This pointer has a overall length of 13 1/4" inches
Comes with a Pink color round low profile adjustable lanyard attached by a stainless steel split ring
Has up to 10" CM graduation marks on the bar
Pointer is made out of aluminum T6061 / 8.0 mm diameter and is anodized
You can use as a pointer, tickle stick or keeping off or away from objects in your dive. We use these in the copper river to lock us to the bottom of the faster moving current! Great for that also
oClip constructed of corrosion resistant 316 stainless steel
oHelps control air cell deflation to reduce drag and optimize trim
The IST Dolphin Tech Side Mount Bungee with Stainless Steel Clip is designed for use with side mount diving rigs. Attach the bungee over your air cell to ensure it deflates evenly and compresses as it deflates.
Constructed of tough rubber, the bungee is 19.7 inches (50cm) and includes a 1.5 Inch (4cm) 316 stainless steel quick clip with screw down closure at one end.
Keep a couple spares in your gear bag and be ready for your next cave or wreck adventure.
So we now have a cutting tool that will just keep cutting with a ceramic blade! Comes with a pouch that you can mount with any 2" inch / 50mm webbing so place on webbing your store in your pocket with its small compact size
Ceramic is the 2nd hardest material which makes it an awesome material for a cutting blade. You may never need to replace the blade but if you do we do have spares you can purchase as a back-up. With using a ceramic blade it never rusts and since ceramic is not a porous material it is less likely to correct dirt or grime while diving! We do recommend that you just do a quick rinse after your dive just to keep your cutter in tip top shape
Our cutter is secured by velcro inside a pouch plus we have a 1" inch plastic d-ring at the end of 1" webbing to quickly remove your cutter for quick use! Cut line or webbing in a breeze with our cutter
If down the road in do need to replace a blade because it is damaged or lossing some of its cutting edge you simply remove 2 stainless steel screws and insert a new blade
Our single cutting edge will not allow your finger or hoses to get caught up with being cut since it uses a narrow channel to cut with. The cutting channel is rough;y 7/16" inches
The webbing lease is roughly 3" inches long and add the 1" inch d-ring for a total of 3 1/2" inches
We have a large 1" opening by 1 1/4" inches wide for your fingers if you wish to get into the cutter holder or if your using thicker gloves just hold it with the webbing lease
This is a small compact and lightweight cutter great for many uses but a diver must have since line is always around wrecks and any area folks are fishing!
If you really want a spare blade purchase from our drop down but we are telling you this blade will hold its edge. The only thing is it could gets damage so if your on a dive trip or away from home is really the only time to consider a spare blade!
So you do not want your snap to hold you tight in case you need to get freed quickly?
We have these small break away connector for just that purpose
Simply snap your swivel bolt snap to the inside part of this connector and then snap on a low pressure or Bc inflator hose. This connector has a 3/8" inch opening so as long as you are not using a thin hose you could even use a high pressure hose in braided or rubber
Holds in place until you give a good tug / pull and then what you are clip to it will release you from it. The snap will stay connected to whatever you snap onto but you and your hose will release
Size and Diamter- The scuba diving multi tool size is about 8.5x5.3x0.5cm/3.35x2.09x0.12inch, hole Diameter: 1cm/0.39inch, small size and lightweight, portable to grip, easy to carry
Convenient to Use- Geometric design makes this multi tool practical as well as special. Our tools for repairing diving regulator consist of frequently used tools, very convenient for you to use
Rustproof and Durable- The tools for repairing diving regulator is made of high quality 316 stainless steel material, anti-rust and sturdy, durable and long service life
For Diving Maintenance?- This multi tool is suitable for scuba diving regulator repair and maintenance. It is a great diving accessory for diving lovers
The Deluxe Drop Dee is a clever, yet versatile, piece of stainless hardware that will enhance any diver's kit. With the ability to reposition the angled D-ring, the plate can be mounted on either horizontal webbing (waist) or vertical webbing (shoulder).
You can now add our ring loop to any backplate being stainless steel or aluminum ones
This ring loop can be fixed eith on the front end or on the backside of the plate
Uses 2 screws with washers to fix onto your backplate
Made out of 316 material even the hardware to reduce rusting!
Note: We used a little silicone inside the screw threads to hold the screws from backing out or you can even use a lock washer to hold them in place lastly if you know that is where you wish to locate them use blue locktite to hold in place
Many divers take compasses for granted, considering them just an accessory to an overall dive gauge console system. Trying to navigate with a poorly designed or improperly functioning compass can be one of diving's more frustrating events. This Extreme Tilt Hose Mount Compass is a dual-purpose compass. The convenient side window allows quick reference of large, easy-to-read bearing indicators on a luminescent display for gun-sight accuracy. Or, for divers who prefer relative navigation, the ratchet bezel can be rotated easily even with thick neoprene gloves.
The luminous dial of the compass is designed with a half black / half luminous graphic to make quick work of compass direction, especially in dim light. The dial rests on a precision bearing and incorporates extremely strong magnets for super quick response, tilt and accuracy. While the compass module itself is very compact, the housing has a large vertical interior allowing viewing angles that would stop other compasses in their tracks. The compass bezel has compass headings in 30 Degree numbered increments and indicator marks for every 10 Degree.
Bezel has twin heading indicators for alignment of compass course, and a lubber line across the compass face. This highly accurate US made GP03 liquid filled compass comes in a durable rubber boot with a hose mount nut that fits full size 0.5" (12mm) high pressure hoses.
Note: Like all of Piranha's Dive Products we warranty this item any from manufacturing defects!
Have an issue or question with this or any of our products please feel free to email us at Piranhadivemfg@yahoo.com
to get your question or issue answered.
These Items have a limited warranty for 12 months from date of purchase so always keep your invoice number to allow us to verify everything during this period.
**Also has a hole on the top end of the blade to affix a bungee or line to keep your knife from being dropped during a dive!
**We also include 2 quick release leg straps!
*Included is a Nylon Fabric Sheath has loop at the top to slide onto your webbing or a plastic "D"-ring on the other end to connect your knife to your rig with
**Lastly we have raised little dots to help you hold your knife with or without gloves! These dots allow the user a better feel when holding the knife. The 2 piece handle is made from TPE and the blade has a full tang that the 2 piece handle is secure too
So this little holder you can secure your hoses and route them so they are not hanging out all over the place
Secure your corrugated hose if you need to also
Place your Spg in a secure position and route the hose tightly to your set-up
Strong Nylon material making this durable in your diving applications
You can locate your EezyCut knife with the standard or even the flex harness in more ways and placing it where you can get to it quickly if needed too
With this tab you can now clean up your diving rig with so many things you can do well we just cannot list them all but you will surely find these little guys very helpful
Large 2" x 2" inch velcro to adjust to fit your rigging
Has a large 2"+ inches of none velcro area so you can use this almost anylace on your rig!When you lay this piece out it is 6 3/4" inches long
Extreme tilt potential of +/- 30 degrees. Complete: compass module, bungee mount & bungee cord. 30" length of 4mm bungee cord. Mount with one continuous loop or two separate loops for redundancy. Luminescent easy-to-read compass card. Top and side reading. Northern hemisphere. Manufactured in Italy
Product Details
Feature 1.
Superior tilt potential of +/- 30 degrees
Feature 2.
Complete: compass module, bungee mount & bungee cord
Feature 3.
30 inches (76 cm) length of 4mm bungee cord
Feature 4.
Mount with one continuous loop or two separate loops for redundancy
Feature 5.
Luminescent easy-to-read compass card. Top and side reading. Northern hemisphere
Note: Like all of Piranha's Dive Products we warranty this item any from manufacturing defects!
Have an issue or question with this or any of our products please feel free to email us at Piranhadivemfg@yahoo.com
to get your question or issue answered.
These Items have a limited warranty for 12 months from date of purchase so always keep your invoive number to allow us to verify everything during this period.
With so many SMBs in the marketplace, it is easy to become confused. Some are "bare bones" proving difficult to use, while others are overbuilt, more suited for extreme expeditions.
The pocketed Surface Marker Buoy (SMB) adds all the right features with a lower pocket to hold a spool or even weight
Features:
6 ft (183 cm) length/large 12 in (30.5 cm) circumference
Lower pocket accommodates a lead weight or finger spool
Open bottom with anti-spill baffle
Combination oral and BC QD inflation
Overpressure relief valve w/ manual pull cord
SOLAS reflective tape on both sides
Note: Like all of Piranha's Dive Products we warranty them from manufacturing defects!
Have an issue or question with this or any of our products please feel free to email us at Piranhadivemfg@yahoo.com
to get your question or issue answered.
These Items have a limited warranty for 12 months from date of purchase so always keep your invoive number to allow us to verify
*Looking for no bump ties but only need a few? Well we sell them by the piece so you can get a few with a couple extra and not have to carry so many you will have them for a lifetime!
* Improve your diver's comfort & safety.
* Low profile and smooth with head height of .103in.
So you can now purchase three 5 grams little packs for those untimely emergencies
You now have little little packets so if you used one you can help your dive buddy or yourself it other repairs maybe needed on your wetsuit or even a drysuit! But you can also fix many other items if the need arises with this adhesive
Lays a clear adhesive that is not just flexible but also very durable
Deploying a marker buoy from depth has its challenges and here could make your dive a little easier? Also new to launching a surface marker buoy? This will make your learning much quicker and safer
KEY FEATURES
Easy Deploy Design
Simplifies Procedure
Just Add Air & Let-It-Fly
Provides Excellent Visibility
Over-Pressure Relief Valve w/Pull Cord
Purpose
Surface Marker Buoy
Materials
Buoy: Urethane Laminated Fabric
Dimensions (L x Circumference)
6' x 12" (183 x 30.5cm)
Color
Multiple
Inflation (Valve)
Combination Oral & QD Hose Inflation
Over Pressure Relief Valve
Yes
Manual Dump Valve
Yes
Finger Spool Included!
Material
Molded
Line Length
50' (15m) WHITE Lline
Attachment Point
D-Ring
Securing a line spool and SMB, connecting them together, deploying them, all while maintaining neutral buoyancy and holding on to other gear, has overwhelmed many a diver.
The Fast Launch Marker Buoy simplifies the procedure! The line spool is stored within the marker buoy and is already connected to it! Just add air and let it fly. 6' (183cm) in length with a large 12" (30.5cm) circumference provides excellent visibility when deployed on the surface.
Lower pocket includes a spool with 50' (15m) of line. Spool line is attached to D-ring inside the pocket.
Open bottom with anti-spill baffle plus also has a Combination oral and QD hose inflation.
Over-pressure relief valve with pull cord prevents your smb from damage when air expands!
SOLAS reflective tape on both sides increases visibility in low light or night conditions.
The Fast Launch Marker Buoy rolls up to a compact size and is secured with a squeeze-style side-release buckle.
Note: Like all of Piranha's Dive Products we warranty them from manufacturing defects!
Have an issue or question with this or any of our products please feel free to email us at Piranhadivemfg@yahoo.com
to get your question or issue answered.
These Items have a limited warranty for 12 months from date of purchase so always keep your invoice number to allow us to verify
With continuous weave harnesses, it can often be difficult to tighten the shoulders by pulling on the waist straps. This is due to friction caused by the tortuous path that the webbing makes as it goes through the dual slots in the backplate.
This Slide Bar mounts on the back of the plate "Stainless or Alum", between the slots. The slick, rounded surface minimizes the friction and makes the waist straps easier to pull through. Plus with the raised edges it helps keep the webbing from wondering off and causing issues when you pull your harness to tighten it to your body
Place these near the bottom sides on the left and right webbing slots to make these work properly
This design is for divers who like to bite into your mouthpiece! This will reduce the amount of mouthpieces you go thru during a normal dive season
Also excellent choice for cold water dives where you tend to bite or clamp down harder on your mouthpiece or want a more secure feeling holding your regulator this is an excellent choice
Need a holder for this design mouthpiece? Select our mouthpiece holder called "Tough Bite" design to fit this mouthpiece!
Our silicone mouthpiece is comfortable to wear during long dives
The silicone used makes using this mouthpiece very flexible, soft feeling and comfortable in your mouth while diving
For a more secure hold of your regulator in your mouth this could be just what you have been looking for
The DiveAlert SMB (surface marker buoy) features Closed-Circuit (one-way valve) construction, which prevents air spill at surface. Inflate on the surface to attract visual attention or redundant flotation. Inflate at depth to send up as a surface marker. Solas reflective tape (Coast Guard approved) across top of SMB creates better visibility day and night.
NOTE: The picture is of an ORANGE DMB1 Smb but you are purchasing a yellow one!
Over-Pressure Valve (OPV) prevents bursting and easy air dumping.
Deluxe SMB is 65? long by 8? wide (165 x 20 cm) which provides approximately 40 lbs. (18.1 kg) of lift.
Nylon strap handle on top allows for easy attachment of light or slate.
Material : 400 Denier Polyurethane Coated Nylon. Color : High Visibility Safety YELLOW. Dimensions : 65? Long By 8? Wide (165 X 20 Cm). Buoyancy: Approximately 40 Lbs. (18.1 Kg). Weight [with packaging] 0.65 lb
These smaller weight pockets are perfect to allow you to trim out with placing weight in all the right places
These will fit any 2" inch webbing and includes a tri-glide to place between the webbing slots on the back to hold your trim pocket in place
Made out of a heavy cordura material making it very durable for even the hardest diving conditions
The pocket is secured by velcro so releasing is easy just pulling up the flap
These compact pockets hold up to 4lbs either hard or soft weights. Hard weights work better but you can get the soft weights into the pockets also!
You are purchasing one pocket want
Featured Items
What has just landed and what is on the way out, in one section.
In this category: Intro Items, Close-Outs, Trim Weight Pockets Quick Attach Type, Tear Drop Open D-Ring w/ Teeth, New! Convex Rearview Mirror w/ Bungee Mount Gen 2 Design, New! Storage Pocket, Katana Freediving Fin Free Domestic Ground Shipping, Weight Block BLACK w/ Black bungee Purchasing a PAIR.