Piranha is proud to offer this outstanding light at a crazy price! 

The Bludive BD40 is a high performance LED dive torch with 1800lm max output that utilizes an imported Luminus SST40 LED.

The SMO reflector emits a concentrated beam at an angle of 6 degrees. Users can switch between the 3 brightness settings, High-Low-Strobe, by pressing the stainless steel side switch..

This light is small and compact so you can hang it off your rig or store in a pocket! We also have INCLUDED a wrist loop if you wish to use it during your dive

Head Diameter: 1.45" inches 

Tube Diamter: 1.06" inches 

 Our latest dive light to arrive in and this light has the following features

* Push button to turn on / off with 3 setting High, Low and Strobe with battery indicator on the push button

**Has 6 degree tight beam angle hot spot

*** A 2 Year Warranty ** See details below 

Features:

• Luminus SST40 (maximum of 1800lm).

• Memory function: No need to cycle between the modes. The mode when powered off will set and when the flashlight is turned on again this mode will still be active (excl. Strobe mode).

• The single 21700 5000mAh Lithium battery provides a runtime of 1H54mins in High mode and 7Hrs in Low mode.

•  SMO reflector with AR coated 4mm tempered lens to provide a clear concentrated beam at 6 ° beam angle.

• The desired mode is easily selected with the stainless steel side switch and the built-in power indicator makes it easy to determine the remaining power status.

•  Water pressure resistant rating of 150 meters / 495 Feet.

• Aircraft-grade high strength aluminum material used for the body.

•  Reverse polarity protection to protect from incorrect battery installation.

• Over Discharge Protection function to automatically downshift when the battery is low to prevent over discharge.

Service & Support

We have strict quality control procedures in place to ensure you can rely 100% on our products meeting all advertised specifications and We believe that our product will give you many years of dependable service. Once you find the products have defects, please don't worry. Please follow the steps to check:

1. Inspect the battery in full charge or not;
2. Please do not dismantle or repair by yourself.
3. Please contact the local dealer or distributor for warranty support.

Please kindly note:

1. Within 15 days, free replacement. BLUDIVE Team will provide 15 days free replacement service of purchase for any manufacturing defects if problems come into being in normal use; We will replace it with the same model. If the model has been discontinued, customers will receive a product with similar or improved model.
2. Within Warranty time: Usually we provide 5 years warranty, some may provide lifetime limited warranty( for example E1). Within the warranty time, any defects please contact local dealer or distributor for warranty support. We will repair or we replace a new product for you according the defects.
3. The free warranty does not cover any damages or failure caused by:
a. Normal wear
b. Rough operation
c. Battery leakage

More questions about warranty and service, please kindly contact BLUDIVE Team in email: info@bludivegear.com

FAQ

1. How long is the warranty?
Bludive provides 2-year warranty from the purchase date for our flashlight and 1- year free exchange within 1 year for our battery, charger and other accessires.

2. If I buy from you, when will you send the product to us?
We will send you the product within 1-5 working days. When we send, we will give you the tracking No. and you could use the tracking No. check through our website or the shippment official website.

3. When the goods will arrive at my place?
Usually you will receive the goods about 7 working days --15 working days.

4. My LED falshlight could not turn on? What's wrong? How could I do?
Please do the troubleshooting as the following:
1. Check whether the insulation sheet is removed
2. Charge first, eliminate the situation that can not be charged
3. Test with the same type or compatible battery
4. The middle charge can be directly plugged in to see if the flashlight can be lit. It can be illuminated to indicate that most of the cases are battery problems. If it is not lit, it is a circuit/switch problem."
5. Please use the screwdriver to screw tightly the lock piece on the tail cap.
6. Follow the instructions to unlock
7. Wipe clean with alcohol or wipe with a dry cloth"
8. Please make sure all the connection parts have been screwed tightly, especially the flashlight body and flashlight end.

9. If could not solve it, please directly contact BLUDIVE team by email (info@bludivegear.com) to ask for help. We will reply you in a very fast time. 

FL 1 STANDARD		High	Low	Strobe
	Output	1800LM	460LM	1800LM
	RUNNING TIME	1h54mins	7Hrs	/
	BEAM INTENSITY	30,750cd	8,750cd	/
	BEAM DISTANCE	1152ft 351m	614ft 187m	1152ft 351m
	IMPACT DISTANCE	1.5 m
	WATERPROOF	IPX-8(150 meters underwater)
	LED	Luminus SST40*1
	Battery	1*21700 Li-ion Lithium
	Button	Stainless Steel Side Switch
	Net Weight	5.07oz/144g(battery excluded)
	Size	5.89"(Length)*1.45"(Head)*1.06"(Tube) 149.5(Length)*37(Head)*27(Tube)mm
	Inside the Box	1*BD40 flashligh,1*21700 Li-batter(5000mAh),1*charger(ZL11),1*Diving lanyard,1*user manual,3*O-rings