Necessary tool when assembling Scubapro balanced piston regulators such as MK5, MK7, MK10 etc. Prevents knife edge of the piston from cutting or damaging crucial O-ring when piston is inserted
If you want unstable IP and or tiny bubbles then don't use it.....Or you can do it right the first time and be assured that the vital O-ring that seals the piston shaft is good as new.
Notice: Service equipment are not eligible for returns unless defective! We will gladly replace any defective piece...
Everything you need in one tool to completely disassemble and reassemble your tank valve! This multi-tool has a vinyl coated grip handle making working with this tool effortlessly.
We have only the serwood valve tool
This Tank Valve Multi Tool allows you to tighten loose valves handles. Loose Valve Handles are common a common problem for most divers at some point. Plus a variety of other valve tasks
This tool is a must for the Serious Diver, Dive Master or Professional who know dive gear and how to fix it.
Each tools includes the: Handwheel Nut Driver, Bonnet Nut Wrench, Safety Assembly Wrench, and Seat Plug Driver.
All 3 tools are made from chrome plated steel for durability
Notice: Service equipment are not eligible for returns unless defective! We will gladly replace any defective piece...
Here is a price for a universal adjuster you cannot pass up!
Our NEW deluxe 2nd stage regulator adjusting tool with gauge works with almost any regulator that uses either a Flat or Allen head design! "Except Hog and Deep 6 regulators allen head is not the same size!"
**If you want the allen head that fits the Hog and Deep 6 regulators this head goes from smaller to thicker which allows you to work with more regulator 2nd stages! This comes as a seperate piece and can be added or remove at any time!**
This is our newest 2nd stage adjuster and it is built to last!
This model uses a Flat Blade or a Allen head design to adjust your regulator and keeps it tuned up
Our deluxe model comes with a gauge that reads in both PSI and Bar! You simply move the gauge to the opposite end of the head you are using to adjust your regulator! Making that one tool you have to have!!!
This tool works on any regulator with our universal head except we notice the Hog regulators do not work with the allen head part of this tool
Fine tune your regulator or just check it before your next big dive as a safety check and performance
No more missing that dive because of an out of adjustment second stage
Please note that you must remove the gauge from the one side if it is the wrong adjust head side for your regulator! In most cases you can simply use your hand to remove and place on the other end!!
Only train personnel should rebuild or adjust second stages!
By purchasing and using this product you acknowledge that you have been train in using this type of tool and setting the proper settings for your second stage!
Notice: Service equipment are not eligible for returns unless defective! We will gladly replace any defective piece...
Our 2nd stage regulator adjusting tool with gauge works with most second stages on the market today!
This model uses a flat blade to adjust your regulator
Fine tune your regulator or just check it before your next big dive as a safety check
No more missing that dive because of an out of adjustment second stage
Only train personnel should rebuild or adjust second stages!
By purchasing and using this product you acknowledge that you have been train in using this type of tool and setting the proper settings for your second stage!
Notice: Service equipment are not eligible for returns unless defective! We will gladly replace any defective piece...
This Valve Flusher can be used on both Power inflators and Dry Suit Inflators
The DSS Valve Flusher allows the users to flush fresh water through either a BC power inflator or Drysuit inflator.
Removes salt and sand out of those critical valves and prevents them from sticking or failing!
Furnished complete with a Shut Off ball valve, the Valve Flusher connects to any standard Garden Hose (NH 3/4 x 11.5 thread)
To use simply push on to the Quick Disconnect Nipple of either inflator. With a build in retention ridge, the elastomeric Valve Flusher will stay attached at water pressures up to 100 PSI. Most domestic water supply pressures are 65 psi or less.
Makes gear cleaning just a little bit easier
Use this after every dive to prevent inflator problems during a dive
Notice: Service equipment are not eligible for returns unless defective! We will gladly replace any defective piece...
This is used to help adjust most second stage regulators
You must be trained and understand that use of this tool without proper training could result in injury or death! By purchasing this tool you acknowledge you have been trained and understand the proper use of this specific tool!
Notice: Service equipment are not eligible for returns unless defective! We will gladly replace any defective piece...
Working on your regulator and need this adjustment tool?
This is the 3 prong tool so make sure you do not need the 4 prong version
You must be trained and understand that use of this tool without proper training could result in injury or death! By purchasing this tool you acknowledge you have been trained and understand the proper use of this specific tool!
Notice: Service equipment are not eligible for returns unless defective! We will gladly replace any defective piece...
Working on your regulator and need this adjustment tool?
This is the 4 prong tool so make sure you do not need the 3 prong version
You must be trained and understand that use of this tool without proper training could result in injury or death! By purchasing this tool you acknowledge you have been trained and understand the proper use of this specific tool!
Notice: Service equipment are not eligible for returns unless defective! We will gladly replace any defective piece...
* Everybody could use one of these guys! Your at home or at a dive and your tire is low on air. Well now you need not worry just have one of these in your kit and your on your way! I know it has saved me many times with my wifes car to get her on the way....
* Easily connects to any standard LP inflator hose to use
* Dual purpose: Has a Tire inflator and Air Nozzle
* Use the Rubber Air nozzle to fill inflatable beds and other inflatables that do not have a standard tire adaptor
* The Metal end fits Standard Tire adaptors with Schrader valves. Includes Split ring and quick plastic snap.
Notice: Service equipment are not eligible for returns unless defective! We will gladly replace any defective piece...
This allen head fits the Hog regulator and many others so you can replace your old piece with our new allen head to work on more regulators or just your Hog / Edge ones!
This fits our Deluxe 2nd stage regulator adjusting tool with gauge "Universal Head Model" by replacing the old allen head in the tool with our new one this will take care of many of the regulators you used to have issues working on
We had this allen head built for us to solve this issue
Notice: Service equipment are not eligible for returns unless defective! We will gladly replace any defective piece...
Our newest tool kit comes with the following items
* 1 Multi-propose star tool
* 1 Metric wrench
* 40 Buna O-Rings Assorted sizes in a plastic container to reuse
* 1 10ml / 1/4oz Silicone grease tube
This kit comes in a plastic resealable bottle to keep everything dry while not in use! Includes a nice cloth pouch that is secured with an elestic band holding it together while in your plastic bottle!
This color adapter set is made from aluminum which is wear resistant and not easy to damage. These small / compact handles also have o-rings to not allow dirt inside your regulator while not in use
Blue handle plug is for low pressure while the red is for use with your high pressure ports
This color adapter set can be easily installed and removed to protect your first stage
These small handle plug / adapters are compact so,it is easy to carry with you during your diving in case you need to work on your first stages
Made from Lightweight aluminum so you can bring these in your save a dive kit!
Specification:
Material: Aluminum
Size Chart:
Low Pressure Thread: 3/8-24 BLUE Colored High Pressure Thread: 7/16-20 RED Colored
Our latest flatt tool uses thee following metric wrenches to aid your work on your scuba gear!
microtool with 7 flat wrenches:
10-12-13-14-15-16-17 mm
This tool is just over 5 1/4" inches overall length / max width is roughly 1 3/4" inches making this another perfect tool to have handy for those just in need times!
Looking for another star tool that also may fit right into your needs? Well check out this one
This star tool has the following
4 Allen Head : 4-5-6-8 mm. 4 flat wrenches: 13-14-15-17 mm.
This is also a heavy duty tool. When you pick this tool up you may be surprise at the weight of this little guy. Since most of our products are produced in overseas country this tool is a needed part of your save a dive tool kit
This tool is just under 3 1/2" inches by 3 1/2" inches in diameter
Our latest flatt tool uses thee following metric wrenches to aid your work on your scuba gear!
microtool with 7 flat wrenches:
10-12-13-14-15-16-17 mm
This tool is just over 5 1/4" inches overall length / max width is roughly 1 3/4" inches making this another perfect tool to have handy for those just in need times!
Our newest pick set is made from stainless steel with a rainbow tint on them making them stand out
This set has different pick ends so you can choose which is best for removing that o-ring you are working on
Please note that most scuba products are made out of a brass base and electro-coated with a finish so when using these picks you need to be careful not to dig into your item
These also now come in a semi-clear plastic clamshell to hold your picks!
Deluxe UltraSonic Cleaner: For a Professional, Microscopic Clean!
For a truly professional clean, nothing beats an ultrasonic cleaner. The Global Scuba Manufacturing Deluxe UltraSonic Cleaner is a powerful, top-of-the-line machine designed for service technicians who demand a microscopic level of cleanliness for scuba regulator and valve components.
The Power of Ultrasonic Cleaning:
This machine uses a powerful 320-watt generator to create high-frequency vibrations in your cleaning solution. This process, called cavitation, creates millions of tiny, powerful bubble implosions that scour every surface of the submerged parts. This "blasting" action silently and effectively removes stubborn contaminants like grime, rust, oil, and grease from metals, plastics, and rubber—reaching intricate internal spaces that are impossible to clean with brushes.
Designed for a Professional Workflow:
This cleaner is built to improve the efficiency of your service bench. The generous 3.4-quart (3.2 Liter) stainless steel tank is large enough to hold the components from several dismantled regulators at once, allowing you to clean multiple sets of gear simultaneously. Professional controls include automatic cavitation tuning for optimal performance and an adjustable cycle timer for precise control over the cleaning process. A convenient drain plug makes solution changes quick and clean.
Please Note: To prevent damage to your parts and the unit, small components should not be placed directly on the bottom of the tank during operation. A stainless steel mesh basket is the perfect companion for this unit and is available as a separate add-on.
NOTE: The basket does not come with the ultra sonic cleaner but you can order it in our drop down box!
This tool helps you guide a o-rings into place without damage
This tool uses a 3/8 thread to screw onto the piece your needing to slid an o-ring into place without any damage
Piranha's Price: $10.99
Service Tools
Tools for divers who do their own maintenance. We stock second stage adjustment tools with multiple long and short slotted tips, the Piranha 18 in 1 star tool, flexible cylinder inspection lights and deluxe tank handle screwdrivers.
