking
You get 2 of the color you select plus we include a washer and lock nut for each speed nut in your order
Just select the color from our drop down box velow
Our nuts are 3/8" stainless with the rest of our hardware
The ridges allow you to better grip the speednut when tighting down on to your backplate
With the wide range of retainer bands that we carry we thought these would fit in nicely since these being made of a food grade silicone allows these to stretch to fit your cylinders and hold your hoses with no issues.
Piranha keeps on bringing in more color for you to dress your harness up and complete your diving rig in not just style but making your diving more enjoyable..
Being made from food grade silicone also ensures durability over the long haul with less retainer issues. So if your diving in cold to hot water these bands will keep on working
This size fit cylinders ranging from 4" inch in diameter to 5.5" inches
With the pull tab on these bands it makes setting your hoses up and if you need to slip them back in not an issue
Wearing gloves? Well with these bands it is easy to use the pull tab to get to your hoses.
With the wide range of retainer bands that we carry we thought these would fit in nicely since these being made of a food grade silicone allows these to stretch to fit your cylinders and hold your hoses with no issues.
Piranha keeps on bringing in more color for you to dress your harness up and complete your diving rig in not just style but making your diving more enjoyable..
Being made from food grade silicone also ensures durability over the long haul with less retainer issues. So if your diving in cold to hot water these bands will keep on working
This size fit cylinders ranging from 6.9" inch in diameter to 8" inches
With the pull tab on these bands it makes setting your hoses up and if you need to slip them back in not an issue
Wearing gloves? Well with these bands it is easy to use the pull tab to get to your hoses.
So you need to carry different items and need a place to store them during your dive? We got it for you with our newer slightly upgraded design
This newer pocket has pockets one with a heavy outer mesh material with a velcro closure on the one side. It also has a tab to pull it open when you need it to store smaller or flatter items.
Now the other side has a small tighter mesh materal on the outside with a heavy duty zipper to open the pocket. Inside the pocket you have 2 small velcro close pockets towards the outside while a bungee leash to secure what ever you need to. The zipper has a easy to grab pull tab so not working hard to slide it open. Now the fun stuff! You have a zipper in the middle with a pull tabd pull this baby open and it expands your pocket to hold larger items! Yup keep it small but if you need more space rotate the middle zipper and get more room!!
The zippers have pull tabs so even with gloves you can open with ease!
The middle zipper allows you to open the one pocket even wider if you need too and expands it open by over 3" inches wide!
The larger rear pocket is roughly 11" inches long X 7 1/2" tall and can be open to over 3 1/4" inches wide!
The back has 2 4" inch stainless steel double enders to connect your pocket to you or just use the 1" inch stainless steel d-rings and connect by your method.
You also have a velcro closure on the backside that holds your double enders when not in use or during a dive you can also store smaller items in there
The Material is made from a heavy duty: 1680 nylon with PU coating giving you one tough pocket that will last you during even your harsh dives
Also has a drain on the bottom side to remove water quickly when coming out of the water when expanded.
This new D-Ring we now have added a 3rd option for clipping to/from! We added a low profile D-ring at the bottom to allow for even more flexibility to your rig!!
You can use this has a triple under the counterlung d-ring or slide it on your 2 inch crotch strap towards the rear and now you have a place to attach spools, reels or even Smb / liftbags and even more with the 3rd low profile rear D-ring!!!
Fits 2 inch webbing... measures loop 2 inch "ID" w/ 1.5 inch long "ID"
You can use this has a double under the counterlung d-ring or slide it on your 2 inch crotch strap towards the rear and now you have a place to attach spools, reels or even Smb / liftbags!
Fits 2 inch webbing... measures loop 2 inch "ID" w/ 1.5 inch long "ID"
Another cool octo holder you may just want to try out!
The Clip with Silicone Ring is one octo holder that is simple in design but works so well
The simple design, the little space, the reliability of the materials, make it the perfect octopus holder for your regulator. The stainless steel gate is also matched with a stanless spring for durablity when your doing the dirty water dives or salt water
Just insert the mouthpiece of the dispenser into the silicone ring to secure it in the right place and with the guarantee of finding it quickly in case of need.
The silicone with which the ring is made is a special compound that resists the action of salt and sun and flexes easily
Octopus holder: ideal for attaching the second regulator to the equipment.
Silicone ring special compound 25 mm / 1" inch black or Yellow webbing
Another cool octo holder you may just want to try out!
Back in Stock!
The Clip with Silicone Ring is one octo holder that is simple in design but works so well
The simple design, the little space, the reliability of the materials, make it the perfect octopus holder for your regulator. The stainless steel gate is also matched with a stanless spring for durablity when your doing the dirty water dives or salt water
Just insert the mouthpiece of the dispenser into the silicone ring to secure it in the right place and with the guarantee of finding it quickly in case of need.
The silicone with which the ring is made is a special compound that resists the action of salt and sun and flexes easily
Octopus holder: ideal for attaching the second regulator to the equipment.
Silicone ring special compound 25 mm / 1" inch black or Yellow webbing
Another cool octo holder you may just want to try out!
Back in Stock!
The Clip with Silicone Ring is one octo holder that is simple in design but works so well
The simple design, the little space, the reliability of the materials, make it the perfect octopus holder for your regulator. The stainless steel gate is also matched with a stanless spring for durablity when your doing the dirty water dives or salt water
Just insert the mouthpiece of the dispenser into the silicone ring to secure it in the right place and with the guarantee of finding it quickly in case of need.
The silicone with which the ring is made is a special compound that resists the action of salt and sun and flexes easily
Octopus holder: ideal for attaching the second regulator to the equipment.
Silicone ring special compound 25 mm / 1" inch black or Yellow webbing
Another cool octo holder you may just want to try out!
Back in Stock!
The Clip with Silicone Ring is one octo holder that is simple in design but works so well
The simple design, the little space, the reliability of the materials, make it the perfect octopus holder for your regulator. The stainless steel gate is also matched with a stanless spring for durablity when your doing the dirty water dives or salt water
Just insert the mouthpiece of the dispenser into the silicone ring to secure it in the right place and with the guarantee of finding it quickly in case of need.
The silicone with which the ring is made is a special compound that resists the action of salt and sun and flexes easily
Octopus holder: ideal for attaching the second regulator to the equipment.
Silicone ring special compound 25 mm / 1" inch black or Yellow webbing
Another cool octo holder you may just want to try out!
Back in Stock!
The Clip with Silicone Ring is one octo holder that is simple in design but works so well
The simple design, the little space, the reliability of the materials, make it the perfect octopus holder for your regulator. The stainless steel gate is also matched with a stanless spring for durablity when your doing the dirty water dives or salt water
Just insert the mouthpiece of the dispenser into the silicone ring to secure it in the right place and with the guarantee of finding it quickly in case of need.
The silicone with which the ring is made is a special compound that resists the action of salt and sun and flexes easily
Octopus holder: ideal for attaching the second regulator to the equipment.
Silicone ring special compound 25 mm / 1" inch black or Yellow webbing
Another cool octo holder you may just want to try out!
Back in Stock!
The Clip with Silicone Ring is one octo holder that is simple in design but works so well
The simple design, the little space, the reliability of the materials, make it the perfect octopus holder for your regulator. The stainless steel gate is also matched with a stanless spring for durablity when your doing the dirty water dives or salt water
Just insert the mouthpiece of the dispenser into the silicone ring to secure it in the right place and with the guarantee of finding it quickly in case of need.
The silicone with which the ring is made is a special compound that resists the action of salt and sun and flexes easily
Octopus holder: ideal for attaching the second regulator to the equipment.
Silicone ring special compound 25 mm / 1" inch black or Yellow webbing
Another cool octo holder you may just want to try out!
Back in Stock!
The Clip with Silicone Ring is one octo holder that is simple in design but works so well
The simple design, the little space, the reliability of the materials, make it the perfect octopus holder for your regulator. The stainless steel gate is also matched with a stanless spring for durablity when your doing the dirty water dives or salt water
Just insert the mouthpiece of the dispenser into the silicone ring to secure it in the right place and with the guarantee of finding it quickly in case of need.
The silicone with which the ring is made is a special compound that resists the action of salt and sun and flexes easily
Octopus holder: ideal for attaching the second regulator to the equipment.
Silicone ring special compound 25 mm / 1" inch black or Yellow webbing
Another cool octo holder you may just want to try out!
Back in Stock!
The Clip with Silicone Ring is one octo holder that is simple in design but works so well
The simple design, the little space, the reliability of the materials, make it the perfect octopus holder for your regulator. The stainless steel gate is also matched with a stanless spring for durablity when your doing the dirty water dives or salt water
Just insert the mouthpiece of the dispenser into the silicone ring to secure it in the right place and with the guarantee of finding it quickly in case of need.
The silicone with which the ring is made is a special compound that resists the action of salt and sun and flexes easily
Octopus holder: ideal for attaching the second regulator to the equipment.
Silicone ring special compound 25 mm / 1" inch black or Yellow webbing
We are calling these oyster Boxes that will protect your gear from damage during transist or on a dive boat!
These padded cases are thermoformed and thus making them shockproof from the stiffness they give your computers, watches, gauges, lights and other equipment
These are also lightweight! Perfect if your traveling and need to protect your big $$ dive gear
The oval design allows you to place items inside with its thermoformed walls
Our Newest smaller Non-LOCKING retractor version of the famous standard retractor with the steel cable line takes up minimal space, despite the cable extension up to 24"+ Inches / 61 cm. The main body has a smaller profile for those who want to take up less space on your dive rig
We have a split ring on the one end where the dynema line is affix too and the main body has a 360 swiveling snap with a stainless steel slip gate to attached to your rig
This Retractor are equipped with a DYNEMA cable which provides better strtength and durablilty
DYNEMA line has exceptional resistance, comparable to that of steel cables, but with the advantage of resisting torsion and bending efforts very well. DYNEMA lines are also lighter than steel giving you a higher quality retractor then ever before
Cable: DYNEMA line size: Ø 1 mm Body: Nylon Spring: stainless steel Carabiner: Nylon stainless steel stop
Our Newest LOCKING retractor version of the famous standard retractor with the Dynema ultra strong cord takes up minimal space, despite the cable extension up to 35+ Inches / 90 cm.
The peculiarity of this model is that it can lock the cable at the desired extension: just press the side button to lock the sliding of the dynema line
We have a split ring on the one end where the dynema line is affix too and the main body has a 360 swiveling snap with a stainless steel slip gate to attached to your rig
This Retractor are equipped with a DYNEMA cable which provides better strtength and durablilty
DYNEMA line has exceptional resistance, comparable to that of steel cables, but with the advantage of resisting torsion and bending efforts very well. DYNEMA lines are also lighter than steel giving you a higher quality retractor then ever before
Cable: DYNEMA line size: O 1 mm Body: Nylon Spring: stainless steel Carabiner: Nylon stainless steel stop
We now are offering one of the highest quality #18 dive line on the market!
With our high viz safety orange with a blue tracer this line is easy to follow while underwater!
Looking for the best quality dive line than check out our professional grade line and see the difference
Our line is negatively buoyant
Our line is made with a tighter wound in a diamond braid that is made without a core design construction for better overall abrasion resistance and minimal stretch.
Our line is made with colored Polyester that does not bleed out like the cheaper lines. Our Dacron line is made out of Polyester material which results in the best dive line you can use!
This is a #18 line which is common for most diving applications
Need or want a extremely high viz underwater line? This is the line you have been waiting for
Unlike most other dive lines on the market our professional quality line has very little stretch
The process also allows our line to have a tighter wound which creates a more abrasion resistance dive line
The manufacturing process builds our line to reduce the twist and kinking like lesser quality dive lines
Selecting a color line? Not a problem our line does not bleed out like other dive lines making our professional dive line retain its color much longer
We package our professional line on 1lb spools which hold roughly 900+ plus footage. These are small spools which hold the line not tubes which allow line to roll off...
We also have one more process done to our dive line that makes it totally round and hard, but still remains very flexible for use. This is a heating process takes the torque out of the line, and totally reduces any preshrinking of the line. This heating process also reduces the stretch out of this line thus making an excellent dive line. We do not know of another company that uses these steps to build there dive line. We work directly with our manufacturer to get the best line for you
We now are offering one of the highest quality #18 dive line on the market!
With our high viz safety orange with a neon yellow tracer this line is easy to follow while underwater!
Looking for the best quality dive line than check out our professional grade line and see the difference
Our line is negatively buoyant
Our line is made with a tighter wound in a diamond braid that is made without a core design construction for better overall abrasion resistance and minimal stretch.
Our line is made with colored Polyester that does not bleed out like the cheaper lines. Our Dacron line is made out of Polyester material which results in the best dive line you can use!
This is a #18 line which is common for most diving applications
Need or want a extremely high viz underwater line? This is the line you have been waiting for
Unlike most other dive lines on the market our professional quality line has very little stretch
The process also allows our line to have a tighter wound which creates a more abrasion resistance dive line
The manufacturing process builds our line to reduce the twist and kinking like lesser quality dive lines
Selecting a color line? Not a problem our line does not bleed out like other dive lines making our professional dive line retain its color much longer
We package our professional line on 1lb spools which hold roughly 900+ plus footage. These are small spools which hold the line not tubes which allow line to roll off...
We also have one more process done to our dive line that makes it totally round and hard, but still remains very flexible for use. This is a heating process takes the torque out of the line, and totally reduces any preshrinking of the line. This heating process also reduces the stretch out of this line thus making an excellent dive line. We do not know of another company that uses these steps to build there dive line. We work directly with our manufacturer to get the best line for you
So we brought these in since they have all the features of most surfare makers buoys but this has a special low profile OPV. This uses a flat type of opv which allow you to roll your smb tighter. We worked with our folks to make an smb that will fit most divers with the features below
The flapper valve allow you to put air in your smb and holds it in until you release it
We also have leaded magnetic weights to help keep your bottom closed and keep your smb from laying flat at the surface
1" inch stainless steel connection right at the bottom to clip onto your smb
1" inch plastic d-ring at the top to connect your light or dive slate
Solas reflective tape goes around the top
We also have both a velcro straps and bungee loop at the bottom to keep your smb rolled when not in use
Lastly with our plastic filler tip you can inflate by either a Bc hose or blowing into it and lastly stick the regulator in the bottom to inflate
420 Orange Denier material makes it a durable smb for use anywhere
So we brought these in since they have all the features of most surfare makers buoys but this has a special low profile OPV. This uses a flat type of opv which allow you to roll your smb tighter. We worked with our folks to make an smb that will fit most divers with the features below
The flapper valve allow you to put air in your smb and holds it in until you release it
We also have leaded magnetic weights to help keep your bottom closed and keep your smb from laying flat at the surface
1" inch stainless steel connection right at the bottom to clip onto your smb
1" inch plastic d-ring at the top to connect your light or dive slate
Solas reflective tape goes around the top
We also have both a velcro straps and bungee loop at the bottom to keep your smb rolled when not in use
Lastly with our plastic filler tip you can inflate by either a Bc hose or blowing into it and lastly stick the regulator in the bottom to inflate
420 Pink Denier material makes it a durable smb for use anywhere
So we brought these in since they have all the features of most surfare makers buoys but this has a special low profile OPV. This uses a flat type of opv which allow you to roll your smb tighter. We worked with our folks to make an smb that will fit most divers with the features below
The flapper valve allow you to put air in your smb and holds it in until you release it
We also have leaded magnetic weights to help keep your bottom closed and keep your smb from laying flat at the surface
1" inch stainless steel connection right at the bottom to clip onto your smb
1" inch plastic d-ring at the top to connect your light or dive slate
Solas reflective tape goes around the top
We also have both a velcro straps and bungee loop at the bottom to keep your smb rolled when not in use
Lastly with our plastic filler tip you can inflate by either a Bc hose or blowing into it and lastly stick the regulator in the bottom to inflate
420 Pink Denier material makes it a durable smb for use anywhere
So we brought these in since they have all the features of most surfare makers buoys but this has a special low profile OPV. This uses a flat type of opv which allow you to roll your smb tighter. We worked with our folks to make an smb that will fit most divers with the features below
The flapper valve allow you to put air in your smb and holds it in until you release it
We also have leaded magnetic weights to help keep your bottom closed and keep your smb from laying flat at the surface
1" inch stainless steel connection right at the bottom to clip onto your smb
1" inch plastic d-ring at the top to connect your light or dive slate
Solas reflective tape goes around the top
We also have both a velcro straps and bungee loop at the bottom to keep your smb rolled when not in use
Lastly with our plastic filler tip you can inflate by either a Bc hose or blowing into it and lastly stick the regulator in the bottom to inflate
420 Orange Denier material makes it a durable smb for use anywhere
Our transfill whip has 300 bar DIN connectors on each end
Each Gauge is oil filled to ensure accuracy and durablility
Large gauge face makes reading easy and simple in either PSI or BAR!
Gauge has both PSI and BAR Scale in 100 PSI increments
Our high pressure hose is roughly 60" inches long
Bleed valve at the bottom of the SPG guage area allows you to maintain a high accuracy and better control when using
You can use our whip in multiple ways such as to equalize cylinders, transfill from "doubles banks" or filling smaller rebreather bottles
Note: This whip moves your gas slower than our standard whip so please keep this in mind when purchasing. Uses a smaller bore hose which allows gas to move from 1 cylinder to another just at a slower rate!
***NOTICE: Our whips are sent with the pressure gauge not conntacted to protect from damage during shipping! You just remove the one port plug and screw in the gauge.. DO NOT USE teflon tape or anything on the threads just screw it in!
Our transfill whip has 300 bar DIN connectors on each end so you can fill to any din system
Our Gauge is oil filled to ensure accuracy
Large 2" inch gauge face makes reading easy and simple in either PSI or BAR!
Gauge has both PSI and BAR Scale in 100 PSI increments
Our high pressure hose is roughly 60" inches long and is made out of a tough kevlar inner braided material with a poylmer outer shealth
Rotating bleed valve knod located just under the gauge allows you to maintain a high accuracy and better control when filling your cylinders
This is our larger bore transfill hose in diameter which will allow you to move your air / mix faster from one cylinder to another!
You can use our whip in multiple ways such as to equalize cylinders, transfill from "doubles banks" or filling smaller rebreather bottles
***NOTICE: Our whips are sent with the pressure gauge not conntacted to protect from damage during shipping! You just remove the one port plug and screw in the gauge.. DO NOT USE teflon tape or anything on the threads just screw it in!
Our flat lip easy grip swivel bolt snap is made slightly different from our slightly angled model. The lip comes out as a 90 degree lip from the snap instead of our slightly angled one which is roughly 20 degree with a downward slant. Still has all the great features for both models!!!
This double ender is made of 316 stainless steel
Has large gate opening 9/16" inches
Overall length 3 1/8" inch
3/4" inch eye loop ID measurement
This is our flat lip model! Still easy to operate and use in harsh diving conditions
Another great item for night diving, murky water conditions, cave or wreck divers or even rescue divers needing to quickly clip off!
Our flat lip easy grip swivel bolt snap is made slightly different from our slightly angled model. The lip comes out as a 90 degree lip from the snap instead of our slightly angled one which is roughly 20 degree with a downward slant. Still has all the great features for both models!!!
This double ender is made of 316 stainless steel
Has large gate opening 9/16" inches
1" inch eye loop ID measurement
3 7/8" end to end overall measurement roughly
This is our flat lip model! Still easy to operate and use in harsh diving conditions
Another great item for night diving, murky water conditions, cave or wreck divers or even rescue divers needing to quickly clip off!
Our flat lip easy grip swivel bolt snap is made slightly different from our slightly angled model. The lip comes out as a 90 degree lip from the snap instead of our slightly angled one which is roughly 20 degree with a downward slant. Still has all the great features for both models!!!
This double ender is made of 316 stainless steel
Has large gate opening 9/16" inches
Overall length 4 1/4" inch
Large 1 1/2" inch eye loop ID measurement
Eye loop is a 5mm thick loop
This is our flat lip model! Still easy to operate and use in harsh diving conditions
Another great item for night diving, murky water conditions, cave or wreck divers or even rescue divers needing to quickly clip off!
We just had these made for us and shipped in! We added this new size for you folks wanting a smaller size!!!
Our newest item is our easy grip with our larger finger post to open the gate area of this swivel. Our larger finger post makes finding it in the dark, murky or wearing thicker gloves a breeze! We even have small grooves on the top side of this finger post to get even a better grip then ever before.
Our newest size is just the right size when carrying finger spools or clipping off you now can select our smaller double ender!
This double ender is made of 316 stainless steel
This double ender has a flat lip on the both sides of the contact slides!
Has large gate opening 1/2" inches with an overall length of 3 1/2" inches long
Easy to open with our easy grip lips with topside grooves giving you even more aid when opening the gate
Another great item for night diving, murky water conditions, cave or wreck divers or even rescue divers needing to quickly clip off!
Our newest item is our easy grip with our larger finger post to open the gate area of this swivel. Our larger finger post makes finding it in the dark, murky or wearing thicker gloves a breeze! We even have small grooves on the top side of this finger post to get even a better grip then ever before.
This double ender is made of 316 stainless steel
This double ender has a flat lip on the both sides of the contact slides!
Has large gate opening 9/16" inches
Easy to open with our easy grip lips with topside grooves giving you even more aid when opening the gate
Another great item for night diving, murky water conditions, cave or wreck divers or even rescue divers needing to quickly clip off!
We now have a high quality Ocean Blue 30lb lift donut style wing for those looking for a quality wing at a Piranha Price and do not let the price fool you this wing it comes with a tough quality outer shell with all the high end features you want from a wing!
Your donut wing comes with following:
30lb lift Donut type wing with 4 tank cam band slots in the wing for your tank bands for use without a single tank adapter if you choose or we have dual height grommets so you can fine tune your balance in the water or you can use those holes with a single tank adapter and lastly for tank bands for doubles!
Both the grommet holes and the slots allow you to fine tune your balance by moving your wing height. The grommet holes are 11" inches on center so any single tank adapter will fit your wing if you plan on using one!
The outer shell is made from a tough 1050 Cordura material
Want to get to the inside of your wing? No problem just use our zipper on the inside part on the front side of your wing to easily get inside to do a quick patch if needed or just to keep clean your wing!
K type oral inflator hose and inflator plus a low pressure rubber BC hose,
Need to get to the bladder? No problem we use a high quality zipper to open your outer shell to get to work on your bladder if needed!
Also at the top on the backside is a handle to lift your wing sewn into the donut material!
Specification:
Material: Inner Shell: 420D TPU Coated Cloth in Black Outer Shell: 1050D Cordura Connector: TPU Colorectal Tube: Rubber
Size Chart:
Donut: When not inflated 64cmx 43cm/////25.2inch x 16.93" inches
When inflating 64cm x 38cmx13.5cm/////25.2inch x 14.96
These are brand new never used high pressure braided hoses we got a special deal on and we are passing the savings on to you.
Each hose comes in a sealed bag
These are limited qty's so if your looking you may want to et them before these are gone at this price!
Our Braided hoses are CE Tested and Approved!
Our hoses are made out layers of TPEE / Nylon Fiber material
Our new hoses are a double braided type high pressure hose
More than 30% lighter compared to standard hoses
Made with a kink free airflow design that does not allow our hose to be obstructed
Abrasion resistant material reduces nicks or cuts
Made with UV resistant safety braid which allows these hoses a longer life span than traditional hoses
Our Braided High Pressure hoses have a 7/16 fitting and will fit most of todays first stages
Working pressure of 5000 psi ensures against hose failures
Burst pressure rating of 22,000 psi gives you that extra safety margin
Smaller diameter hose at only 7/16 or 10.5mm
Great HP hose for your single pressure gauge or stage/pony gauge
Our hoses are tested and meet the SGS bursting standards and also comply with EN 250 Standard
Braid color is black only
This hose is made outside of the USA
BLACK ONLY!
Don't forget to check out our SPG's located in our gauge section! When purchasing both an hp hose and Spg you can save a few $$$ as a combonation purchase. We carry both 2 & 2.5 inch size Spg's with glass faces
NOTICE: Our braided hoses use a polyether-TPU and NOT the polyester-TPU that is causing internal issues with some hoses.
These are brand new never used high pressure braided hoses we got a special deal on and we are passing the savings on to you.
Each hose comes in a sealed bag
Our Braided hoses are CE Tested and Approved!
Our hoses are made out layers of TPEE / Nylon Fiber / Kevlar material
Our new hoses are a double braided type high pressure hose
More than 30% lighter compared to standard hoses
Made with a kink free airflow design that does not allow our hose to be obstructed
Abrasion resistant material reduces nicks or cuts
Made with UV resistant safety braid which allows these hoses a longer life span than traditional hoses
Our Braided High Pressure hoses have a 7/16 fitting and will fit most of todays first stages
Working pressure of 5000 psi ensures against hose failures
Burst pressure rating of 22,000 psi gives you that extra safety margin
Smaller diameter hose at only 7/16 or 10.5mm
Great HP hose for your single pressure gauge or stage/pony gauge
Our hoses are tested and meet the SGS bursting standards and also comply with EN 250 Standard
Braid color is black only
This hose is made outside of the USA
BLACK ONLY!
Don't forget to check out our SPG's located in our gauge section! When purchasing both an hp hose and Spg you can save a few $$$ as a combination purchase. We carry both 2 & 2.5 inch size Spg's with glass faces
NOTICE: Our braided hoses use a polyether-TPU and NOT the polyester-TPU that is causing internal issues with some hoses.
Piranha Dive is pround to get in one of the best valves for tec diving we have seen in a while!
These valves have two independently controlled DIN outlets.
These valves can be used with two 1st stage regulators as an H-valve. Left and Right model can be connected by special flexible crossbar for double tank manifolded configuration or just look at what you can do with these valves.
The biggest advantage of this system is that the double tanks can be disassembled without being emptied! No more losing your mis gas which is costly
The LOLA manifold system does not have any failure point found in other manifolds systems when using their isolator, since each valves side can be independently isolated it is the perfect fix for the tec diver.
These valves use a 3/4 NPS thread which fits all U.S. and Canada cylinders!
These valves can also be used on the following rebreathers today:
**Flex
**Hammerhead
**KISS
**COPIS CCRs with balanced and unbalanced regulators for larger depth range!
Choose either a left or right valve for your diving application.
**A righthand valve is determined when you face a valve a right hand valve will have the black handwheel on your LEFT
**A lefthand valve will have the black handwheel is on the righthand side when looking at the valve face on
A typical CCR oxygen tank on the right side of the unit uses LEFT valve.
Don't forget you can select rebuild kits, plugs for your valves at a special price while getting your valve plusyou can get the anti roll knob which is a must have for cave or wreck divers worry about your valve handwheel turning off during your dive!
These valves use a black handwheel
**NOTICE:: Lastly please take note that these valves use a plug in place of a burst disks! Dive shops will not fill these so if you want a dice shop to fill these please purchase one of our burst disks! The valve will come with the plug in the port which you can then add your burst disks to it at anytime!
Piranha Dive is pround to get in one of the best valves for tec diving we have seen in a while!
These valves have two independently controlled DIN outlets.
These valves can be used with two 1st stage regulators as an H-valve. Left and Right model can be connected by special flexible crossbar for double tank manifolded configuration or just look at what you can do with these valves.
The biggest advantage of this system is that the double tanks can be disassembled without being emptied! No more losing your mis gas which is costly
The LOLA manifold system does not have any failure point found in other manifolds systems when using their isolator, since each valves side can be independently isolated it is the perfect fix for the tec diver.
These valves use a 3/4 NPS thread which fits all U.S. and Canada cylinders!
These valves can also be used on the following rebreathers today:
**Flex
**Hammerhead
**KISS
**COPIS CCRs with balanced and unbalanced regulators for larger depth range!
Choose either a left or right valve for your diving application.
**A righthand valve is determined when you face a valve a right hand valve will have the black handwheel on your LEFT
**A lefthand valve will have the black handwheel is on the righthand side when looking at the valve face on
A typical CCR oxygen tank on the right side of the unit uses LEFT valve.
Don't forget you can select rebuild kits, plugs for your valves at a special price while getting your valve plusyou can get the anti roll knob which is a must have for cave or wreck divers worry about your valve handwheel turning off during your dive!
These valves use a black handwheel
**NOTICE:: Lastly please take note that these valves use a plug in place of a burst disks! Dive shops will not fill these so if you want a dice shop to fill these please purchase one of our burst disks! The valve will come with the plug in the port which you can then add your burst disks to it at anytime!
Stainless steel flexible design 90? for connection bottles 200 Bar.
The hose is designed primarily for air and nitrox.
When using TMX, there may be minimal leakage, which is manifested by the appearance of small bubbles on the surface of the hose, but this does not affect the performance of the product.
For long-term storage, we recommend closing both 2 valves on the instrument.
Stainless steel flexible connector hose for Lola 300 Bar Din valve. 300 bar
Length: 18in/46cm long
Use this cross over hose to connect backmouted bottles on a Flex CCR or any SCR in backmounted configuration
Stainless steel flexible design 90? for connection bottles 200 Bar.
The hose is designed primarily for air and nitrox.
When using TMX, there may be minimal leakage, which is manifested by the appearance of small bubbles on the surface of the hose, but this does not affect the performance of the product.
For long-term storage, we recommend closing both 2 valves on the instrument.
Stainless steel flexible connector hose for Lola 300 Bar Din valve. 300 bar
Length: 20in/51cm long
Use this cross over hose to connect backmouted bottles on a Flex CCR or any SCR in backmounted configuration
Stainless steel flexible design 90° for connection bottles 200 Bar.
The hose is designed primarily for air and nitrox.
When using TMX, there may be minimal leakage, which is manifested by the appearance of small bubbles on the surface of the hose, but this does not affect the performance of the product.
For long-term storage, we recommend closing both 2 valves on the instrument.
Stainless steel flexible connector hose for Lola 300 Bar Din valve. 300 bar
Length: 21 1/4" inches/54cm long
Use this cross over hose to connect backmouted bottles on a Flex CCR or any SCR in backmounted configuration
We now have a high quality first stage that is nitrox ready "Good for up to 40% right out of the box!" We recommend that you clean this first stage if you plan on using beyond 40% for safety
Our first stage has 1 7/16 high pressure port
It also has 4 3/8 low pressure ports to meet all your equipment add on needs
Intermediate Pressure 135-145 psi
This is a balance piston system
Need a drysuit inflation system add this first stage and build a less expensive system!
Use this first stage on your stage or pony bottles
And yes we have the rebuild kits for these jewels. These kits are also nitrox ready parts
High quality plastic screw to turn easy
This a 300 bar din fitting so it works on both a 300 or 200 bar valve!
You will not find a better valve for a quality first stage as this one!
This part is NITROX READY right out of the packaging!
Also note that when it comes time to rebuild this first stage we can also do that for you too if you need someone to do this
NOTE: When ordering a rebuild kit order the #AS-101-Kits kit!
We now have a high quality first stage that is nitrox ready "Good for up to 40% right out of the box!" We recommend that you clean this first stage if you plan on using beyond 40% for safety
Our first stage has 1 7/16 high pressure port
It also has 4 3/8 low pressure ports to meet all your equipment add on needs
Intermediate Pressure 135-145 psi
This is a balance piston system
Need a drysuit inflation system add this first stage and build a less expensive system!
Use this first stage on your stage or pony bottles
And yes we have the rebuild kits for these jewels. These kits are also nitrox ready parts
High quality plastic screw to turn easy
This a 300 bar din fitting so it works on both a 300 or 200 bar valve!
You will not find a better valve for a quality first stage as this one!
This part is NITROX READY right out of the packaging!
Also note that when it comes time to rebuild this first stage we can also do that for you too if you need someone to do this
NOTE: When ordering a rebuild kit order the #AS-101-Kits kit!
We use a rigid 2 inch 5mm stainless steel d-ring bent at a 45 degree angle
This d-ring is tig wielded to our 2 inch wide slide with NO TEETH but uses a heavy duty tri-glide of 3mm thick! This is one tough d-ring with an even tougher tri-glide
This angle allows you to clip off any item easy while diving
We also use a slightly wider slot opening if you need it: 1/4" Slot opening
Made from marine 316 grade stainless steel
Featured Items
What has just landed and what is on the way out, in one section.
In this category: Intro Items, Close-Outs, Trim Weight Pockets Quick Attach Type, Tear Drop Open D-Ring w/ Teeth, New! Convex Rearview Mirror w/ Bungee Mount Gen 2 Design, New! Storage Pocket, Katana Freediving Fin Free Domestic Ground Shipping, Weight Block BLACK w/ Black bungee Purchasing a PAIR.