We are proud to offer our newest color! Ocean Blue.. It has taken years to find this underwater webbing with all the right features. We love adding colors to our dive rigs too make us stand out from the crowd and know our diving rig verses another diver! Just like our orange, pink and yellow webbing we got this new color which is an amesome looking blue color!!
This orange color is like our smb's orange color which is just the right brightness for visability when diving We use a professional grade of nylon webbing which can be used for many applications
Our webbing is a on the is what we called standard stiffness which is used mainly for harnesses and weight belts becuase it has some flexibility but also is slightly flexible. A great webbing to use
This webbing is just softer in flex than our med stiff red and other color webbing
Used for weight belts and other applications
Our webbing is made to be more durable for underwater use making it last longer and works better on weight belts, harnesses and backstraps and cam straps!
This webbing is design for marine use and will hold up very well with underwater use
We are proud to offer our newest color! Safety YELLOW.. It has taken years to find this underwater webbing with all the right features. We love adding colors to our dive rigs too make us stand out from the crowd and know our diving rig verses another diver!
This is a perfect color of not a neon yellow color or a goldish color but yet gives you a great looking harness or other items we build with this color!
We use a professional grade of nylon webbing which can be used for many applications
Our webbing is a on the is what we called standard stiffness which is used mainly for harnesses and weight belts becuase it has some flexibility but also is slightly flexible. A great webbing to use
This webbing is just softer in flex than our med stiff red and other color webbing
Used for weight belts and other applications
Our webbing is made to be more durable for underwater use making it last longer and works better on weight belts, harnesses and backstraps and cam straps!
This webbing is design for marine use and will hold up very well with underwater use
We are proud to offer our newest color! Soft PINK.. It has taken years to find this underwater webbing with all the right features. We love adding colors to our dive rigs too make us stand out from the crowd and know our diving rig verses another diver!
Thiis color pink is not like a hot or neon pink color but is like a pastel pink which is slightly softer in color but awesome looking
We use a professional grade of nylon webbing which can be used for many applications
Our webbing is a on the is what we called standard stiffness which is used mainly for harnesses and weight belts becuase it has some flexibility but also is slightly flexible. A great webbing to use
This webbing is just softer in flex than our med stiff red and other color webbing
Used for weight belts and other applications
Our webbing is made to be more durable for underwater use making it last longer and works better on weight belts, harnesses and backstraps and cam straps!
This webbing is design for marine use and will hold up very well with underwater use
We are proud to offer our newest color! Safety ORANGE.. It has taken years to find this underwater webbing with all the right features. We love adding colors to our dive rigs too make us stand out from the crowd and know our diving rig verses another diver!
This orange color is like our smb's orange color which is just the right brightness for visability when diving We use a professional grade of nylon webbing which can be used for many applications
Our webbing is a on the is what we called standard stiffness which is used mainly for harnesses and weight belts becuase it has some flexibility but also is slightly flexible. A great webbing to use
This webbing is just softer in flex than our med stiff red and other color webbing
Used for weight belts and other applications
Our webbing is made to be more durable for underwater use making it last longer and works better on weight belts, harnesses and backstraps and cam straps!
This webbing is design for marine use and will hold up very well with underwater use
We just got these back in stock and for a short period you can save $15.00 off our normal pricing! Do not miss out if you were looking for a gold plate with all the features you need to get your dive rig set-up!
Our backplate is made from 5051 Aluminum
Weight is 1lb 10oz for just the plate!
Has the slot for easy doubles set-up
All the slots are smooth with no sharp edge to cut your webbing!
Bottom corner of our plate is slightly curved backwards for a more comfortable dive experience
Also has slots for cam straps to be used in place of a single tank adapter or if you prefer you can use an STA
We have a new Tec backplate made out of aluminum 5052
This high performance aluminum tec scuba diving back plate is lightweight and durable with high strength with strong corrosion resistant and wear-resistant
The outside edge "Perimeter" has 7/16" side holes for mounting lights, tank bottles, lift bags and other accessories
Has 3 slots to route cam straps for the best balance when diving with a single tank
Has 2 slots for crotch straps either 1" inch or you can use the wider slot for either 1 1/2" or 2" inch crotch straps
Using for doubles no problem with have 3 alignment holes near the top with a full open slot near the bottom so sliding your tanks bolts a as easy as 123!
Bult with a deep channel so your bolts will not stick you in your back! This plate is very comfortable to wear and a breeze to set-up your harness to it
Built for use with 2" inch wide webbing.
Specification:
- Material: High strength 5052 Aluminum
- Size (L x W): Approx. 39.7 x 26 cm/15.6 x 10.2 inch
- Net weight: around 500 gram / 17.6 Oz! / 1.2.0lbs
We have a new Keep Diving Tec backplate made out of aluminum T6061
We only brought in a limited number after we tested this product to see who diver's like this design
This is an awesome backplate for everyday diving or if you want to travel take this plate along since it is lightweight but has all the features of those more expensive plates on the market today
This high performance aluminum tec scuba diving back plate is lightweight and durable with high strength with strong corrosion resistant and wear-resistant
The outside edge "Perimeter" has side holes for mounting lights, tank bottles, lift bags and other accessories
Has 4 slots to route cam straps for the best balance when diving with a single tank for even more adjustments in your trim
Has 1 slot for use with the standard 2" inch slot crotch straps
Using for doubles no problem with have 3 alignment holes near the top with a full open slot near the bottom so sliding your tanks bolts a as easy as 123!
Bult with a deep channel so your bolts will not stick you in your back! This plate is very comfortable to wear and a breeze to set-up your harness to it
Built for use with 2" inch wide webbing.
Specification:
- Material: High strength T6061 Aluminum
- Size (L x W): Approx. 15.43" inches / 392MM (Length) * Almost 11" inches / 278MM (Wide) and 3MM (Thick)
Our Quick adjust 2" inch slider make donning on or off your harness a breeze with our newest piece!
Made out of SS304 stainless steel with a colored aluminum bar.
Now you ask what is the 15mm? That is the height and thickness of the aluminum bar since we have a 12mm in pink also which is slight lower and thinner bar. The height really depends on what you feel you want to use with your webbing
These do have small serrated teeth and really only grab when in use and not when donning your harness
Our 2 Inch crotch strap works with our backplates and many others on the market today!
Our 2 inch crotch strap runs from the adjustable part of the strap on the rear to mount to the slot in the backplate to the front where the loop goes on the waist belt webbing at the front of your harness and we use a plastic quick release buckle to quickly get out of your rig!
Using this crotch strap helps to maintain your harness from moving up on our body during a water entry from a boat or while ascending during your dive. Also by holding your rig in place this prevents your cylinders/valves from contacting your head
Our strap has a 2 inch stainless steel scooter ring for use with diver propulsion vehicles at the front of the strap right below the webbing loop.
You can also use this 2 inch scooter ring for applications such as a temporarily place to clip off an item such as reels, dive lights, spools or camera's.
On the backside of the strap we have a place for a 5mm 6mm stainless steel d-ring that uses a slider so you can adjust it for your final positioning.. You can purchase this d-ring from our drop down box below
We use a 2" inch soft black webbing so it does not cut into your wetsuit material or cause any damage that stiffer webbing can cause
The 2 inch webbing creates a distribution of weight because of the width provides a greater secure feeling during those dives
We added this STA since some folks wanted the hardware not to be weilded onto the STA which this model does not
Our single tank adapter has a bolt pattern of 11" on centers that work with all backplates and wings! One of the slots is longer so just like most wings which have the adjustable slot this STA has the same!
Comes complete with stainless steel hardware
Our adapter is 12" inches long
Our single tank adapter has 3 slots for your choice of locating your tank bands for the best location to secured your tank!
Complete adapter with hardware is under 1lb!
The hardware is loose and the bolt is NOT weilded into the STA alignment hole
We use a professional grade of nylon webbing which can be used for many applications and this webbing is our heavy duty soft webbing we were able to get!
This webbing is slightly softer than our standard version. If your looking for a soft / conforming webbing to you and your harness this could be your webbing..
NOTICE: We would not recommend this webbing for weight belt use since it is softer and may roll with that weight being applied on it! This webbing is more for harness use where you want it to conform and hug your body
our webbing is made to be more durable for outdoor weather environments making it last longer and works better on weight belts, harnesses and backstraps!
We use a professional grade of nylon webbing which can be used for many applications
This medium stiff webbing is just has a little more stiffness then our standard black webbing which is soft and flexible. This one is right between our standard bersion and our stiffest version. We love this one for harnesses
Our webbing is a little stiffer than most webbing and made to be more durable to outdoor weather environment making it last longer and works better on weight belts, harnesses and backstraps!
Piranha has come up with a another travel backplate with an easy carry handle!
This plate comes with multiple slots so you can vary your adjustments on your harness
Dual rail slots on the back to hold your your cylinder
Rear rail slots on the back align the cylinder and make this plate very stiff!
Made for diving with a single cylinder but can be used with doubles also! Has the hardware holes for doubles use!!
This tough and very durable backplate will last years od service and your back will thank you for lightening the load
This backplate comes with harness and be ready to go! You just need to add a tank cam strap to slip on and ready to go!
***Our standard harness included with this plastic heavy duty backplate includes item below!
** Soft black 2" inch wide webbing for a comfort fit
** Stainless steel buckle and 3 6mm straight D-rings with slides
** Stainless steel buckle!
** The harness is already been built so no guess work just add a tank cam strap. If you have one then just order this kit if not go check out our different type to see which one best fits your needs
Want to add a little more comfort down at your waist? Add our waist pads to do just that
Uses a 2" inch smooth slide to help hold in place during your dive with 2 sewn bands on each end. This allows you to slide your 2" inch webbing thru the sewn in bands with the slide make it lock in position once you align your waist pads
You get 2 comfort pads in your package
The short pad is roughly 9 3/4" / 24cm long where it is padded for comfort
The long one is 11 3/4" inches long covering more area
At Piranha we keep offering you more choices when you want to build your rig or just want to stand out from a crowd! We now are offering one of our newest colors in our soft Nitrox Green Webbing..
We use a professional grade of nylon webbing which can be used for many applications
Our Nitrox Green webbing is a is a standard stiffness and our webbing is made to be more durable to outdoor weather environment making it last longer and works better on weight belts, harnesses, Crotch Straps and backstraps!
Our 1 1/2" Inch crotch strap works with our backplates and many others on the market today!
Our 1 1/2" inch crotch strap runs from the adjustable part of the strap on the rear to mount to the slot in the backplate to the front where the loop goes on the waist belt webbing at the front of your harness
Using this crotch strap helps to maintain your harness from moving up on our body during a water entry from a boat or while ascending during your dive. Also by holding your rig in place this prevents your cylinders/valves from contacting your head
Our strap has a 1 1/2" inch BLACK stainless steel scooter ring for use with diver propulsion vehicles at the front of the strap right below the webbing loop.
You can also use this 1 1/2" inch BLACK scooter ring for applications such as a temporarily place to clip off an item such as reels, spools or camera's.
We use a 1 1/2" inch soft black webbing so it does not cut into your wetsuit material or cause any damage that stiffer webbing can cause
The 1 1/2"-inch continuous webbing crotch strap is preferred by tec divers who use Scooter's or DPVs for extended dive periods. The 1 1/2 inch webbing creates a distribution of weight because of the width provides a greater secure feeling during those dives
This strap uses a 2 piece plastic snap to quickly release yourself from your rig
Also uses 2 heavy duty plastic slides to adjust for that perfect fit!
At Piranha we keep offering you more choices when you want to build your rig or just want to stand out from a crowd! We now are offering one of our newest color in our soft Webbing..High Vis Yellow
We use a professional grade of nylon webbing which can be used for many applications
Our High Vis Yellow webbing is a is a standard stiffness and our webbing is made to be more durable to outdoor weather environment making it last longer and works better on weight belts, harnesses, Crotch Straps and backstraps!
NOTE: The webbing is a dark navy blue just a little darker then our picture is showing! Be aware!!
We use a professional grade of nylon webbing which can be used for many applications
Our webbing is a little stiffer than most webbings and made to be more durable to outdoor weather environment making it last longer and works better on weight belts, harnesses and backstraps!
We use a professional grade of nylon webbing which can be used for many applications
Our blue webbing is a is a standard stiffness and our webbing is made to be more durable to outdoor weather environment making it last longer and works better on weight belts, harnesses and backstraps!
We build these using a 2" inch slider which allows you to adjust your final overall length..
Use for securing your cylinder
Strap length is 35 1/5" long by 2" wide roughly!
Has velcro to hold strap in place
Adds roughly 1 pound per camband. You can remove lead-weight off your belt!
Our cam straps are adjustable! We use a 2 inch SS slider which allows you to fit a large cylinder to a small pony bottle with the same strap!
You are purchasing one (1) camband. If you require two (2) please adjust your qty.
Does NOT come with a removable anti-slip pad! Since many cam straps have them we did not add this and keeping your costs lower!! You can order the slip pads from our drop down box below if you need them!
Our reinforced delrin cam buckle is a perfect replacement
You can adjust the strap by the stainless steel slider by the buckle
Length of strap is approximately 35 inches long
Velcro to secure your cylinder on your back
Does NOT come with a removable anti-slip pad! Since many cam straps have them we did not add this and keeping your costs lower!! You can order the slip pads from our drop down box below if you need them!
We use a professional grade of nylon webbing which can be used for many applications
This webbing is a little stiffer than our medium Stiff black webbing and this is for divers looking for just a little more stiffness! This is our stiffest
Our webbing is a little stiffer than most webbing and made to be more durable to outdoor weather environment making it last longer and works better on weight belts, harnesses and backstraps!
We use a professional grade of nylon webbing which can be used for many applications
Our webbing is a little stiffer than most webbing and made to be more durable to outdoor weather environment making it last longer and works better on weight belts, harnesses and backstraps!
We use a professional grade of nylon webbing which can be used for many applications
Our webbing is a little stiffer than most webbing and made to be more durable to outdoor weather environment making it last longer and works better on weight belts, harnesses and backstraps!
We use a professional grade of nylon webbing which can be used for many applications
Our blue webbing is a is a slightly stiffer webbing and our webbing is made to be more durable to outdoor weather environment making it last longer and works better on weight belts, harnesses and backstraps!
Specs
Rated Tensile Strength 4,575 ?- 5% Lbs.
Weight (oz/yd): 2.3 ?- .05
Width: 1 15/16 ? 1/32
Thickness .075?.005
Picks: 31 ?- 1
Marine grade quality "heavy duty"
You are purchasing BLUE webbing which is slightly darker then our blue standard webbing!
Our 2 Inch crotch strap works with our backplates and many others on the market today!
Our 2 inch crotch strap runs from the adjustable part of the strap on the rear to mount to the slot in the backplate to the front where the loop goes on the waist belt webbing at the front of your harness
Using this crotch strap helps to maintain your harness from moving up on our body during a water entry from a boat or while ascending during your dive. Also by holding your rig in place this prevents your cylinders/valves from contacting your head
Our strap has a 2 inch stainless steel scooter ring for use with diver propulsion vehicles at the front of the strap right below the webbing loop.
You can also use this 2 inch scooter ring for applications such as a temporarily place to clip off an item such as reels, spools or camera's.
On the backside of the strap we use a 5mm stainless steel d-ring that uses a slider so you can adjust it for your final positioning
We also include a 2" inch wide rubber loop that you can slide along the crotch strap webbing
We use a 2" inch soft black webbing so it does not cut into your wetsuit material or cause any damage that stiffer webbing can cause
The 2-inch continuous webbing crotch strap is preferred by tec divers who use Scooter's or DPVs for extended dive periods. The 2 inch webbing creates a distribution of weight because of the width provides a greater secure feeling during those dives
We use an electroplated process to make our assembly screws
This allows our assembly screws to very durable and take the harsh conditions of our diving environments
Any accessory using grommets, you can use these screws to mount that item to your rig! Items backplate pads, liftbag pouches, buttplates and other items
We use o'rings on the inside of each end, This allows the screws to hold in place and not need a lock washer!
Rigging for use with your aluminum 80 or low preesure 85 cylinders. We found that if your cylinder has a 7" inch to 7 1/4" diameter you can use this holding system to clip off too
Uses 1 1/2" webbing and a stainless steel buckle
Large stainless steel snap with an adjustable slider to get your rigging just right for your dive
- Made out of a premium marine grade 316 stainless steel for diving use on backplates pads and other scuba uses. These are1 piece and male and female end you are purchasing. The flat bottom allows for a better fit when securing items on to your rig
- These Lightweight, strong, sturdy, high strength and corrosion resistant in saltwater circumstance
- Used to attach equipment accessories such as mesh bag with grommet on to the backplate
- Universal fits the standard holes on any standard backplate
- Great gear replacement accessories for underwater scuba diving,
So we built a d-ring to mount onto almost any backplate! How you ask? Well we made one of the holes fixed so your d-ring stays located in the same area and then we made a 2 1/4" long slot so no matter where you mount it and on any of the different made backplates you can secure the bottom hardware by sliding it to match up with another hole in your backplate!!
We also made this d-ring just a little larger then normal to make sure you can find it with ease on the side of your plate! Ir reaces out 1 5/8" inches measuring the inside of the D
We also supply all the needed 3/8"-16 stainless steel hardware and use a nylon insert lock nut to hold it tightly to your plate. Our kit includes:
1 Backplate D-Ring ** 304 marine grade stainless
2 7/32 Hex Head button cap screw **316SS
* You need a 7/32 Allen Head Tool for this bolt
2 Nylon insert lock nut **316SS
4 Washers **316SS
Overall Measurements:
3 1/2" inches long
2 5/8" inches wide
1/4" thick
1 5/8" inside D measurement
Slot Measurement: Middle of fixed hole to shortest to furtherest slot length: 15/16" to 3" inches
Your backplate D-Ring has been tumbed for at least 48 hours giving it a smooth finish with no sarpe edges
If you want your D-ring slightly bent select from our drop down box below and make sure to read to know how the bend will be facing
* Example: If you select the fixed hole on the top and you want your D-ring slightly bent forward it means your bend is slightly in front of your backplate hardware and if bent backwards it would mean your bend is slightly behind where you mount it...
Here is a backplate pad all set to be mount to your backplate! Comes complete with mounting screws and this pad has an inner sleeve to hold your smb or liftbag!
This design will fit most aluminum and stainless backplates!
NOTE: This will not fit the dog bone stlye backplate!!
Material:1680D nylon with PU coating to give you a long lasting backpad!
Our trim pockets hold upto 5lbs pound of soft or hard weight
Velcro closure holds the secure while diving
Pocket has a grommet hole at the bottom for quick drainage
The backside has velcro tabs so it is easy to place on or off
We do recommend that you purchase weight belt keepers one for each side. These keepers keep your pocket from slidding around during your dive! If your using these on your tank strap then you do not need the keepers to hold the trim pocket in place
Made in a heavy conduro material so it will last longer during harsh use
* This pocket is not just for IST products but can be used in many diving applications!
* Uses an inner sleeve on the backside to which you can slide 2" inch webbing through it for a stable weight pocket
* Uses an inner pocket to hold your weight "Up to 8.8lbs!
* The outer end of this pocket is made from a 1680D Heavy Duty nylon allowing you to dive in the harest conditions since this pocket will hold up!
* Has a 5mm D-Ring on the outside to clip items as you see fit
* A simple heavy dity plastic buckle hols your weights in place and by releasing the buckle your weights will come right out!* You can use this weight pocket with alum or stainless backplates. It has a grommet at the end of the pocket which you can use an assembly pocket to lock this pocket in place by or use weight belt clips to hold in place and not move around during a dive
* So you can use this on a backplate or your general harness with no issues!
* The inner pocket is made out of 420D nylon material
** Sold has a single pocket! Want a pair please make sure to order 2!
8.8lb (4kg) weight capacity. Outer pouch dimensions: 6 x 7 x 1.5 inches (15.24 x 17.78 x 3.81cm)
Inner pouch dimensions: appx 5 x 5.5 x 1.25 inches (12.7 x 13.97 x 3.18cm
The IST WP7 Heavy Duty, Dual Quick Release Tech BCD Weight Pocket, 15.4lb provides multiple mounting options, and a dual quick release system for maximum safety and convenience.
420D woven nylon inner pouch offers a heavy duty zip closure, drainage grommet and nylon webbing pull strap. Outer pocket is constructed of ballistic grade, heavy duty, 1680D woven nylon canvas.
Three 1.5 inch wide loops of heavy duty nylon webbing on the back of the outer pocket can accommodate a belt width of up to 2.75 inches, depending on belt thickness. One loop is sewn on in a horizontal orientation and two in a vertical orientation, so you can position the pocket as you wish on your belt or, with an additional length of webbing, on your BCD backplate. Illustrated instructions for backplate mounting are included.
The pocket opens via a quick release buckle and Velcro® flap at one end, and with a dual, heavy duty zipper at the other. In an emergency, if obstruction, heavy gloves, injury, or other limitations interfere with operating the quick release buckle and Velcro® flap, unzip the opposite end to release the inner weight pouch. Extra-large zipper pulls make it easy to open the pocket in either direction.
Place your dive weight(s) up to a maximum capacity of 15.4lb (7kg) inside the inner pouch, zip closed, then insert into the outer pocket with the pull strap exposed at either the zipper or flap end, as you prefer. Close the outer quick release buckle and seal the Velcro® flap, and you’re ready to hit the water.
NOTE: Sold per pocket!
8.8lb (4kg) weight capacity.
Outer pocket dimensions: 6.5 x 9 x 2 inches (16.51 x 22.86 x 5.08cm)
Inner pouch dimensions: appx 5 x 8 x 1.75 inches (12.7 x 20.32 x 4.45cm)
Product Details:
Quick release weight pocket for attachment to backplate or belt opens at both ends
Constructed of heavy duty 420D and 1680D nylon canvas
Inner weight pouch pulls out quickly in an emergency
Heavy duty nylon webbing strap with quick release buckle and Velcro® flap
Travel plates are often used in the tropics where minimal thickness exposure suits are worn. As such, a back pad is used so that the diver doesn’t have to feel the hard plate on their back. The Highland Back Pad is custom made specifically for the ultralightweight Aluminum Travel Plate. It is neutrally buoyant, has a large utility pocket and includes the attachment hardware.
Attaches to the Highland Aluminum Travel Plate (p/n HL801-TP) using 4 plastic book screws (included)
An integrated large utility pocket is ideal for carrying lift devices or other accessories
The comfort comes from the use of 3D open cell mesh foam. Open cell foam does not add inherent buoyancy and it drains and dries quickly
*Looking for no bump ties but only need a few? Well we sell them by the piece so you can get a few with a couple extra and not have to carry so many you will have them for a lifetime!
* Improve your diver's comfort & safety.
* Low profile and smooth with head height of .103in.
With continuous weave harnesses, it can often be difficult to tighten the shoulders by pulling on the waist straps. This is due to friction caused by the tortuous path that the webbing makes as it goes through the dual slots in the backplate.
This Slide Bar mounts on the back of the plate "Stainless or Alum", between the slots. The slick, rounded surface minimizes the friction and makes the waist straps easier to pull through. Plus with the raised edges it helps keep the webbing from wondering off and causing issues when you pull your harness to tighten it to your body
Place these near the bottom sides on the left and right webbing slots to make these work properly
Our Quick adjust 2" inch slider make donning on or off your harness a breeze with our newest piece!
Made out of SS304 stainless steel with a colored aluminum bar.
Now you ask what is the 12mm? That is the height and thickness of the aluminum bar since we have a 15mm in blue also which is slight higher and thicker bar. The height really depends on what you feel you want to use with your webbing
These do have small serrated teeth and really only grab when in use and not when donning your harness
Want to add a little more comfort down at your waist? Add our waist pads to do just that
Uses a 2" inch smooth slide to help hold in place during your dive with 2 sewn bands on each end. This allows you to slide your 2" inch webbing thru the sewn in bands with the slide make it lock in position once you align your waist pads
You get 2 comfort pads in your package
The short pad is roughly 9 3/4" / 24cm long where it is padded for comfort
The long one is 11 3/4" inches long covering more area
Our reinforced delrin cam buckle is a perfect replacement and now is in colors to get you more of a custom look!!
You can adjust the strap by the stainless steel slider by the buckle
Length of strap is approximately 35 inches long
Velcro to secure your cylinder on your back
NEW! We now have color buckles in Blue, Red and Yellow! Add more color to your rig and never get confused who's rig it is on the dive boat!!
You get the color buckle that you choose! plus a 2" inch wide tank strap that you can adjust with the stainless steel slider you are supplied with also!!
Does NOT come with a removable anti-slip pad! Since many cam straps have them we did not add this and keeping your costs lower!! You can order the slip pads from our drop down box below if you need them!
*Looking for no bump ties but only need a few? Well we sell them by the piece so you can get a few with a couple extra and not have to carry so many you will have them for a lifetime!
* Improve your diver's comfort & safety.
* Low profile and smooth with head height of .103in.
Our latest light weight highly polished stainless steel backplate has many features listed below for rec to tech divers! A mirror like finish gives it a very cool look!
Our plate has 3 holes at the top of the plate with a slot at the bottom that allows you to quickly mount your plate with ease!!
This backplate also has slots so you can use cambands instead of an STA for an even closer placement of your diving cylinder
Our plate has mounting holes along both sides and at the bottom to rig your gear for your type of diving
Our mirror like finish on the 316 stainless is a awesome looking and no one will be walking off without being seen with this plate!plus being #316 marine grade stainless is highly rust resistance
The center channel is recessed to not allow your STA / Bc bolts to dig at your drysuit or wetsuit
Weighs in roughly at 2lbs 13oz gives you a light weight travel plate but still tough as nails!
We use a professional grade of nylon webbing which can be used for many applications
This medium stiff webbing is just has a little more stiffness then our standard black webbing which is soft and flexible. This one is right between our standard bersion and our stiffest version. We love this one for harnesses
Our webbing is a little stiffer than most webbing and made to be more durable to outdoor weather environment making it last longer and works better on weight belts, harnesses and backstraps!
Our 2 Inch crotch strap works with our backplates and many others on the market today!
Our 2 inch crotch strap runs from the adjustable part of the strap on the rear to mount to the slot in the backplate to the front where the loop goes on the waist belt webbing at the front of your harness
Using this crotch strap helps to maintain your harness from moving up on our body during a water entry from a boat or while ascending during your dive. Also by holding your rig in place this prevents your cylinders/valves from contacting your head
Our strap has a 2 inch stainless steel scooter d-ring for use with diver propulsion vehicles at the front of the strap right below the webbing loop.
You can also use this 2 inch scooter d-ring for applications such as a temporarily place to clip off an item such as reels, spools or camera's.
On the backside of the strap we use a stainless steel d-ring that uses a slider so you can adjust it for your final positioning
We also include a 2" inch wide rubber loop that you can slide along the crotch strap webbing
We use a 2" inch soft black webbing so it does not cut into your wetsuit material or cause any damage that stiffer webbing can cause
The 2-inch continuous webbing crotch strap is preferred by tec divers who use Scooter's or DPVs for extended dive periods. The 2 inch webbing creates a distribution of weight because of the width provides a greater secure feeling during those dives
We now have our Black Anodized assmebly screws just like our stanadard assembly bolts just with the black anodized.
We use an electroplated process to make our assembly screws
This allows our assembly screws to very durable and take the harsh conditions of our diving environments
Any accessory using grommets, you can use these screws to mount that item to your rig! Items backplate pads, liftbag pouches, buttplates and other items
We use o'rings on the inside of each end, This allows the screws to hold in place and not need a lock washer!
With continuous weave harnesses, it can often be difficult to tighten the shoulders by pulling on the waist straps. This is due to friction caused by the tortuous path that the webbing makes as it goes through the dual slots in the backplate.
This Slide Bar mounts on the back of the plate "Stainless or Alum", between the slots. The slick, rounded surface minimizes the friction and makes the waist straps easier to pull through. Plus with the raised edges it helps keep the webbing from wondering off and causing issues when you pull your harness to tighten it to your body
Place these near the bottom sides on the left and right webbing slots to make these work properly
You can now either select a stainless steel or a reinforced delrin cam buckle in colors to get you more of a custom look!! You will select what you want to build your own tank strap from our drop down boxes. We offer many choices to get your custom look
You can adjust the strap by the stainless steel slider by the buckle that is supplied with your buckle
Length of strap is approximately 38+ inches long
Velcro to secure your cylinder on your back of your tank
NEW! We now have color buckles in Blue, Red and Yellow! Add more color to your rig and never get confused who's rig it is on the dive boat!! Plus our standard black buckle if you want and let's not forget you can also select either of our stainless steel buckles.
Does NOT come with a removable anti-slip pad! Since many cam straps have them we did not add this and keeping your costs lower!! You can order the grip pads from our drop down box below if you need them!
You can now either select a stainless steel or a reinforced delrin cam buckle in colors to get you more of a custom look!! You will select what you want to build your own tank strap from our drop down boxes. We offer many choices to get your custom look
You can adjust the strap by the stainless steel slider by the buckle that is supplied with your buckle
Length of strap is approximately 38+ inches long
Velcro to secure your cylinder on your back of your tank
NEW! We now have color buckles in Blue, Red and Yellow! Add more color to your rig and never get confused who's rig it is on the dive boat!! Plus our standard black buckle if you want and let's not forget you can also select either of our stainless steel buckles.
Does NOT come with a removable anti-slip pad! Since many cam straps have them we did not add this and keeping your costs lower!! You can order the grip pads from our drop down box below if you need them!
You can now either select a stainless steel or a reinforced delrin cam buckle in colors to get you more of a custom look!! You will select what you want to build your own tank strap from our drop down boxes. We offer many choices to get your custom look
You can adjust the strap by the stainless steel slider by the buckle that is supplied with your buckle
Length of strap is approximately 38+ inches long
Velcro to secure your cylinder on your back of your tank
NEW! We now have color buckles in Blue, Red and Yellow! Add more color to your rig and never get confused who's rig it is on the dive boat!! Plus our standard black buckle if you want and let's not forget you can also select either of our stainless steel buckles.
Does NOT come with a removable anti-slip pad! Since many cam straps have them we did not add this and keeping your costs lower!! You can order the grip pads from our drop down box below if you need them!
You can now either select a stainless steel or a reinforced delrin cam buckle in colors to get you more of a custom look!! You will select what you want to build your own tank strap from our drop down boxes. We offer many choices to get your custom look
You can adjust the strap by the stainless steel slider by the buckle that is supplied with your buckle
Length of strap is approximately 38+ inches long
Velcro to secure your cylinder on your back of your tank
NEW! We now have color buckles in Blue, Red and Yellow! Add more color to your rig and never get confused who's rig it is on the dive boat!! Plus our standard black buckle if you want and let's not forget you can also select either of our stainless steel buckles.
Does NOT come with a removable anti-slip pad! Since many cam straps have them we did not add this and keeping your costs lower!! You can order the grip pads from our drop down box below if you need them!
You can now either select a stainless steel or a reinforced delrin cam buckle in colors to get you more of a custom look!! You will select what you want to build your own tank strap from our drop down boxes. We offer many choices to get your custom look
You can adjust the strap by the stainless steel slider by the buckle that is supplied with your buckle
Length of strap is approximately 38+ inches long
Velcro to secure your cylinder on your back of your tank
NEW! We now have color buckles in Blue, Red and Yellow! Add more color to your rig and never get confused who's rig it is on the dive boat!! Plus our standard black buckle if you want and let's not forget you can also select either of our stainless steel buckles.
Does NOT come with a removable anti-slip pad! Since many cam straps have them we did not add this and keeping your costs lower!! You can order the grip pads from our drop down box below if you need them!
You can now either select a stainless steel or a reinforced delrin cam buckle in colors to get you more of a custom look!! You will select what you want to build your own tank strap from our drop down boxes. We offer many choices to get your custom look
You can adjust the strap by the stainless steel slider by the buckle that is supplied with your buckle
Length of strap is approximately 38+ inches long
Velcro to secure your cylinder on your back of your tank
NEW! We now have color buckles in Blue, Red and Yellow! Add more color to your rig and never get confused who's rig it is on the dive boat!! Plus our standard black buckle if you want and let's not forget you can also select either of our stainless steel buckles.
Does NOT come with a removable anti-slip pad! Since many cam straps have them we did not add this and keeping your costs lower!! You can order the grip pads from our drop down box below if you need them!
Our Latest backplate is made from Carbon Fiber making this strong and super light weight and in colors!
Weight is under 1lb for just the plate!
Plate is also 3mm thick giving this backplate extra strength to handle even doubles with no problems
Has the slot for easy doubles set-up
All the slots are smooth with no sharp edge to cut your webbing!
Also has plenty of accessory holes located around the plate so you can add items like our backplate ring pieces
Another piece is slots to add trim weights in 4 places to allow you to balance yourself out
We also have 3 holes near the top center to use your single tank adapter or if your diving doubles no problem we also have a slot near the bottom side so no more tapping your bolts to line up with the holes
Also has slots for cam straps to be used in place of a single tank adapter or if you prefer you can use an STA
Dimensions:
Overall length top to bottom edge: 15 5/8" inches
Widest Part of plate: 10 1/16" inches
Top edge of plate to middle of waist slot: 14 9/16" inches
Our Latest backplate is made from Carbon Fiber making this strong and super light weight!
Weight is under 1lb for just the plate!
Plate is also 3mm thick giving this backplate extra strength to handle even doubles with no problems
Has the slot for easy doubles set-up
All the slots are smooth with no sharp edge to cut your webbing!
Also has plenty of accessory holes located around the plate so you can add items like our backplate ring pieces
Another piece is slots to add trim weights in 4 places to allow you to balance yourself out
We also have 3 holes near the top center to use your single tank adapter or if your diving doubles no problem we also have a slot near the bottom side so no more tapping your bolts to line up with the holes
Also has slots for cam straps to be used in place of a single tank adapter or if you prefer you can use an STA
Dimensions:
Overall length top to bottom edge: 15 5/8" inches
Widest Part of plate: 10 1/16" inches
Top edge of plate to middle of waist slot: 14 9/16" inches
Our Latest backplate is made from Carbon Fiber making this strong and super light weight and in colors!
Weight is under 1lb for just the plate!
Plate is also 3mm thick giving this backplate extra strength to handle even doubles with no problems
Has the slot for easy doubles set-up
All the slots are smooth with no sharp edge to cut your webbing!
Also has plenty of accessory holes located around the plate so you can add items like our backplate ring pieces
Another piece is slots to add trim weights in 4 places to allow you to balance yourself out
We also have 3 holes near the top center to use your single tank adapter or if your diving doubles no problem we also have a slot near the bottom side so no more tapping your bolts to line up with the holes
Also has slots for cam straps to be used in place of a single tank adapter or if you prefer you can use an STA
Dimensions:
Overall length top to bottom edge: 15 5/8" inches
Widest Part of plate: 10 1/16" inches
Top edge of plate to middle of waist slot: 14 9/16" inches
Our Latest backplate is made from Carbon Fiber making this strong and super light weight and in colors!
Weight is under 1lb for just the plate!
Plate is also 3mm thick giving this backplate extra strength to handle even doubles with no problems
Has the slot for easy doubles set-up
All the slots are smooth with no sharp edge to cut your webbing!
Also has plenty of accessory holes located around the plate so you can add items like our backplate ring pieces
Another piece is slots to add trim weights in 4 places to allow you to balance yourself out
We also have 3 holes near the top center to use your single tank adapter or if your diving doubles no problem we also have a slot near the bottom side so no more tapping your bolts to line up with the holes
Also has slots for cam straps to be used in place of a single tank adapter or if you prefer you can use an STA
Dimensions:
Overall length top to bottom edge: 15 5/8" inches
Widest Part of plate: 10 1/16" inches
Top edge of plate to middle of waist slot: 14 9/16" inches
Our Latest backplate is made from 316 Stainless Steel
Weight is roughly 2 1/2lbs for just the plate with all the cut-outs on the plate this help reduce the overall weight but still give you a very strong plate
Plate is also 3mm thick giving this backplate extra strength to handle even doubles with no problems
Has the slots on top and bottom for easy doubles set-up with the long slot
All the slots are smooth with no sharp edge to cut your webbing!
Also has plenty of accessory holes located around the plate so you can add items like our backplate ring pieces
We also have 3 holes near the top center to use your single tank adapter or if your diving doubles no problem we also have a slot near the bottom side so no more tapping your bolts to line up with the holes
Also has slots for cam straps to be used in place of a single tank adapter or if you prefer you can use an STA
Rounded edge on both sides of the plate so it does not get hung up or catch on anything
Our Latest backplate is made from Carbon Fiber forged manufacturing process making this the strongest, most durable backplate you can get plus it is super light weight!
Weight is under 1lb for just the plate!
Our forged plate is also 3mm thick giving this backplate extra strength to handle even doubles with no problems
Has the slot for easy doubles set-up
All the slots are smooth with no sharp edge to cut your webbing!
Also has plenty of accessory holes located around the plate so you can add items like our backplate ring pieces
Another piece is slots to add trim weights in 4 places to allow you to balance yourself out
We also have 3 holes near the top center to use your single tank adapter or if your diving doubles no problem we also have a slot near the bottom side so no more tapping your bolts to line up with the holes
Also has slots for cam straps to be used in place of a single tank adapter or if you prefer you can use an STA
Dimensions:
Overall length top to bottom edge: 15 5/8" inches
Widest Part of plate: 10 1/16" inches
Top edge of plate to middle of waist slot: 14 9/16" inches
You can now either select a stainless steel or a reinforced delrin cam buckle in colors to get you more of a custom look!! You will select what you want to build your own tank strap from our drop down boxes. We offer many choices to get your custom look
You can adjust the strap by the stainless steel slider by the buckle that is supplied with your buckle
Length of strap is approximately 38+ inches long
Velcro to secure your cylinder on your back of your tank
NEW! We now have color buckles in Blue, Red and Yellow! Add more color to your rig and never get confused who's rig it is on the dive boat!! Plus our standard black buckle if you want and let's not forget you can also select either of our stainless steel buckles.
Does NOT come with a removable anti-slip pad! Since many cam straps have them we did not add this and keeping your costs lower!! You can order the grip pads from our drop down box below if you need them!
You can now either select a stainless steel or a reinforced delrin cam buckle in colors to get you more of a custom look!! You will select what you want to build your own tank strap from our drop down boxes. We offer many choices to get your custom look
You can adjust the strap by the stainless steel slider by the buckle that is supplied with your buckle
Length of strap is approximately 38+ inches long
Velcro to secure your cylinder on your back of your tank
NEW! We now have color buckles in Blue, Red and Yellow! Add more color to your rig and never get confused who's rig it is on the dive boat!! Plus our standard black buckle if you want and let's not forget you can also select either of our stainless steel buckles.
Does NOT come with a removable anti-slip pad! Since many cam straps have them we did not add this and keeping your costs lower!! You can order the grip pads from our drop down box below if you need them!
We are proud to offer our newest color! Safety ORANGE.. It has taken years to find this underwater webbing with all the right features. We love adding colors to our dive rigs too make us stand out from the crowd and know our diving rig verses another diver!
This orange color is like our smb's orange color which is just the right brightness for visability when diving We use a professional grade of nylon webbing which can be used for many applications
This webbing is our Stiffer verion of our standard orange webbing and you can use this mainly for harnesses and weight belts becuase it has some flexibility but also is slightly flexible. A great webbing to use
This webbing is fits in with our stiff webbing we sell in other colors. Still is not super stiff but will allow you to build your harness and not worry about the webbing rolling on your shoulders.
Used for weight belts and other applications
Our webbing is made to be more durable for underwater use making it last longer and works better on weight belts, harnesses and backstraps and cam straps!
This webbing is design for marine use and will hold up very well with underwater use
No refund available once cut to order
Price is by the foot!
Piranha's Price: $0.99
Backplates and Single Tank Adapters
Start your backplate and wing setup here. We stock Piranha aluminum backplates in colours including green and copper, HOG stainless steel backplates, single tank adapters, 2 inch straight three slot buckles and 2 inch nylon webbing in standard stiffness in ocean blue, safety yellow, safety orange and soft pink so the plate and harness go in one order.
