Featured Items | Piranha Dive - pg. 6 including 3 Inch Stainless Steel Carabiner w/ Yellow 3 1/2 inch Webbing Loop

These are great for use on your corrugated hose to help your inflator and other items or hoses

have a clean routing plus not flapping around loosely

Item Description:

- technical scuba diving BCD backpack snorkel keeper elastic rubber loop and you can use on your corragated hose to help route and keep your hoses tight and not flapping around

- Perfect for use on your corrugated hose to secure your inflator and other hoses and other purposes

- Easy and convenient to use

- Strong stretchable, lightweight, corrosion-resistant, wear-resistant, durable and portable

-The loops have some strength but just a little to better hold your items tight to your harness rig

Specification:

- Diameter: Approx. 40 mm /1.57" inch // Almost 1/2" wide

- Color: Black

Note:

Only the rubber loop, other accessories are not included.

Sold by the piece!

DO NOT OVER STRETCH THESE LOOPS! They stretch roughly about 20% of their diameter

**Want a folding knife that is small and compact but will not rust on you? Well check out our new little pocket folding knife!

**Our knife has a smooth edge front blade on the upper half of the knife for quick cutting

**Bottom half has a serrated edge on the front side

**This knife also has a line cutter on the backside for making an faster cut on line or rope!

**This knife has a black coated stainless steel blade so you know storing it in a pocket is not an issue if you forget to wash it off! This helps reduce any rust formations

**Also have a lanyard with a barrel slide lock to adjust your fit arounf your wrist

Dimensions:

Close overall length: 4 3/4" inches

Open overall Length: 8 3/8" inches

Blade length overall: 3 1/4" inches

**Want a folding knife that is small and compact but will not rust on you? Well check out our new little pocket folding knife!

**Our knife has a smooth edge front blade on the upper half of the knife for quick cutting

**Bottom half has a serrated edge on the front side

**This knife also has a line cutter on the backside for making an faster cut on line or rope!

**This knife has a black coated stainless steel blade so you know storing it in a pocket is not an issue if you forget to wash it off! This helps reduce any rust formations

**Also have a lanyard with a barrel slide lock to adjust your fit arounf your wrist

Dimensions:

Close overall length: 4 3/4" inches

Open overall Length: 8 3/8" inches

Blade length overall: 3 1/4" inches

* This bag is protective and durable

* Velcro closure on the front side keeps your mask inside the pocket secure and we have a mesh rear pocket for holding slates, cards other smaller items with a velcro closure

* Has a small pocket on the side to hold your sea drops, sea bluff or even place your keys to hold in a safe place. Included with this mask pocket is a 2oz Trident mask defog bottle!

* Also has a small plastic snap located on the backside to hang or clip this mask case in a safe place

* Made out of a heavy duty cordura so it will lasts for a long time

This is the only FDA aprroved for over the counter medicine for lionfish or jellyfish stings. This treats the pain from their stings

This is a 1oz jar

Apply per directions

Treats pain from lionfish or jellyfish stings plus any aquatec animal stings

Odorless and non-greasy

Reliefs pain almost immediately from their stings!

This is really a must have for any dive kit if your diving in the oceans!! Not diving just going to the beach? Take this jar and make sure your family if stung is not in pain

So if you need a nice small and compact light at a Piranha price come check these lights out with their 2 year warranty you may want to look these over!!

Bludive BD10 is a palm-sized diving light with a mechanically rotary switch.

The rotary switch offers high reliability underwater. Using the 1*OSRAM led, its max output can reach 1200 lumens, meanwhile the 6000K LED color temperature provides superb color rendition.

Powered by 1*21700Lithmiun battery, its max runtime can reach 2 H10mins. Plus robust water pressure resistant construction, high portability and easy operation, BD10 would be qualified for both recreational diving as a primary light and deep diving as a backup light.

This light is small and compact so you can hang it off your rig or store in a pocket! We also have INCLUDED a wrist loop if you wish to use it during your dive

Length: 5.43" inches long

Head Diameter: 1.45" inches

Tube Diameter: 1.06" inch

Features:

• Utilized 1*OSRAM led, Max 1200lm Output

• SMO reflector and AR coated 4mm tempered lens, offer a clear concentrated beam at 7 degrees

• Compatible with 1*21700 5000mAh Lithium battery, provide high mode with 2H10mins, Medium mode 4H10mins.

• Mechanically Rotary switch, which offers high reliability underwater.

• Two brightness settings, qualified as a primary light for recreational divers or as a backup light for technical divers

• Water pressure resistant construction, depth rated to 150 meters / 495 Feet

• Aircraft-grade high strength aluminum material

• Reverse polarity protection, to protect from improper battery installation

  FL 1 STANDARD		High	Low
  	Output	1200LM	400LM
  	RUNNING TIME	2h10mins	4h10mins
  	BEAM INTENSITY	17,600cd	6,880cd
  	BEAM DISTANCE	869ft 265m	545ft 166m
  	IMPACT DISTANCE	1.5 m
  	WATERPROOF	150m Underwater
  	LED	1 pce OSRAM LED
  	Battery	1 pce 21700 Battery
  	Button	Mechanically Rotary Button
  	Net Weight	4.5oz/128g
  	Size	5.43'(length)*1.45'(head)*1.06'(tube) inch 138(length)*37(head)*27(tube)mm
  	Inside the Box	1*BD10 dive flashlight, 1*Diving Lanyard, 3*Orings, 1 *manual, 1*21700 5000mAh Lithium battery, 1* 21700 charger

  Service & Support

  We have strict quality control procedures in place to ensure you can rely 100% on our products meeting all advertised specifications and We believe that our product will give you many years of dependable service. Once you find the products have defects, please don't worry. Please follow the steps to check:
  
  1. Inspect the battery in full charge or not;
  2. Please do not dismantle or repair by yourself.
  3. Please contact the local dealer or distributor for warranty support.
  
  Please kindly note:
  
  1. Within 15 days, free replacement. BLUDIVE Team will provide 15 days free replacement service of purchase for any manufacturing defects if problems come into being in normal use; We will replace it with the same model. If the model has been discontinued, customers will receive a product with similar or improved model.
  2. Within Warranty time: Usually we provide 5 years warranty, some may provide lifetime limited warranty( for example E1). Within the warranty time, any defects please contact local dealer or distributor for warranty support. We will repair or we replace a new product for you according the defects.
  3. The free warranty does not cover any damages or failure caused by:
  a. Normal wear
  b. Rough operation
  c. Battery leakage
  
  More questions about warranty and service, please kindly contact BLUDIVE Team in email: info@bludivegear.com

  FAQ

  1. How long is the warranty?
  Bludive provides 2-year warranty from the purchase date for our flashlight and 1- year free exchange within 1 year for our battery, charger and other accessires.
  
  2. If I buy from you, when will you send the product to us?
  We will send you the product within 1-5 working days. When we send, we will give you the tracking No. and you could use the tracking No. check through our website or the shippment official website.
  
  3. When the goods will arrive at my place?
  Usually you will receive the goods about 7 working days --15 working days.
  
  4. My LED falshlight could not turn on? What's wrong? How could I do?
  Please do the troubleshooting as the following:
  1. Check whether the insulation sheet is removed
  2. Charge first, eliminate the situation that can not be charged
  3. Test with the same type or compatible battery
  4. The middle charge can be directly plugged in to see if the flashlight can be lit. It can be illuminated to indicate that most of the cases are battery problems. If it is not lit, it is a circuit/switch problem."
  5. Please use the screwdriver to screw tightly the lock piece on the tail cap.
  6. Follow the instructions to unlock
  7. Wipe clean with alcohol or wipe with a dry cloth"
  8. Please make sure all the connection parts have been screwed tightly, especially the flashlight body and flashlight end.
  9. If could not solve it, please directly contact BLUDIVE team by email (info@bludivegear.com) to ask for help. We will reply you in a very fast time.

  

  
  

Piranha is proud to offer this outstanding light at a crazy price!

The Bludive BD40 is a high performance LED dive torch with 1800lm max output that utilizes an imported Luminus SST40 LED.

The SMO reflector emits a concentrated beam at an angle of 6 degrees. Users can switch between the 3 brightness settings, High-Low-Strobe, by pressing the stainless steel side switch..

This light is small and compact so you can hang it off your rig or store in a pocket! We also have INCLUDED a wrist loop if you wish to use it during your dive

Head Diameter: 1.45" inches

Tube Diamter: 1.06" inches

Our latest dive light to arrive in and this light has the following features

* Push button to turn on / off with 3 setting High, Low and Strobe with battery indicator on the push button

**Has 6 degree tight beam angle hot spot

*** A 2 Year Warranty ** See details below

Features:

• Luminus SST40 (maximum of 1800lm).

• Memory function: No need to cycle between the modes. The mode when powered off will set and when the flashlight is turned on again this mode will still be active (excl. Strobe mode).

• The single 21700 5000mAh Lithium battery provides a runtime of 1H54mins in High mode and 7Hrs in Low mode.

• SMO reflector with AR coated 4mm tempered lens to provide a clear concentrated beam at 6 ? beam angle.

• The desired mode is easily selected with the stainless steel side switch and the built-in power indicator makes it easy to determine the remaining power status.

• Water pressure resistant rating of 150 meters / 495 Feet.

• Aircraft-grade high strength aluminum material used for the body.

• Reverse polarity protection to protect from incorrect battery installation.

• Over Discharge Protection function to automatically downshift when the battery is low to prevent over discharge.

Service & Support

We have strict quality control procedures in place to ensure you can rely 100% on our products meeting all advertised specifications and We believe that our product will give you many years of dependable service. Once you find the products have defects, please don't worry. Please follow the steps to check:

1. Inspect the battery in full charge or not;
2. Please do not dismantle or repair by yourself.
3. Please contact the local dealer or distributor for warranty support.

Please kindly note:

1. Within 15 days, free replacement. BLUDIVE Team will provide 15 days free replacement service of purchase for any manufacturing defects if problems come into being in normal use; We will replace it with the same model. If the model has been discontinued, customers will receive a product with similar or improved model.
2. Within Warranty time: Usually we provide 5 years warranty, some may provide lifetime limited warranty( for example E1). Within the warranty time, any defects please contact local dealer or distributor for warranty support. We will repair or we replace a new product for you according the defects.
3. The free warranty does not cover any damages or failure caused by:
a. Normal wear
b. Rough operation
c. Battery leakage

More questions about warranty and service, please kindly contact BLUDIVE Team in email: info@bludivegear.com

FAQ

1. How long is the warranty?
Bludive provides 2-year warranty from the purchase date for our flashlight and 1- year free exchange within 1 year for our battery, charger and other accessires.

2. If I buy from you, when will you send the product to us?
We will send you the product within 1-5 working days. When we send, we will give you the tracking No. and you could use the tracking No. check through our website or the shippment official website.

3. When the goods will arrive at my place?
Usually you will receive the goods about 7 working days --15 working days.

4. My LED falshlight could not turn on? What's wrong? How could I do?
Please do the troubleshooting as the following:
1. Check whether the insulation sheet is removed
2. Charge first, eliminate the situation that can not be charged
3. Test with the same type or compatible battery
4. The middle charge can be directly plugged in to see if the flashlight can be lit. It can be illuminated to indicate that most of the cases are battery problems. If it is not lit, it is a circuit/switch problem."
5. Please use the screwdriver to screw tightly the lock piece on the tail cap.
6. Follow the instructions to unlock
7. Wipe clean with alcohol or wipe with a dry cloth"
8. Please make sure all the connection parts have been screwed tightly, especially the flashlight body and flashlight end.

9. If could not solve it, please directly contact BLUDIVE team by email (info@bludivegear.com) to ask for help. We will reply you in a very fast time.

FL 1 STANDARD		High	Low	Strobe
	Output	1800LM	460LM	1800LM
	RUNNING TIME	1h54mins	7Hrs	/
	BEAM INTENSITY	30,750cd	8,750cd	/
	BEAM DISTANCE	1152ft 351m	614ft 187m	1152ft 351m
	IMPACT DISTANCE	1.5 m
	WATERPROOF	IPX-8(150 meters underwater)
	LED	Luminus SST40*1
	Battery	1*21700 Li-ion Lithium
	Button	Stainless Steel Side Switch
	Net Weight	5.07oz/144g(battery excluded)
	Size	5.89"(Length)*1.45"(Head)*1.06"(Tube) 149.5(Length)*37(Head)*27(Tube)mm
	Inside the Box	1*BD40 flashligh,1*21700 Li-batter(5000mAh),1*charger(ZL11),1*Diving lanyard,1*user manual,3*O-rings

So we make these out of a heavy 3/16 gauge rod to give you strength when putting the larger fish on them

The overall length end to end is roughly 19" inches but the loop is 17" inches for where the fist will be placed on

So you need to carry different items and need a place to store them during your dive? We got it for you

This pocket has two front pockets with heavy duty zippers!

The zippers have pull tabs so even with gloves you can open with ease!

A third zipper allows you to open the pocket even wider if you need too and expands it open by over 3" inches wide!

The larger rear pocket is roughly 11" inches long X 7 1/2" tall and can be open to over 3" inches wide!

The smaller front pocket has 2 grometed drain holes and is roughly: 10 1/4" inches long X 6" inches tall

The back has 2 4" inch stainless steel double enders to connect your pocket to you or just use the 1" inch stainless steel d=rings and connect by your method.

You also have a velcro closure on the backside that holds your double enders when not in use or during a dive you can also store smaller items in there

The Material is made from a heavy duty: 1000D nylon with PU coating giving you one tough pocket that will last you during even your harsh dives

Here is a backplate pad all set to be mount to your backplate! Comes complete with mounting screws and this pad has an inner sleeve to hold your smb or liftbag!

This design will fit most aluminum and stainless backplates!

NOTE: This will not fit the dog bone stlye backplate!!

Material:1680D nylon with PU coating to give you a long lasting backpad!

• Great way to be prepared for minor injuries
• Immediate solutions for any marine life bite or sting
• This kit is vital if you are hunting Lionfish
• Contains commonly needed creams and ointments
• Includes a water resistant clam shell case

Rubber Spearfishing Shock Cord with two ended line Shockcord for Avoiding Losing Catch

Feature:

1. High Strength and Durability: The tightly woven 2mm shock cord exhibits exceptional strength, ensuring reliable performance even under intense pressure. Spearfishing shock cord's sturdy construction makes it resistant to wear and tear, ensuring a long lifespan.

2. Lightweight Design: The speargun shock cord is lightweight, allowing for easy handling and maneuverability. It adds minimal bulk to the speargun setup, enhancing overall convenience during diving or spearfishing activities.

3. Excellent Resistance Properties: The spear bungee is resistant to acids, alkalis, and UV radiation, making it suitable for use in various environmental conditions. It can withstand exposure to harsh elements, ensuring optimal performance and longevity.

4. Superior Elasticity: With a natural latex tube, the spear shock cord exhibits strong resilience and excellent stretchability. It can absorb and release energy efficiently, providing a powerful recoil when needed and enhancing the accuracy and effectiveness of shots.

5. Water and Aging Resistance: The spear shockcord's natural latex tube is highly resistant to saltwater, ensuring it remains functional and durable even in marine environments. Additionally, it possesses excellent resistance to aging, maintaining its performance over time without significant degradation.

• This Shock Cord is a must have for spear fisherman. This invaluable cord can save you the frustration of losing your catch, your shaft, or breaking your line.
• The Bungee Shock Cord is designed to use with Spearguns that keeps the line tight when the gun is loaded.
• The Shock Cord is made using an Elastic Bungee with a Dyneema cord for ensure resistance and long lasting use.
• The Bungee is a Latex Hollow Tubing that can elongates Up-to-Three times its original length.

• Our Shock Cord is a must have for spear fisherman. This invaluable cord can save you the frustration of losing your catch, your shaft, or breaking your line.
• This Bungee Shock Cord is designed to use with Spearguns that keeps the line tight when the gun is loaded.
• The Shock Cord is made using an Elastic Bungee with a Dyneema cord for ensure resistance and long lasting use.
• The Bungee is a Latex Hollow Tubing that can elongates Up-to-Three times its original length.

Rubber Spearfishing Shock Cord with two ended line Shockcord for Avoiding Losing Catch

Feature:

1. High Strength and Durability: The tightly woven 2mm shock cord exhibits exceptional strength, ensuring reliable performance even under intense pressure. Spearfishing shock cord's sturdy construction makes it resistant to wear and tear, ensuring a long lifespan.

2. Lightweight Design: The speargun shock cord is lightweight, allowing for easy handling and maneuverability. It adds minimal bulk to the speargun setup, enhancing overall convenience during diving or spearfishing activities.

3. Excellent Resistance Properties: The spear bungee is resistant to acids, alkalis, and UV radiation, making it suitable for use in various environmental conditions. It can withstand exposure to harsh elements, ensuring optimal performance and longevity.

4. Superior Elasticity: With a natural latex tube, the spear shock cord exhibits strong resilience and excellent stretchability. It can absorb and release energy efficiently, providing a powerful recoil when needed and enhancing the accuracy and effectiveness of shots.

5. Water and Aging Resistance: The spear shockcord's natural latex tube is highly resistant to saltwater, ensuring it remains functional and durable even in marine environments. Additionally, it possesses excellent resistance to aging, maintaining its performance over time without significant degradation.

• This Shock Cord is a must have for spear fisherman. This invaluable cord can save you the frustration of losing your catch, your shaft, or breaking your line.
• The Bungee Shock Cord is designed to use with Spearguns that keeps the line tight when the gun is loaded.
• The Shock Cord is made using an Elastic Bungee with a Dyneema cord for ensure resistance and long lasting use.
• The Bungee is a Latex Hollow Tubing that can elongates Up-to-Three times its original length.

• Our Shock Cord is a must have for spear fisherman. This invaluable cord can save you the frustration of losing your catch, your shaft, or breaking your line.
• This Bungee Shock Cord is designed to use with Spearguns that keeps the line tight when the gun is loaded.
• The Shock Cord is made using an Elastic Bungee with a Dyneema cord for ensure resistance and long lasting use.
• The Bungee is a Latex Hollow Tubing that can elongates Up-to-Three times its original length.

Rubber Spearfishing Shock Cord with two ended line Shockcord for Avoiding Losing Catch

Feature:

1. High Strength and Durability: The tightly woven 2mm shock cord exhibits exceptional strength, ensuring reliable performance even under intense pressure. Spearfishing shock cord's sturdy construction makes it resistant to wear and tear, ensuring a long lifespan.

2. Lightweight Design: The speargun shock cord is lightweight, allowing for easy handling and maneuverability. It adds minimal bulk to the speargun setup, enhancing overall convenience during diving or spearfishing activities.

3. Excellent Resistance Properties: The spear bungee is resistant to acids, alkalis, and UV radiation, making it suitable for use in various environmental conditions. It can withstand exposure to harsh elements, ensuring optimal performance and longevity.

4. Superior Elasticity: With a natural latex tube, the spear shock cord exhibits strong resilience and excellent stretchability. It can absorb and release energy efficiently, providing a powerful recoil when needed and enhancing the accuracy and effectiveness of shots.

5. Water and Aging Resistance: The spear shockcord's natural latex tube is highly resistant to saltwater, ensuring it remains functional and durable even in marine environments. Additionally, it possesses excellent resistance to aging, maintaining its performance over time without significant degradation.

• This Shock Cord is a must have for spear fisherman. This invaluable cord can save you the frustration of losing your catch, your shaft, or breaking your line.
• The Bungee Shock Cord is designed to use with Spearguns that keeps the line tight when the gun is loaded.
• The Shock Cord is made using an Elastic Bungee with a Dyneema cord for ensure resistance and long lasting use.
• The Bungee is a Latex Hollow Tubing that can elongates Up-to-Three times its original length.

• Our Shock Cord is a must have for spear fisherman. This invaluable cord can save you the frustration of losing your catch, your shaft, or breaking your line.
• This Bungee Shock Cord is designed to use with Spearguns that keeps the line tight when the gun is loaded.
• The Shock Cord is made using an Elastic Bungee with a Dyneema cord for ensure resistance and long lasting use.
• The Bungee is a Latex Hollow Tubing that can elongates Up-to-Three times its original length.

Our latest single lens low volume masks is perfect for diving or if you need a back-up but do not want to spend a ton of money take a look at these. Get these at a Piranha price!!

Our Diving Masks: Provides a 180? Panoramic view for your underwater adventure, allowing you to see all underwater creatures, crystal clear.

These fit a medium to large face!

This mask is fully adjustable to fit perfectly on any face and keep water out.

The Temper Glass Lens we use is:diving mask used ultra-clear no-tint glass,providing you a crystal clear view to discover the vibrant fish life and delicate coral under the sea or diving a wreck or cave. The inner surface of the tempered lens is coated with an anti-fog coating, providing you with crystal-clear vision and does not distort your view underwater,to discover the vibrant fish life and delicate corals on the ocean floor. Also Note it is CE Approved

*Food-Grade Liquid Silicone* The skirt of our dive mask is made out of made of a food-grade high-quality liquid silicone, comfortable silicone edge fits your face perfectly without any gap to let water leak in. With ergonomic design for maximum fit with different face shapes, more comfortable to wear for even the lonest dives. You can wear this mask without leaving any red marks on their face, thanks to its super soft and liquid silicone material that is used. It won't make your face allergic, and it's easy to clean after use!

**Adjustable Design* * Our dive mask have an adjustable strap that the press-and-fit buttons on both sides make the strap easy to be adjusted without too much strength. And it is a one-way tightening buckle on both sides of the strap, this clever feature prevents any accidental loosening, ensuring a secure fit even in extreme diving situations. The adjustment strap is also made of soft silicone, which is comfortable but not tight, widened design relieves the pressure on the back of the head while diving.

Want a mask box? Just order one from our drop down box

Our latest single lens low volume masks is perfect for diving or if you need a back-up but do not want to spend a ton of money take a look at these. Get these at a Piranha price!!

Our Diving Masks: Provides a 180? Panoramic view for your underwater adventure, allowing you to see all underwater creatures, crystal clear.

These fit a medium to large face!

This mask is fully adjustable to fit perfectly on any face and keep water out.

The Temper Glass Lens we use is:diving mask used ultra-clear no-tint glass,providing you a crystal clear view to discover the vibrant fish life and delicate coral under the sea or diving a wreck or cave. The inner surface of the tempered lens is coated with an anti-fog coating, providing you with crystal-clear vision and does not distort your view underwater,to discover the vibrant fish life and delicate corals on the ocean floor. Also Note it is CE Approved

*Food-Grade Liquid Silicone* The skirt of our dive mask is made out of made of a food-grade high-quality liquid silicone, comfortable silicone edge fits your face perfectly without any gap to let water leak in. With ergonomic design for maximum fit with different face shapes, more comfortable to wear for even the lonest dives. You can wear this mask without leaving any red marks on their face, thanks to its super soft and liquid silicone material that is used. It won't make your face allergic, and it's easy to clean after use!

**Adjustable Design* * Our dive mask have an adjustable strap that the press-and-fit buttons on both sides make the strap easy to be adjusted without too much strength. And it is a one-way tightening buckle on both sides of the strap, this clever feature prevents any accidental loosening, ensuring a secure fit even in extreme diving situations. The adjustment strap is also made of soft silicone, which is comfortable but not tight, widened design relieves the pressure on the back of the head while diving.

Want a mask box? Just order one from our drop down box

Our latest single lens low volume masks is perfect for diving or if you need a back-up but do not want to spend a ton of money take a look at these. Get these at a Piranha price!!

Our Diving Masks: Provides a 180? Panoramic view for your underwater adventure, allowing you to see all underwater creatures, crystal clear.

These fit a medium to large face!

This mask is fully adjustable to fit perfectly on any face and keep water out.

The Temper Glass Lens we use is:diving mask used ultra-clear no-tint glass,providing you a crystal clear view to discover the vibrant fish life and delicate coral under the sea or diving a wreck or cave. The inner surface of the tempered lens is coated with an anti-fog coating, providing you with crystal-clear vision and does not distort your view underwater,to discover the vibrant fish life and delicate corals on the ocean floor. Also Note it is CE Approved

*Food-Grade Liquid Silicone* The skirt of our dive mask is made out of made of a food-grade high-quality liquid silicone, comfortable silicone edge fits your face perfectly without any gap to let water leak in. With ergonomic design for maximum fit with different face shapes, more comfortable to wear for even the lonest dives. You can wear this mask without leaving any red marks on their face, thanks to its super soft and liquid silicone material that is used. It won't make your face allergic, and it's easy to clean after use!

**Adjustable Design* * Our dive mask have an adjustable strap that the press-and-fit buttons on both sides make the strap easy to be adjusted without too much strength. And it is a one-way tightening buckle on both sides of the strap, this clever feature prevents any accidental loosening, ensuring a secure fit even in extreme diving situations. The adjustment strap is also made of soft silicone, which is comfortable but not tight, widened design relieves the pressure on the back of the head while diving.

Want a mask box? Just order one from our drop down box

So you now are bringing in a very comfortable shirt version of our Black Piranha Logo

We also offer these at a great price unlike other companies want you to pay an arm and leg we don't! We want you to show off our great looking logo and stand out from the pack with one of our shirts knowing just like Piranha you got a great shirt at a Piranha price!!

The color being a Grey Sports

This shirt uses a core blend of 50% cotton and 50% polyester giving it soft feel and great wearablility. Give it a try you will not be disappointed

Our Shirts do not shink after wahing and drying them in a dryer

We also have a small front side logo with a larger backside logo!

We now also use a special vinyl logo that holds up even better yet is not hot on your back from the logo.. Try it out to see our comfortable wearing t-shirt we have ever had made. These are an awesome looking shirt and wear very nice and washing them gets them to get a little softer yet keeps your logo looking great!!

Wash Instructions for best results!

Always turn your shirt inside out since doing this allows the vinyl with our logo to stay fresh looking!!

So you now are bringing in a very comfortable shirt version of our Black Piranha Logo

We also offer these at a great price unlike other companies want you to pay an arm and leg we don't! We want you to show off our great looking logo and stand out from the pack with one of our shirts knowing just like Piranha you got a great shirt at a Piranha price!!

The color being a Grey Sports

This shirt uses a core blend of 50% cotton and 50% polyester giving it soft feel and great wearablility. Give it a try you will not be disappointed

Our Shirts do not shink after wahing and drying them in a dryer

We also have a small front side logo with a larger backside logo!

We now also use a special vinyl logo that holds up even better yet is not hot on your back from the logo.. Try it out to see our comfortable wearing t-shirt we have ever had made. These are an awesome looking shirt and wear very nice and washing them gets them to get a little softer yet keeps your logo looking great!!

Wash Instructions for best results!

Always turn your shirt inside out since doing this allows the vinyl with our logo to stay fresh looking!!

So you now are bringing in a very comfortable shirt version of our Black Piranha Logo

We also offer these at a great price unlike other companies want you to pay an arm and leg we don't! We want you to show off our great looking logo and stand out from the pack with one of our shirts knowing just like Piranha you got a great shirt at a Piranha price!!

The color being a Grey Sports

This shirt uses a core blend of 50% cotton and 50% polyester giving it soft feel and great wearablility. Give it a try you will not be disappointed

Our Shirts do not shink after wahing and drying them in a dryer

We also have a small front side logo with a larger backside logo!

We now also use a special vinyl logo that holds up even better yet is not hot on your back from the logo.. Try it out to see our comfortable wearing t-shirt we have ever had made. These are an awesome looking shirt and wear very nice and washing them gets them to get a little softer yet keeps your logo looking great!!

Wash Instructions for best results!

Always turn your shirt inside out since doing this allows the vinyl with our logo to stay fresh looking!!

So you now are bringing in a very comfortable shirt version of our Black Piranha Logo

We also offer these at a great price unlike other companies want you to pay an arm and leg we don't! We want you to show off our great looking logo and stand out from the pack with one of our shirts knowing just like Piranha you got a great shirt at a Piranha price!!

The color being a Grey Sports

This shirt uses a core blend of 50% cotton and 50% polyester giving it soft feel and great wearablility. Give it a try you will not be disappointed

Our Shirts do not shink after wahing and drying them in a dryer

We also have a small front side logo with a larger backside logo!

We now also use a special vinyl logo that holds up even better yet is not hot on your back from the logo.. Try it out to see our comfortable wearing t-shirt we have ever had made. These are an awesome looking shirt and wear very nice and washing them gets them to get a little softer yet keeps your logo looking great!!

Wash Instructions for best results!

Always turn your shirt inside out since doing this allows the vinyl with our logo to stay fresh looking!!

So you now are bringing in a very comfortable shirt version of our Black Piranha Logo

We also offer these at a great price unlike other companies want you to pay an arm and leg we don't! We want you to show off our great looking logo and stand out from the pack with one of our shirts knowing just like Piranha you got a great shirt at a Piranha price!!

The color being a Grey Sports

This shirt uses a core blend of 50% cotton and 50% polyester giving it soft feel and great wearablility. Give it a try you will not be disappointed

Our Shirts do not shink after wahing and drying them in a dryer

We also have a small front side logo with a larger backside logo!

We now also use a special vinyl logo that holds up even better yet is not hot on your back from the logo.. Try it out to see our comfortable wearing t-shirt we have ever had made. These are an awesome looking shirt and wear very nice and washing them gets them to get a little softer yet keeps your logo looking great!!

Wash Instructions for best results!

Always turn your shirt inside out since doing this allows the vinyl with our logo to stay fresh looking!!

We have our nestest D-Rings which are light weight aluminium D-rings

These are in a 6mm diameter size

These are straight with an open gap to allow you to quickly slide it through your webbing onto your rig when using our slip on hardware. You can purchase this tri-glide following thelink here if you wish:

https://www.piranhadivemfg.com/item/Slip-on-Webbing-Tri-Glide-w-Bungee-or-Latex-Tubing-Holes-15382

Add Color with these awesome anodized d-rings

Don't be fooled these are still strong enough to hold anything you wish to clip off to with no issues even with the gap you will not have any problems with weight on them unless your moving a truck! Just kidding but they really are very strong and you will pull threading out before these bend out

And yes you can use these even if your not sliding them through your webbing just using a standard tri-glider "slider" to mount these on

We have our nestest D-Rings which are light weight aluminium D-rings

These are in a 6mm diameter size

These are straight with an open gap to allow you to quickly slide it through your webbing onto your rig when using our slip on hardware. You can purchase this tri-glide following thelink here if you wish:

https://www.piranhadivemfg.com/item/Slip-on-Webbing-Tri-Glide-w-Bungee-or-Latex-Tubing-Holes-15382

Add Color with these awesome anodized d-rings

Don't be fooled these are still strong enough to hold anything you wish to clip off to with no issues even with the gap you will not have any problems with weight on them unless your moving a truck! Just kidding but they really are very strong and you will pull threading out before these bend out

And yes you can use these even if your not sliding them through your webbing just using a standard tri-glider "slider" to mount these on

We have our nestest D-Rings which are light weight aluminium D-rings

These are in a 6mm diameter size

These are straight with an open gap to allow you to quickly slide it through your webbing onto your rig when using our slip on hardware. You can purchase this tri-glide following thelink here if you wish:

https://www.piranhadivemfg.com/item/Slip-on-Webbing-Tri-Glide-w-Bungee-or-Latex-Tubing-Holes-15382

Add Color with these awesome anodized d-rings

Don't be fooled these are still strong enough to hold anything you wish to clip off to with no issues even with the gap you will not have any problems with weight on them unless your moving a truck! Just kidding but they really are very strong and you will pull threading out before these bend out

And yes you can use these even if your not sliding them through your webbing just using a standard tri-glider "slider" to mount these on

We have our nestest D-Rings which are light weight aluminium D-rings

These are in a 6mm diameter size

These are straight with an open gap to allow you to quickly slide it through your webbing onto your rig when using our slip on hardware. You can purchase this tri-glide following thelink here if you wish:

https://www.piranhadivemfg.com/item/Slip-on-Webbing-Tri-Glide-w-Bungee-or-Latex-Tubing-Holes-15382

Add Color with these awesome anodized d-rings

Don't be fooled these are still strong enough to hold anything you wish to clip off to with no issues even with the gap you will not have any problems with weight on them unless your moving a truck! Just kidding but they really are very strong and you will pull threading out before these bend out

And yes you can use these even if your not sliding them through your webbing just using a standard tri-glider "slider" to mount these on

We have our nestest D-Rings which are light weight aluminium D-rings

These are in a 6mm diameter size

These are straight with an open gap to allow you to quickly slide it through your webbing onto your rig when using our slip on hardware. You can purchase this tri-glide following thelink here if you wish:

https://www.piranhadivemfg.com/item/Slip-on-Webbing-Tri-Glide-w-Bungee-or-Latex-Tubing-Holes-15382

Add Color with these awesome anodized d-rings

Don't be fooled these are still strong enough to hold anything you wish to clip off to with no issues even with the gap you will not have any problems with weight on them unless your moving a truck! Just kidding but they really are very strong and you will pull threading out before these bend out

And yes you can use these even if your not sliding them through your webbing just using a standard tri-glider "slider" to mount these on

We have our nestest D-Rings which are light weight aluminium D-rings

These are in a 6mm diameter size

These are straight with an open gap to allow you to quickly slide it through your webbing onto your rig when using our slip on hardware. You can purchase this tri-glide following thelink here if you wish:

https://www.piranhadivemfg.com/item/Slip-on-Webbing-Tri-Glide-w-Bungee-or-Latex-Tubing-Holes-15382

Add Color with these awesome anodized d-rings

Don't be fooled these are still strong enough to hold anything you wish to clip off to with no issues even with the gap you will not have any problems with weight on them unless your moving a truck! Just kidding but they really are very strong and you will pull threading out before these bend out

And yes you can use these even if your not sliding them through your webbing just using a standard tri-glider "slider" to mount these on

With Lionfish becoming an ever increasing problem around the globe and in some parts of the U.S.,

The chances of being stung weather your out hunting them or just enjoying diving around reefs. You may want to carry this kit just in case you or someone you are diving with gets stung. .

The Dive 1st Air Kit comes in a water resistant clam shell case and is packed with all the supplies you need to neutralize the sting of a lionfish, Our kit has as mostly everything you may need to clean and care for the wound. Included in this kit are items like band aids, gauze wraps, elastic wraps, forceps, scissors, gloves, instant hot packs, razors, sterile solution for irrigation, hydrocortisone cream, triple antibiotic ointment, and more.

The Dive 1st Aid Lionfish Sting Kit is a must for any diver who may find themselves diving in Lionfish territory.

• For almost any marine life bite or sting you may get during your dive
• Carry this kit when you are hunting Lionfish!
• Contains commonly needed creams and ointments to relief strings
• Includes a water resistant Red Dive 1st Aid clam shell case { 8 x 5 x 3 in | 20.3 x 12.7 x 7.62 cm }

So we built a d-ring to mount onto almost any backplate! How you ask? Well we made one of the holes fixed so your d-ring stays located in the same area and then we made a 2 1/4" long slot so no matter where you mount it and on any of the different made backplates you can secure the bottom hardware by sliding it to match up with another hole in your backplate!!

We also made this d-ring just a little larger then normal to make sure you can find it with ease on the side of your plate! Ir reaces out 1 5/8" inches measuring the inside of the D

We also supply all the needed 3/8"-16 stainless steel hardware and use a nylon insert lock nut to hold it tightly to your plate. Our kit includes:

1 Backplate D-Ring ** 304 marine grade stainless

2 7/32 Hex Head button cap screw **316SS

* You need a 7/32 Allen Head Tool for this bolt

2 Nylon insert lock nut **316SS

4 Washers **316SS

Overall Measurements:

3 1/2" inches long

2 5/8" inches wide

1/4" thick

1 5/8" inside D measurement

Slot Measurement: Middle of fixed hole to shortest to furtherest slot length: 15/16" to 3" inches

Your backplate D-Ring has been tumbed for at least 48 hours giving it a smooth finish with no sarpe edges

If you want your D-ring slightly bent select from our drop down box below and make sure to read to know how the bend will be facing

* Example: If you select the fixed hole on the top and you want your D-ring slightly bent forward it means your bend is slightly in front of your backplate hardware and if bent backwards it would mean your bend is slightly behind where you mount it...

So for those of you wanting a 4 slot 2" inch which slider with no teeth here you go!

Many folks use the center area using a d-ring or other hardware depending on their rig set-up

This is made from our 304 marine grade stainless steel to reduce rust formation on the surface

1/4" inch thick material gives it added strength

1 13/16" inches loverall length 2 3/8 overall width wide

We also have these tumbled for 48 hours giving you a smooth surface so not to hurt your webbing

Made here in the good ole Usa!

Our Latest knife comes in a stainless steel "4CR13-SS" body with black protective coating which allows this perfect size knife to have good durability plus red removable handles.

The 4CR13 steel blade has excellent edge retention, corrosion resistance, and wear resistance, making it an ideal choice for slicing cutting in those times you need a knife

This knife can be carried with you. No matter where you go, it can easily be placed in any pocket or with its elestic leg straps you can mount this knife almost anywhere you want on you or your diving rig. It is both simple and convenient to mount and use.

Has a smooth cutting edge on the front side with a line cutter located just below the smooth cutting edge. Also has cutting serrations on the backside

This knife also has a small hole near the backend so you can add bungee to use on your wrist when using the knife so not to lose it

Blunt tip give you a knife to pry around items to get a better look at them

Also if you need a bottle opener well this knife as one just in case you get thirsty on the top side with no opener

Comes with a red metal covering just to give it a little look plus you will see a small hex head slot

Specifications

Overall All Length" 7 1/2" inches

Material: stainless steel "4CR13-SS"

Weight: 105g / 3.7oz

Smooth cutting edge: 2 3/4" inches

Serrated Edge: 1 3/4" inches

Description:

- Made out of a premium marine grade 316 stainless steel for diving use on backplates pads and other scuba uses. These are1 piece and male and female end you are purchasing. The flat bottom allows for a better fit when securing items on to your rig

- These Lightweight, strong, sturdy, high strength and corrosion resistant in saltwater circumstance

- Used to attach equipment accessories such as mesh bag with grommet on to the backplate

- Universal fits the standard holes on any standard backplate

- Great gear replacement accessories for underwater scuba diving,

Specification:

- Material: 316 Stainless steel

- Size: M7x10mm

- Height: Approx. 1.35 cm/0.53 inch

Having a surface marker buoy (SMB) or lift bag along on a dive can come in real handy when things do not come out as planned.

Divers know that a surface marker buoy is either required by most professional dive operations for safety or having one is a very safe ideal

So having a pocket while diving is not an option, but really a requirement from a safety stand point.

Lift bags are great to have when you find something you need to retrieve from below and want a safe and dependable means to bring it back to the boat or beach.

Our mesh carry pouch is a convenient pouch to store your Smb or lift bag so it may be used for those just in time needs,

Our mesh carry pouch will accommodate our smb's "Not our 10 footer!" and small size liftbags "Not like 100+ lift ones would be tight" plus other manufactures buoys and bags.

Our mesh carry pouch is made from heavy-duty PVC coated nylon mesh with a full-length side opening using a hook and loop closure to secure your item and still being able to deploy.

Our pouch has 5 stainless-steel grommet holes for attachment of the pouch to your gear (mounting hardware SMB not included) and measures 6.5 x 14 in (16.5 x 35.5 cm)

• Here is one of our finger spools but with NEW FLAT LINE in smaller width orange flat line taking up less space on your finger spool!
• Smooth Large center finger hole " 1" inch!
• With Piranha Dive you pay for only what you need! We sell our hard anodized aluminum finger spools WITHOUT any clip allowing you to choose the one that best suits your needs or using one you have!
• Want a different clip? Select a Stainless Steel or Brass double ender? We offer many choices at a special price which completes this product for use in the harshest diving conditions you may be diving in!
• We also added if you want a line swivel for your finger spool from our drop down box
• With our hard anodized aluminum spool their is no rust formation
• Dimensions: 2 3/4" inch diameter / 1 9/16" inch wide with a 1" inch finger hole
• If you need a double ender we have you also covered with many choices from our drop down box!!!

This tough stainless steel design is nealy indestructible Tool-Master is made with all stainless-steel tools then housed in a stainless steel handle plus a brass o-ring pick!

This is a quality engineered product has 11 tools which includes 5 open end wrenches, flat and Phillips head screwdrivers, plus 2 hex keys and a brass pick.

The Tool-Master comes with the most commonly used Scuba repair tools including a variety wrenches, screw drivers and brass o-ring pick.

So, don't be caught without the proper tool when out diving to fix minor equipment problems with the Tool Master kit.

Our Tool Master kit makes a great save-a-dive-kit Item and is also a great gift idea for that diving friend or diving significant other. Problems can happen but with this tool kit you will have some of the most common tools to fix your issue and go diving!

Features:

• Tool Master kit Contains:
• Durable & Corrosion Resistant Construction

• Stainless Steel Tools / Brass o-ring pick

• Stainless Steel Housing

• Open End Wrenches: 7/16", 1/2", 9/16", 5/8", 11/16" and a 15mm

• Screwdrivers: Phillips #1 with a Flat blade 3/16" and a 1/8" Flat blade

• Hex Keys: 7/64" and 1/8"

• Open End Wrenches: See list above
  (Brass O-Ring Tool) Soft brass pick does not damage your metal
  Flat & Phillips Head Screwdrivers: Listed above
  Hex Keys: Lised above

This tough stainless steel design is nealy indestructible Tool-Master is made with all stainless-steel tools then housed in a stainless steel handle plus a brass o-ring pick!

This is a quality engineered product has 11 tools which includes 5 open end wrenches, flat and Phillips head screwdrivers, plus 2 hex keys and a brass pick.

The Tool-Master comes with the most commonly used Scuba repair tools including a variety wrenches, screw drivers and brass o-ring pick.

So, don't be caught without the proper tool when out diving to fix minor equipment problems with the Tool Master kit.

Our Tool Master kit makes a great save-a-dive-kit Item and is also a great gift idea for that diving friend or diving significant other. Problems can happen but with this tool kit you will have some of the most common tools to fix your issue and go diving!

Features:

• Tool Master kit Contains:
• Durable & Corrosion Resistant Construction

• Stainless Steel Tools / Brass o-ring pick

• Stainless Steel Housing

• Open End Wrenches: 7/16", 1/2", 9/16", 5/8", 11/16" and a 15mm

• Screwdrivers: Phillips #1 with a Flat blade 3/16" and a 1/8" Flat blade

• Hex Keys: 7/64" and 1/8"

• Open End Wrenches: See list above
  (Brass O-Ring Tool) Soft brass pick does not damage your metal
  Flat & Phillips Head Screwdrivers: Listed above
  Hex Keys: Lised above

This tough stainless steel design is nealy indestructible Tool-Master is made with all stainless-steel tools then housed in a stainless steel handle plus a brass o-ring pick!

This is a quality engineered product has 11 tools which includes 5 open end wrenches, flat and Phillips head screwdrivers, plus 2 hex keys and a brass pick.

The Tool-Master comes with the most commonly used Scuba repair tools including a variety wrenches, screw drivers and brass o-ring pick.

So, don't be caught without the proper tool when out diving to fix minor equipment problems with the Tool Master kit.

Our Tool Master kit makes a great save-a-dive-kit Item and is also a great gift idea for that diving friend or diving significant other. Problems can happen but with this tool kit you will have some of the most common tools to fix your issue and go diving!

Features:

• Tool Master kit Contains:
• Durable & Corrosion Resistant Construction

• Stainless Steel Tools / Brass o-ring pick

• Stainless Steel Housing

• Open End Wrenches: 7/16", 1/2", 9/16", 5/8", 11/16" and a 15mm

• Screwdrivers: Phillips #1 with a Flat blade 3/16" and a 1/8" Flat blade

• Hex Keys: 7/64" and 1/8"

• Open End Wrenches: See list above
  (Brass O-Ring Tool) Soft brass pick does not damage your metal
  Flat & Phillips Head Screwdrivers: Listed above
  Hex Keys: Lised above

This patented, ergonomically designed, indestructible Tool-Pack is made with all stainless-steel tools then housed in a high impact-resistant fiber filled plastic handle which is over-molded with an ergonomic thermoplastic (TPU) handle grip.

This is a quality engineered product has 11 tools which includes 4 open end wrenches, flat and Phillips head screwdrivers,hex keys and a brass pick.

The T-2 Scuba Tool-Pack comes with the most commonly used Scuba repair tools including a variety wrenches, screw drivers and brass o-ring pick.

So, don't be caught without the proper tool when out diving to fix minor equipment problems with the T-2 Scuba Tool-Pack.

Our T-2 toolpack makes a great save-a-dive-kit Item and is also a great gift idea for that diving friend or diving significant other. Problems can happen but with this tool kit you will have some of the most common tools to fix your issue and go diving!

Features:

• Innovative T-2 Scuba Tool-Pack:
• Durable & Corrosion Resistant Construction

• Stainless Steel Tools / Brass o-ring pick

  Ergonomic Over Molded TPU Hand Grip

• High Impact Resistant Fiber Filled Plastic

• Open End Wrenches: 7/16", 1/2", 9/16", 5/8", 11/16" and a 15mm

• Screwdrivers: Phillips #1, Flat blade 1/8" and Flat blade 3/16"

• Hex Keys: 7/64" and 1/8"

• Open End Wrenches: See list above
  (Brass O-Ring Tool) Soft brass pick does not damage your metal
  Flat & Phillips Head Screwdrivers: Listed above
  Hex Keys: Lised above

Back in Stock!

This patented, ergonomically designed, indestructible Tool-Pack is made with all stainless-steel tools then housed in a high impact-resistant fiber filled plastic handle which is over-molded with an ergonomic thermoplastic (TPU) handle grip.

This is a quality engineered product has 11 tools which includes 4 open end wrenches, flat and Phillips head screwdrivers,hex keys and a brass pick.

The T-2 Scuba Tool-Pack comes with the most commonly used Scuba repair tools including a variety wrenches, screw drivers and brass o-ring pick.

So, don't be caught without the proper tool when out diving to fix minor equipment problems with the T-2 Scuba Tool-Pack.

Our T-2 toolpack makes a great save-a-dive-kit Item and is also a great gift idea for that diving friend or diving significant other. Problems can happen but with this tool kit you will have some of the most common tools to fix your issue and go diving!

Features:

• Innovative T-2 Scuba Tool-Pack:
• Durable & Corrosion Resistant Construction
• Stainless Steel Tools / Brass o-ring pick
• High Impact Resistant Fiber Filled Plastic

• Ergonomic Over Molded TPU Hand Grip

  Most Commonly Used Tool:

• Open End Wrenches: 7/16", 1/2", 9/16", 5/8", 11/16" and a 15mm

• Screwdrivers: Phillips #1, Flat blade 1/8" and Flat blade 3/16"

• Hex Keys: 7/64" and 1/8"

• Open End Wrenches: See list above
  (Brass O-Ring Tool) Soft brass pick does not damage your metal
  Flat & Phillips Head Screwdrivers: Listed above
  Hex Keys: Lised above

   

• Must for Save-A-Dive-Kit

We have our nestest D-Rings which are light weight aluminium D-rings

These have a slight bend making these easy to clip off too!

Add Color with these awesome anodized d-ring

Don't be fooled these are still strong enough to hold anything you wish to clip off to with no issues

Back in Stock!

This patented, ergonomically designed, indestructible Tool-Pack is made with all stainless-steel tools then housed in a high impact-resistant fiber filled plastic handle which is over-molded with an ergonomic thermoplastic (TPU) handle grip.

This is a quality engineered product has 11 tools which includes 4 open end wrenches, flat and Phillips head screwdrivers,hex keys and a brass pick.

The T-2 Scuba Tool-Pack comes with the most commonly used Scuba repair tools including a variety wrenches, screw drivers and brass o-ring pick.

So, don't be caught without the proper tool when out diving to fix minor equipment problems with the T-2 Scuba Tool-Pack.

Our T-2 toolpack makes a great save-a-dive-kit Item and is also a great gift idea for that diving friend or diving significant other. Problems can happen but with this tool kit you will have some of the most common tools to fix your issue and go diving!

Features:

• Innovative T-2 Scuba Tool-Pack:
• Durable & Corrosion Resistant Construction

• Stainless Steel Tools / Brass o-ring pick

  Ergonomic Over Molded TPU Hand Grip

• High Impact Resistant Fiber Filled Plastic

• Open End Wrenches: 7/16", 1/2", 9/16", 5/8", 11/16" and a 15mm

• Screwdrivers: Phillips #1, Flat blade 1/8" and Flat blade 3/16"

• Hex Keys: 7/64" and 1/8"

• Open End Wrenches: See list above
  (Brass O-Ring Tool) Soft brass pick does not damage your metal
  Flat & Phillips Head Screwdrivers: Listed above
  Hex Keys: Lised above

• We are proud to offer our newest color! Ocean Blue.. It has taken years to find this underwater webbing with all the right features. We love adding colors to our dive rigs too make us stand out from the crowd and know our diving rig verses another diver! Just like our orange, pink and yellow webbing we got this new color which is an amesome looking blue color!!
• This orange color is like our smb's orange color which is just the right brightness for visability when diving We use a professional grade of nylon webbing which can be used for many applications
• Our webbing is a on the is what we called standard stiffness which is used mainly for harnesses and weight belts becuase it has some flexibility but also is slightly flexible. A great webbing to use
• This webbing is just softer in flex than our med stiff red and other color webbing 
• Used for weight belts and other applications 
• Our webbing is made to be more durable for underwater use making it last longer and works better on weight belts, harnesses and backstraps and cam straps!
• This webbing is design for marine use and will hold up very well with underwater use 
• No refund available once cut to order
• Price is by the foot! 

Our Quick adjust 2" inch slider make donning on or off your harness a breeze with our newest piece!

Made out of SS304 stainless steel with a colored aluminum bar.

Now you ask what is the 15mm? That is the height and thickness of the aluminum bar since we have a 12mm in pink also which is slight lower and thinner bar. The height really depends on what you feel you want to use with your webbing

These do have small serrated teeth and really only grab when in use and not when donning your harness

So plenty of harness diver's have struggle to put on and remove their continuous loop harness set-ups because for many reasons but we have a simple solution now for you. Piranha now has our harness loop adjustment slider loop which makes putting on or removing from a one piece harness set-up simple and quick! Our harness loop adjustment slider ring fits all 2" / 50mm webbing Piranha Dive Mfg. sells!

Our loop adjustment slider ring allows your shoulder strap of webbing more easily adjustable on your backplates

Our loop adjustment slider ring allows your left shoulder strap of any 2-inch / 50mm continuous webbing harness to be freely adjustable, making your harness much easier to use.

Our loop adjustment slider ring is simply to install and use without cutting your webbing,

Divers using drysuits or heavy 7mm wetsuits will especially find using our loop adjustment ring a simple solution to a problem plus diver's with limited shoulder mobility

Our loop adjustment slider ring is made out of marine grade stainless steel to reduce rust formations

Our loop adjustment slider ring works with a 2-inch 50mm continuous webbing harness with most backplates

To assembly this loop adjustment ring you simple start your assembly of your webbing harness just insert the ring into the back of the diver's left waistband slot on the plate prior to threading the webbing. Instead of weaving the left side of the harness waistband through the plate, simply thread it through the loop adjustment slider ring.

Your left shoulder webbing will become easy to slide and making it adjustable to better get a tight fit to your divingrig rig. If your harness is built already simple remove the one side to place the loop adjustment ring in place

We recommend using only one loop adjustment slider ring on your leftside of your dive harness but you can always purhase two and play with the set up to see if you find a totally adjustable set up. We have played with two and found that using the leftsided one works best for most divers

NOTE: When you purchase our loop adjustment slider ring from us you will recive one Loop Adjustment Slider ring!!!!

Our Quick adjust 2" inch slider make donning on or off your harness a breeze with our newest piece!

Made out of SS304 stainless steel with a colored aluminum bar.

Now you ask what is the 12mm? That is the height and thickness of the aluminum bar since we have a 15mm in blue also which is slight higher and thicker bar. The height really depends on what you feel you want to use with your webbing

These do have small serrated teeth and really only grab when in use and not when donning your harness

Ok so this baby has also everything on a stainless black anodised card!

It has

You can measure up to 2" inches or 18cm

Nut Wrench you can slip over a nut to remove!

1/4"

10 metric

8 metric

6 metric

M2 M3 M4 M5 and M6

Butterfly wrench

Can Opener

Cable Bender

Flat Blade

Box Opener

Wire Cutter

Spokes Tightener

And more! Since it is flat and comes in a carrying pouch it worth putting one in your save a dive kit for those times you just neve know but never want to lose your dive on because you did not have the right tool to fix your problem

So our small and compact little service tool has many uses along with a bottle opener located on each side! See all the other tools listed below

Orifice Adjustment Flathead Screwdriver
2. O-ring Pick in BRASS
3. Inflator Schrader Valve Tool
4. Phillips Screwdriver
5. 1/4" Hex Wrench
6. 3/16" Hex Wrench
7. 5/32" Hex Wrench
8. Valve Nut Slotted Screwdriver

So our small and compact little service tool has many uses along with a bottle opener located on each side! See all the other tools listed below

Orifice Adjustment Flathead Screwdriver
2. O-ring Pick in BRASS
3. Inflator Schrader Valve Tool
4. Phillips Screwdriver
5. 1/4" Hex Wrench
6. 3/16" Hex Wrench
7. 5/32" Hex Wrench
8. Valve Nut Slotted Screwdriver

You can use this adapter to connect your computer depending on your design plus you want to your first stage plus many other uses

On one end you have a 7/16-20 end we had a small high pressure hole made so you do not need a spool to use with this fitting and the other end is a 3/8-24 male threaded fitting!!

This adapter uses a buna o-ring but you can always switch after using it for a while with a viton if you need too

Need to keep an item dry? Well we may have the fix for you

The Big Blue buoyant scuba holding canister will float to the surface when you release it so make sure while diving you have this caister secured. You can either place this canister in a poocket or purchase a quick attach pocket tha holds the canister anywhere you use 2" or even 1" inch webbing!! This canister also has dual o-rings for a secure water tight application

Crafted with precision engineering, double O-ring sealed, and designed for durability, this key holder is a must-have addition to your gear collection.

Constructed from high-quality aluminum, our key keeper is not only lightweight but also buoyant, ensuring that your keys, credit cards and driver's license stay afloat if accidentally dropped into water. No more frantic searches or lost keys or cards - this innovative design provides peace of mind, whether you're on a diving expedition, kayaking adventure, or simply enjoying a day at the beach.

But the Aluminum Key Keeper is more than just a stylish accessory - it's designed for practicality and convenience. The sturdy aluminum construction ensures long-lasting performance, while the compact size fits comfortably in your pocket or attaches seamlessly to your gear. We also offer a quick attached pocket OPTION that holds your canister secure while diving. Select this option at our drop down box

Whether you're exploring underwater caves, navigating choppy seas, or simply relaxing by the pool, Don't let water worries dampen your adventures - with our Aluminum Key Keeper, you can dive in with confidence.

INCLUDED in your dive canister:

* Spare dual canister o-rings

*Silcone grease for your o-rings

* Slide Locking Lanyard

NOT INCLUDED but can be purchased as an option

* Quick attach canister holder Note: Has a velcro tab on the front to hold your canister inside the pocket plus you get 2 feet of 1/8 black bungee to secure your canister if you choose

Need to keep an item dry? Well we may have the fix for you

This is for divers who love diving in PINK! This ones for you

The Big Blue buoyant scuba holding canister will float to the surface when you release it so make sure while diving you have this caister secured. You can either place this canister in a poocket or purchase a quick attach pocket tha holds the canister anywhere you use 2" or even 1" inch webbing!! This canister also has dual o-rings for a secure water tight application

Crafted with precision engineering, double O-ring sealed, and designed for durability, this key holder is a must-have addition to your gear collection.

Constructed from high-quality aluminum, our key keeper is not only lightweight but also buoyant, ensuring that your keys, credit cards and driver's license stay afloat if accidentally dropped into water. No more frantic searches or lost keys or cards - this innovative design provides peace of mind, whether you're on a diving expedition, kayaking adventure, or simply enjoying a day at the beach.

But the Aluminum Key Keeper is more than just a stylish accessory - it's designed for practicality and convenience. The sturdy aluminum construction ensures long-lasting performance, while the compact size fits comfortably in your pocket or attaches seamlessly to your gear. We also offer a quick attached pocket OPTION that holds your canister secure while diving. Select this option at our drop down box

Whether you're exploring underwater caves, navigating choppy seas, or simply relaxing by the pool, Don't let water worries dampen your adventures - with our Aluminum Key Keeper, you can dive in with confidence.

INCLUDED in your dive canister:

* Spare dual canister o-rings

*Silcone grease for your o-rings

* Slide Locking Lanyard

NOT INCLUDED but can be purchased as an option

* Quick attach canister holder Note: Has a velcro tab on the front to hold your canister inside the pocket plus you get 2 feet of 1/8 black bungee to secure your canister if you choose

So you now are bringing in a softer version of our Piranha Logo

The color being a black mist

Our shirts do not shink after wahing and drying them in a dryer

We also have a small front side logo with a larger backside logo!

We now also use a special vinyl logo that holds up even better yet is not hot on your back from the logo.. Try it out to see our soft and comfortable shirt we have ever had made

Wash Instructions for best results!

Always turn your shirt inside out since doing this allows the vinyl with our logo to stay fresh looking!!

So you now are bringing in a softer version of our Piranha Logo

The color being a black mist

Our shirts do not shink after wahing and drying them in a dryer

We also have a small front side logo with a larger backside logo!

We now also use a special vinyl logo that holds up even better yet is not hot on your back from the logo.. Try it out to see our soft and comfortable shirt we have ever had made

Wash Instructions for best results!

Always turn your shirt inside out since doing this allows the vinyl with our logo to stay fresh looking!!

So we have a new lanyard giving you a little color and style to your diving rig but still making it easy to reach any of your diving accessories

We use a stainless steel snap that has been coated giving it a blackish look and a stainless steel spring to keep your snap working!!

You can hang your Spg and gauge consoles, Spg's, Safety Knifes, Dive Lights and just about anything you wish to secure to your diving rig

The great thing about these lanyards are if they get hung up you can quickly cut the braideed line to release yourself!

Our swivel bolt snap uses a 1/2" inch eye

7/16" Gate opening

3 1/2" long snap

10 1/4" overall length top to bottom

Characteristic:

* The ropes are all hand-woven with seven-core nylon rope and nine-core nylon rope, which are tough and wear-resistant and are built with water use in mind

* Easily hang your diving equipment on your diving rig, and it can also be used for other outdoor sports, making it easy to take for any outdoor use

* With this lanyard know your dive rig will not be confused with another diver's rig when diving off of dive boats

So you now are bringing in a softer version of our Piranha Logo

The color being a black mist

Our shirts do not shink after wahing and drying them in a dryer

We also have a small front side logo with a larger backside logo!

We now also use a special vinyl logo that holds up even better yet is not hot on your back from the logo.. Try it out to see our soft and comfortable shirt we have ever had made

Wash Instructions for best results!

Always turn your shirt inside out since doing this allows the vinyl with our logo to stay fresh looking!!

Here is a cover for your Shearwater Perdix dive computer

Our Shearwater Perdix Dive Computer Covers are made out of a liquid silicone.

Done in a one-piece molding process and this material provides good elasticity.

The covers have supple touching and shock-proof, aging resistant, tight fit, effectively prevent dust.

Multiple Color: We have multiple colors for you to choose from,

Easy to Assembly: The Protective Set is easy to install and durable.

Professional: The Protection Tools have appropriate size, making it perfectly match with your computer cover.

Colors we have: blue, black, white, red, camouflage green are available

Material: Liquid Silicone Rubber

Size: Approx. 8.5x7.5x4cm/Approx.3.34x2.95x1.57in

So you now are bringing in a softer version of our Piranha Logo

The color being a black mist

Our shirts do not shink after wahing and drying them in a dryer

We also have a small front side logo with a larger backside logo!

We now also use a special vinyl logo that holds up even better yet is not hot on your back from the logo.. Try it out to see our soft and comfortable shirt we have ever had made

Wash Instructions for best results!

Always turn your shirt inside out since doing this allows the vinyl with our logo to stay fresh looking!!

So you now are bringing in a softer version of our Piranha Logo

The color being a black mist

Our shirts do not shink after wahing and drying them in a dryer

We also have a small front side logo with a larger backside logo!

We now also use a special vinyl logo that holds up even better yet is not hot on your back from the logo.. Try it out to see our soft and comfortable shirt we have ever had made

Wash Instructions for best results!

Always turn your shirt inside out since doing this allows the vinyl with our logo to stay fresh looking!!

So you now are bringing in a softer version of our Piranha Logo

The color being a black mist

Our shirts do not shink after wahing and drying them in a dryer

We also have a small front side logo with a larger backside logo!

We now also use a special vinyl logo that holds up even better yet is not hot on your back from the logo.. Try it out to see our soft and comfortable shirt we have ever had made

Wash Instructions for best results!

Always turn your shirt inside out since doing this allows the vinyl with our logo to stay fresh looking!!

So you now are bringing in a softer version of our Piranha Logo

The color being a black mist

Our shirts do not shink after wahing and drying them in a dryer

We also have a small front side logo with a larger backside logo!

We now also use a special vinyl logo that holds up even better yet is not hot on your back from the logo.. Try it out to see our soft and comfortable shirt we have ever had made

Wash Instructions for best results!

Always turn your shirt inside out since doing this allows the vinyl with our logo to stay fresh looking!!

So you now are bringing in a softer version of our Piranha Logo

The color being a black mist

Our shirts do not shink after wahing and drying them in a dryer

We also have a small front side logo with a larger backside logo!

We now also use a special vinyl logo that holds up even better yet is not hot on your back from the logo.. Try it out to see our soft and comfortable shirt we have ever had made

Wash Instructions for best results!

Always turn your shirt inside out since doing this allows the vinyl with our logo to stay fresh looking!!

So you now are bringing in a softer version of our Piranha Logo

The color being a black mist

Our shirts do not shink after wahing and drying them in a dryer

We also have a small front side logo with a larger backside logo!

We now also use a special vinyl logo that holds up even better yet is not hot on your back from the logo.. Try it out to see our soft and comfortable shirt we have ever had made

Wash Instructions for best results!

Always turn your shirt inside out since doing this allows the vinyl with our logo to stay fresh looking!!

So you now are bringing in a softer version of our Piranha Logo

The color being a black mist

Our shirts do not shink after wahing and drying them in a dryer

We also have a small front side logo with a larger backside logo!

We now also use a special vinyl logo that holds up even better yet is not hot on your back from the logo.. Try it out to see our soft and comfortable shirt we have ever had made

Wash Instructions for best results!

Always turn your shirt inside out since doing this allows the vinyl with our logo to stay fresh looking!!

So you now are bringing in a softer version of our Piranha Logo

The color being a black mist

Our shirts do not shink after wahing and drying them in a dryer

We also have a small front side logo with a larger backside logo!

We now also use a special vinyl logo that holds up even better yet is not hot on your back from the logo.. Try it out to see our soft and comfortable shirt we have ever had made

Wash Instructions for best results!

Always turn your shirt inside out since doing this allows the vinyl with our logo to stay fresh looking!!

Our newest piece of hardware to add to your harness allowingyou to quickly adjust to get a better fit

You can use this for many other uses on your harness where you use 2" inch webbing

Works on all 2" inch webbing

Quickly allows you to adjust your harness

You are purchasing one "1" slider at this price

Super soft sleeve for your crotch webbing!

If your using stiff webbing this will reduce your webbing from cutting into your neoprene or even a drysuit

Even our standard webbing will work with this product and give more protection to our rig

Special designs allows you to fit any 2" inch webbing area

Our sleeve is roughly 15" inches long

You just slide this sleeve over your webbing giving a nice padded area. Using a scooter this pad will take all the pressure off your bottom!!

We also found you can cut these into smaller pieces and use them on your harness to locate hardware or even use them as shoulder pads just order 2 of them and slide them on!

Color is black only

The ultimate footpocket meets the ultimate composite blade. Meet the a high performance Polymer Longblade Fin.

When they were designing this second generation of this polymer longfin. They wanted to improve on this already outstanding fin we set out to create a higher performance fin at a price that divers could afford! Well they did both creating an outstanding fin with a price point divers could live with. To accomplish all this this we went back to the drawing board. We created an all new blade made from a proprietary carbon - nylon blend that replicates the properties of a carbon fiber fin. Its reinforced base is stiff and responsive. From there it becomes progressively thinner and more flexible, allowing for maximum energy transfer.

We mated this amazing blade to our newly developed tri-density foot pocket. It features three unique rubber blends that work together to create a pocket that is stiff, responsive, and soft in areas where it matters most. The end result is a performance freedive fin that kicks well above the competition.

Pockets and blades are modular. Secured with screws and blade clips. This allows for smaller storage, easy repairs, and upgrades.

Features:

• 22 Degree Blade Angle
  
• 25" inches / 63.5 cm Blade Length
• Proprietary Carbon - Nylon Polymer Blade
• Tri-density Full Foot Pocket
• Stiff Foot Pocket Bed for Enhanced Thrust
• Soft Foot Pocket Upper for Reduced Foot Fatigue
• Modular Design
• Black Only Color

So did you ever try looking behind you while diving to make sure your buddy is still there only to find out they stop and now you have no idea of where they are? Well we have a new rearview looking mirror using a convex lens for durability

The comes with a bungee for wrist mounting all set to go

We also included a spare convex mirror with tool to replace it if it is damage beyond use

We have them at a special price so you can purchase one to give it a try and see what you been missing!

The new model has an improve holding of the mirror!

This special low pressure adapter has the following ports

1 Female 9/16 hose fitting allows you to run your low pressure hose to

1 Male 9/16 hose fitting Can connect to 2nd stage

1 3/8 Female fitting on the top side to connect a low pressure hose or choose to add our low pressure indictator adapter you can purchase below! Our on/off adapter uses 2 LR44 batteries that you need to add for the indicator to work. We include 2 batteries with your order if you order the indicator in our drop down

You can also just use a low pressure port plug with a 3/8 thread to seal the one port until your ready to use it

ON/OFF Low Pressure Air Flow Indicator - 2nd Stage.. Know when you have your air is turned on with flow with our light indicator lighting up! Place this adapter anywhere inline on your low pressure hoses to ensure you have air flow.

1 Male 9/16 threaded side

1 Female threaded side

Comes With the BATTERIES: Uses 2 LR44 Batteries

BURN TIME: 30 HRS

UNDER WATER: 50 METER / 165 Feet

WORKING PRESSURE: 150 PSI MAX

This special air flow adapter can be used where you have a female 1/4-NPT port to check you have air flow moving through your air lines works well on adapter with several ports and you are not using one

Also can work with our

Special layout Low Pressure Adapter

Specs on this air flow indicator

BATTERY SELECTION: LR44 X 2.... Does not come with this battery

Our AD-51 adapter below has a 9/16 female end with the other side a male 9/16 threaded end and can use this indicator

Our quick release clip comes with a strong 2 3/4" loop on one side for clipping items to your rig with a plastic 360 swiveling clip on the other end to allow you to qickly affix your clip to almost any area on your dive rig

The loop allows you secure your item to this strap for quick deplyment

On the other side is a plastic 360 swiveling clip making it easy to get on or off quickly

We have 1" inch webbing on both sides being held by a 1" inch plastic quick release snap. The snap locks into position and by depressing both sides of the plastic clip you can quickly detact your item

9.25" inches is the overall length of your clip

Our webbing uses a double stitch on each side to give you a longer life and more durablity. Plus our webbing has color giving you what you want to quickly notice your item with your webbing color!

Made right here in the good ole Usa!

Our quick release clip comes with a strong 2 3/4" loop on one side for clipping items to your rig with a plastic 360 swiveling clip on the other end to allow you to qickly affix your clip to almost any area on your dive rig

The loop allows you secure your item to this strap for quick deplyment

On the other side is a plastic 360 swiveling clip making it easy to get on or off quickly

We have 1" inch webbing on both sides being held by a 1" inch plastic quick release snap. The snap locks into position and by depressing both sides of the plastic clip you can quickly detact your item

9.25" inches is the overall length of your clip

Our webbing uses a double stitch on each side to give you a longer life and more durablity. Plus our webbing has color giving you what you want to quickly notice your item with your webbing color!

Made right here in the good ole Usa!

Our quick release clip comes with a strong 2 3/4" loop on one side for clipping items to your rig with a plastic 360 swiveling clip on the other end to allow you to qickly affix your clip to almost any area on your dive rig

The loop allows you secure your item to this strap for quick deplyment

On the other side is a plastic 360 swiveling clip making it easy to get on or off quickly

We have 1" inch webbing on both sides being held by a 1" inch plastic quick release snap. The snap locks into position and by depressing both sides of the plastic clip you can quickly detact your item

9.25" inches is the overall length of your clip

Our webbing uses a double stitch on each side to give you a longer life and more durablity. Plus our webbing has color giving you what you want to quickly notice your item with your webbing color!

Made right here in the good ole Usa!

Our quick release clip comes with a strong 2 3/4" loop on one side for clipping items to your rig with a plastic 360 swiveling clip on the other end to allow you to qickly affix your clip to almost any area on your dive rig

The loop allows you secure your item to this strap for quick deplyment

On the other side is a plastic 360 swiveling clip making it easy to get on or off quickly

We have 1" inch webbing on both sides being held by a 1" inch plastic quick release snap. The snap locks into position and by depressing both sides of the plastic clip you can quickly detact your item

9.25" inches is the overall length of your clip

Our webbing uses a double stitch on each side to give you a longer life and more durablity. Plus our webbing has color giving you what you want to quickly notice your item with your webbing color!

Made right here in the good ole Usa!

Our quick release clip comes with a stainless steel split ring on one side for clipping items to your rig with a plastic 360 swiveling clip on the other end to allow you to qickly affix your clip to almost any area on your dive rig

Our 1 1/8 stainless steel split ring makes it easy to clip your dive item quickly

On the other side is a plastic 360 swiveling clip making it easy to get on or off quickly

We have 1" inch webbing on both sides being held by a 1" inch plastic quick release snap. The snap locks into position and by depressing both sides of the plastic clip you can quickly detact your item

7.25" inches is the overall length of your clip

Our webbing uses a double stitch on each side to give you a longer life and more durablity. Plus our webbing has color giving you what you want to quickly notice your item with your webbing color!

Made right here in the good ole Usa!

Our quick release clip comes with a stainless steel split ring on one side for clipping items to your rig with a plastic 360 swiveling clip on the other end to allow you to qickly affix your clip to almost any area on your dive rig

Our 1 1/8 stainless steel split ring makes it easy to clip your dive item quickly

On the other side is a plastic 360 swiveling clip making it easy to get on or off quickly

We have 1" inch webbing on both sides being held by a 1" inch plastic quick release snap. The snap locks into position and by depressing both sides of the plastic clip you can quickly detact your item

7.25" inches is the overall length of your clip

Our webbing uses a double stitch on each side to give you a longer life and more durablity. Plus our webbing has color giving you what you want to quickly notice your item with your webbing color!

Made right here in the good ole Usa!

Our quick release clip comes with a stainless steel split ring on one side for clipping items to your rig with a plastic 360 swiveling clip on the other end to allow you to qickly affix your clip to almost any area on your dive rig

Our 1 1/8 stainless steel split ring makes it easy to clip your dive item quickly

On the other side is a plastic 360 swiveling clip making it easy to get on or off quickly

We have 1" inch webbing on both sides being held by a 1" inch plastic quick release snap. The snap locks into position and by depressing both sides of the plastic clip you can quickly detact your item

7.25" inches is the overall length of your clip

Our webbing uses a double stitch on each side to give you a longer life and more durablity. Plus our webbing has color giving you what you want to quickly notice your item with your webbing color!

Made right here in the good ole Usa!

Our quick release clip comes with a stainless steel split ring on one side for clipping items to your rig with a plastic 360 swiveling clip on the other end to allow you to qickly affix your clip to almost any area on your dive rig

Our 1 1/8 stainless steel split ring makes it easy to clip your dive item quickly

On the other side is a plastic 360 swiveling clip making it easy to get on or off quickly

We have 1" inch webbing on both sides being held by a 1" inch plastic quick release snap. The snap locks into position and by depressing both sides of the plastic clip you can quickly detact your item

7.25" inches is the overall length of your clip

Our webbing uses a double stitch on each side to give you a longer life and more durablity. Plus our webbing has color giving you what you want to quickly notice your item with your webbing color!

Made right here in the good ole Usa!