Tired of your second-stage hose tugging at your mouth when you turn your head? Using a swivel adapter can eliminate this annoying problem. Your second-stage hose will have a lot more maneuverability when attached to a swivel.
The Standard Omni Swivel adapter is a 360°-degree rotating adapter that makes hose connections more comfortable. By allowing your low-pressure hose to swivel makes for a comfortable connection from your tank.
Whats new is on the main swivel we added an o-ring to keep dirt out and allows the swivel to keep moving freely
Also new is side interlocking feature now makes it impossible for the swivel to come apart while underwater!
Even just turning your head becomes a more simplistic task. You can also say goodbye to jaw fatigue because your constant struggle with hose tugs ends with the Omni Swivel.
It connects a standard low-pressure 9/16 -18 threaded regulator hose to a standard 9/16 -18 threaded 2nd stage.
Easy to install and intended for low pressure use only Below 200 psi (13.8 bars). Swivel measures (L x O-Dia.) 3" x 1" (7.6cm x 2.54cm), comes factory equipped with Viton O-rings, so it's made with 02 compatible materials.
Omni Swivel Standard Features
Omni Swivel Standard
Increase Comfort and Reduce Jaw Fatigue
Reduces "Pulling Feeling"
Rotating Swivel Action
360°-Degree Rotating Adapter
Installs to a standard Second-Stage-End of Regulator Hose
9/16"-18 Male (Connects to a standard regulator hose) with a quick connect on the other side that works with either the locking or non-locking OmniSwivel Seaquest quick release adapters
Details:
Female QD has lock built into sleeve. Once connected, rotate the sleeve counter-clockwise 90deg to engage the lock.
This adapter works with the OmniSwivel QDYF-S adapter whic you can also purchase from us! "Refer to item: Non-Locking or Locking SeaQuest Quick Release High Flow Adapter Set"
Has male 9/16 threads to connect your low pressure hoses too
Uses a SeaQuest type female fitting with a knurled end to hold your LH-A adapters use the Seaquest type fitting or Seaquest fittings in place
NOTE: If you have the locking ring model::::Uses a rotating ring to hold the small adapter locked in until you move the ring into the release depression on the ring which allows you to release the two from being connected!
NOTE: You are purchasing a kit which comes with both fitting!
This is also used on the Kiss rebreather upgrade
More Details:
Female QD has lock built into sleeve. NOTE: If you are using the locking ring model!
Once connected, rotate the sleeve counter-clockwise 90 degrees to engage the lock.
Solid Brass Construction Made with 02 compatible materials
Female QD: 9/16"-18 Male (Connects to a standard regulator hose) Male QD: 9/16"-18 Female (Connects to a standard regulator fitting or all OmniSwivel's)
NOTE: Can be used with OTS Guardian Full Face Masks and OTS Stealth FFMs
1" OD, convex design with hard knurrel suited for cold water use.
Arrow indicates flow ON direction
Using this type of Shut-off valve can keep a diver from purging valuable gas from the octopus during a dive. This shut off has a positive locking design which make this unit almost impossible to shut-off this unit and can not be accidentally turned on and off during a dive
Details:
Delrin Sleeve
Solid Brass Construction
Made with 02 compatible material
9/16"-18 Male on one side (Connects to a standard regulator hose) 9/16"-18 Female on the other side of this shut off (Connects to a standard regulator)
Designed to fit between the octopus regulator with a standard low pressure scuba hose.
Delrin Sleeve makes this shut off a very durable unit and is built with oxygen compatible materials.
This adapter is supplied by OmniSwivel International, this high quality swivel adapter screws in-line between the low pressure hose and the first stage regulator body.
This allows you to split one low pressure port to double low pressure ports.
It allows swivel movement of one of the hoses at the first stage, the other port is a fixed position pass through, and can be used to streamline the area of the first stage by providing tighter hose routing.
This is the low pressure version and it has 3/8-inch M-F fittings, chromed solid brass construction and is Nitrox Ready.
When you need to service this adapter use:O-rings needed to service : Qt 1 - 010, and Qt 2 - 012 Viton o-rings recommended
Description:
3/8"-24 Male Inlet
2 ports 3/8"-24 Female Outlet
L Shaped
90 degree offset
Details:
Solid Brass Construction Made with 02 compatible materials
This adapter allows you the ability to split a high pressure hose
Has two 7/16-20 female ports located at the top end
Has one 7/16-20 male port located at the bottom
This adapter gives you 2 high pressure ports coming off your first stage
This adapter allows the addition of a wireless transmitter on one port and an Spg on the other port! We also have a short 4 1/2" inch hp hose so you can make a very short tail to work with if you choose
9/16"-18 male with 1lb built in check valve. Connects to any low pressure port or hose.
Details:
Male QD contains 1lb check valve allowing disconnection and attachment underwater, while keeping water from flooding the system.
Solid Brass Construction
Made with 02 compatible material
Also note the following when connecting this to your air supply system! Make sure you test your system to ensure enough air flow when diving!! You can not use a standard BC inflator QD hose Schrader fitting to supply a regulator 2nd stage or a BC integrated alternate air source, as the device would not receive enough gas due to the flow restriction of a standard Schrader fitting
All of Omni products are made in the USA with over 40 years' experience manufacturing diving related products.
Tired of your second-stage hose tugging at your Interspiro AGA Full Face Mask (FFM), when you turn your head? By using this swivel adapter it can eliminate this annoying problem most divers have. Your FFM hose will have a lot more maneuverability when attached to this swivel.
The AGA Omni Swivel Adapter is a 360° rotating adapter that makes hose connections more comfortable. By allowing your low-pressure hose to swivel makes for a comfortable connection from your tank. Even just turning your head becomes a more simplistic task. It connects a standard low-pressure 9/16 -18 threaded regulator hose to a AGA 2'nd stage regulator inlet fitting.
Simple to install and intended for low pressure use only Below 200 psi (13.8 bars). Swivel measures (L x O-Dia.) 3" x 1" (7.6cm x 2.54cm), comes factory equipped with Viton O-rings, so it's made with 02 compatible materials.
Some Features of this Swivel
Omni Swivel AGA 2nd Stage:
All Omni Products Made in the USA
Less Tugging on Full Face Mask
Rotating Swivel Action
360° Rotating Adapter
Installs to Second-Stage-End of Regulator Hose
Adapter Swivels to Correct Angle to Mask
Compatible w/Interspiro Full-Face Mask
All Stainless-Steel Construction
Low Pressure Use Only - Below 200 psi (13.8 bars)
Factory Cleaned - Viton O-Rings
Made w/O2 Compatible Materials
Connects 9/16"-18 Threaded Female Hose End to AGA 2'nd Stage Regulator Inlet Fitting
Dimensions: (L x O-Dia.) 3" x 1" (7.6cm x 2.54cm)
Simple installation
Piranha's Price: $99.99
OmniSwivel Adapters
OmniSwivel fittings for reducing hose strain and adding shut offs. We stock the SW-S Model 2.0 that connects a standard hose and regulator, 9/16-18 male to 3/8-24 female check valves, 9/16-18 to 9/16-18 1lb check valves, non-locking SeaQuest quick release high flow adapter sets, and 1 inch OD shut off valves.
