Made of high quality Stainless Steel with locking teeth
2 Inch wide slots to fit on your webbing
1/4 wide ID slot area allows you to even slide 2 pieces of webbing thru
Measures 2 5/8" long x 1 5/8" inches wide
Has 2 holes that fit 3/16 bungee cord or Latex Tubing "You Choose EITHER a 12 inch BLACK Bungee cord or Latex Tubing supplied with retainer" Select from drop down box below!!
Many uses: Weight keeper, Use the bungee cord supplied and slide your inflator hose thru hold items in place.. You take our bungee and fit it to your application!
Shown in picture with bungee slided thru the holes and one with the bungee cord
Our 2 Inch crotch strap works with our backplates and many others on the market today!
Our 2 inch crotch strap runs from the adjustable part of the strap on the rear to mount to the slot in the backplate to the front where the loop goes on the waist belt webbing at the front of your harness
Using this crotch strap helps to maintain your harness from moving up on our body during a water entry from a boat or while ascending during your dive. Also by holding your rig in place this prevents your cylinders/valves from contacting your head
Our strap has a 2 inch stainless steel scooter ring for use with diver propulsion vehicles at the front of the strap right below the webbing loop.
You can also use this 2 inch scooter ring for applications such as a temporarily place to clip off an item such as reels, spools or camera's.
On the backside of the strap we use a 5mm stainless steel d-ring that uses a slider so you can adjust it for your final positioning
We also include a 2" inch wide rubber loop that you can slide along the crotch strap webbing
We use a 2" inch soft black webbing so it does not cut into your wetsuit material or cause any damage that stiffer webbing can cause
The 2-inch continuous webbing crotch strap is preferred by tec divers who use Scooter's or DPVs for extended dive periods. The 2 inch webbing creates a distribution of weight because of the width provides a greater secure feeling during those dives
- Scuba diving weight belt keeper with double bent D ring. For use on any 2" inch webbing! You can place this keeper on your waist or shoulder webbing for even more ways to secure your dive items
- Durable, strong, lightweight, anti-corrosion and portable. - Universal fits all standard 2"/5cm wide webbing belts/harness. - Effectively prevents weight belt releasing accidentally.
- Great piece to clip off for your spg! Use for the rear part of your harness and clip off smb's and liftbags - Great replacement gear accessories for scuba diving BCD, free diving, snorkeling.
Specification:
- Material: 304 Stainless steel - Length: Approx. 13.4cm/5.3 inch - Width: Approx. 3.7cm/1.5 inch - Color: Silver
* So this is a brand new low profile buckle for folks that want something streamline
* This is a 2 piece stainless steel buckle made to be very durable
* We use 1/8" inch stainless to build this buckle and tumble it for 48 hours to make this little gem as smooth as solk and it will not cut or damage your webbing!
* Made to be used with 2" inch wide webbing
* We make the top part of our buckle which is the part that you slide thru the slot to lock it in position with a little longer lip to help you with faster insertion and lock-down or quick releasing of the buckle
* We made the webbing slots wide enough that you can use the thickess webbing or the thinnest with no issues
* We also made the bottom part of our buckle with 3 slots so you can run and lock your webbing down with ease
* We have this item built right here in the good ole USA!
Manta's belly pocket allows you fast and easy access when it is worn right down in the front of you
Fits all 2" wide webbing
Has 2 grommets for quick dainage
Velcro Closure with a easy to open front lip
Made from heavy duty denair material. This pocket is built to last
Pocket will hold many small items
The front pocket has a lease that is secured inside the pocket to allow you to affix an item as not to lose it during your dive
At the lower front you will also notice a velcro strip which allows you to affix any item that maybe using velcro for even quicker access let a Trilobite line cutter?
This pocket measures roughly: Just over 9" inches long / 6" inches tall / opens to around 2" inches
Our latest product now is for building your own sidemount harness!
Stop paying high prices for your sidemount hardware and take advantage of our low intro pricing going on right now!
Made with 1/8" thick stainless steel material to give you a very strong and durable piece
Built out of 304 marine grade stainless steel
This is both the upper and lower plates you need to start your own harness!
Please note that we built ours with roughly 12 feet of webbing so you can adjust your lengths from there being a person who dives with large to x-large Bc's and harness wing set-ups
These plates are ultra-smooth since we tumbe these for roughly 72 hours to give these larger plates a smooth edge.
We also make these plates right here in the good ole Usa!
Well Piranha keeps designing new products to help you in your diving with simple products at just low pricing!
These slide locking D-Rings have a low profile loop!
We added teeth to reduce any sliding once you locate the area you want these to be at! The teeth are made in such a way as to not damage your 2" inch webbing but keeps the D-ring from sliding
We added 2 size bungee holes from you to choose from! Either a 1/8" or 3/16" inch hole for your bungee
We included a 12" inch piece of bungee which you can select from our drop down boxes in either a 1/8 or 3/16" inch bungee cord!
We made these out of 304 marine grade stainless
1/8" inch thick stainless steel for durablity and to reduce any rust formations on your products!
We also tumble these for upto 48 hours to make them smooth with no rough edges to cut or damage your webbing
Dimensions:
Overall Width: 2 5/8" ....
Bungee hole sizes either 1/8" or 3/16" inch holes
Loop height: 15/16" inches
Overall Height: 1 3/4" inch
Slot: Made for 2" inch webbing
We build these right here in the U.S.A
You can select either a flat or slightly bent piece from our drop down box!
This pads helps if you have a harness and do not use a padded shoulder strap this will keep your webbing from rolling over or you can use this for holding your tanks in place on your cam straps!
This pad also helps when you are diving heavy cylinders you do not have the webbing cutting into your shoulders. Reduces shoulder pain and pressure. This is a flexible piece of rubber but still is harder then soft shoulder pads so please keep this in mind for your use
Picture of pad may differ since we get these from different manufacturers and are slightly different
This is a soft flexible rubber pad and you are purchasing a single pad so if you want or need 2 please order 2 of them
Our latest stamped out stainless steel piece uses a 2" inch wide slot to secure and a single pass through slot that will fit upto an 1 1/2" inch wide for better harness routing with the smaller webbing
All edges a super smooth so your webbing will not be damaged by running though the slots!
Our latest stamped out stainless steel piece uses a 2" inch wide slot to secure and a single pass through slot also 2" inches wide for better harness routing
All edges a super smooth so your webbing will not be damaged by running though the slots!
You can use this for many different rigging ideas!
You can also clip off with the lower area made for a snap to clip too!
Our holes work with 3/16 bungee and your piece comes with 1 foot of your color of bungee! Select from our drop down box for the color you want with your piece! It comes with 12 inches of 3/16 bungee
Works with 2" inch wide webbing
Made out of 304 stainless steel to reduce any rust formation on your piece
Our parts have been tumbled for 48 hours for a smooth finish to prevent any webbing damage!
Overall Length: 4 1/4" inches long / 1 1/2" ID Eye area / 7/16 gate opening!
This is the largest eye and with the butterfly slide makes it ideal for night diving, tec use and safety / rescue use! Using heavy gloves this slide is easy to open so no guessing even in murky waters!! This is a must try snap
Another perfect piece of hardware to define your dive rig
Made out of marine grade 304 stainless steel to reduce rusting
Our teeth are design to hold your webbing without damaging it
With the slight angle we give this d ring on both sides make clipping off a breeze! We take the time to produce a high quality product you will be pround of using on your dive rig.
Our hardware is tumbled for 48 hours giving the edges a smooth touch and feel plus doing this reduces the chance of your webbing being cut or damaged from our hardware!
We use 1/8" thick stainless allowing it to be lightweight yet still having enough strength for long term durability
We have a new Tec backplate made out of aluminum 5052
This high performance aluminum tec scuba diving back plate is lightweight and durable with high strength with strong corrosion resistant and wear-resistant
The outside edge "Perimeter" has 7/16" side holes for mounting lights, tank bottles, lift bags and other accessories
Has 3 slots to route cam straps for the best balance when diving with a single tank
Has 2 slots for crotch straps either 1" inch or you can use the wider slot for either 1 1/2" or 2" inch crotch straps
Using for doubles no problem with have 3 alignment holes near the top with a full open slot near the bottom so sliding your tanks bolts a as easy as 123!
Bult with a deep channel so your bolts will not stick you in your back! This plate is very comfortable to wear and a breeze to set-up your harness to it
Built for use with 2" inch wide webbing.
Specification:
- Material: High strength 5052 Aluminum
- Size (L x W): Approx. 39.7 x 26 cm/15.6 x 10.2 inch
- Net weight: around 500 gram / 17.6 Oz! / 1.2.0lbs
This piece of hardware allows you to move your hardware along your 2" inch / 50mm webbing either direction! You simply just lift the tab on either end to adjust your final place you want your hardware and your done
This hardware allows you to slide up or down and if you mount it on your sides well you can move forward or backwards. Gives you plently of options to test and try
You can use either D-rings or rings with this piece of hardware
You are purchasing just one "1" piece and not the D-ring or any hardware with this selection
We cut these with a marine grade 305 stainless steel and tumble them for 48 hours to give you all smooth edges and nothing sharp to damage your webbing
Our latest stoarge pocket has a 1' inch wide clip to slip over your 2" inch webbing to hold your pocket in place during your dive! When your done you just unsnap the top clip to quickly get out of your set up
We also have two 1" wide adjustable clips for your leg. Our 1' elestic webbing will confirm to your leg even while your suit decompresses it will stay right with you
Has a drainage grommet to quickly remove water and aid in faster drying
Our pocket uses velcro at the top to keep your pocket closed and hold your items inside safetly
We also have a 1" inch plastic D-Ring at the bottom to clip more items off plus and inside the cover 1" inch plastic D-Ring so you can use a lease on your special items
You can hold finger spools and other dive gear giving you more room to place items you may need during your dive!
The Deluxe Drop Dee is a clever, yet versatile, piece of stainless hardware that will enhance any diver's kit. With the ability to reposition the angled D-ring, the plate can be mounted on either horizontal webbing (waist) or vertical webbing (shoulder).
Many divers take compasses for granted, considering them just an accessory to an overall dive gauge console system. Trying to navigate with a poorly designed or improperly functioning compass can be one of diving's more frustrating events. This Extreme Tilt Hose Mount Compass is a dual-purpose compass. The convenient side window allows quick reference of large, easy-to-read bearing indicators on a luminescent display for gun-sight accuracy. Or, for divers who prefer relative navigation, the ratchet bezel can be rotated easily even with thick neoprene gloves.
The luminous dial of the compass is designed with a half black / half luminous graphic to make quick work of compass direction, especially in dim light. The dial rests on a precision bearing and incorporates extremely strong magnets for super quick response, tilt and accuracy. While the compass module itself is very compact, the housing has a large vertical interior allowing viewing angles that would stop other compasses in their tracks. The compass bezel has compass headings in 30 Degree numbered increments and indicator marks for every 10 Degree.
Bezel has twin heading indicators for alignment of compass course, and a lubber line across the compass face. This highly accurate US made GP03 liquid filled compass comes in a durable rubber boot with a hose mount nut that fits full size 0.5" (12mm) high pressure hoses.
Note: Like all of Piranha's Dive Products we warranty this item any from manufacturing defects!
Have an issue or question with this or any of our products please feel free to email us at Piranhadivemfg@yahoo.com
to get your question or issue answered.
These Items have a limited warranty for 12 months from date of purchase so always keep your invoice number to allow us to verify everything during this period.
So this little holder you can secure your hoses and route them so they are not hanging out all over the place
Secure your corrugated hose if you need to also
Place your Spg in a secure position and route the hose tightly to your set-up
Strong Nylon material making this durable in your diving applications
You can locate your EezyCut knife with the standard or even the flex harness in more ways and placing it where you can get to it quickly if needed too
With this tab you can now clean up your diving rig with so many things you can do well we just cannot list them all but you will surely find these little guys very helpful
Large 2" x 2" inch velcro to adjust to fit your rigging
Has a large 2"+ inches of none velcro area so you can use this almost anylace on your rig!When you lay this piece out it is 6 3/4" inches long
*Looking for no bump ties but only need a few? Well we sell them by the piece so you can get a few with a couple extra and not have to carry so many you will have them for a lifetime!
* Improve your diver's comfort & safety.
* Low profile and smooth with head height of .103in.
So we found these awesome little rubberize underwater ties for many uses on your dive rig! From securing hoses to locking down small clips these little guys are reusable so you can keep using them for different jobs on your rig
They are covered in a rubberized material to keep them from rusting. Just twist and hold your item down
These are 3" inches long
They are super strong for holding items that could be heavy
They come in 2 bright colors High viz Yellow and Safety Orange plus our tec black
Just order one when your placing an order and you will come back for more!!!
With continuous weave harnesses, it can often be difficult to tighten the shoulders by pulling on the waist straps. This is due to friction caused by the tortuous path that the webbing makes as it goes through the dual slots in the backplate.
This Slide Bar mounts on the back of the plate "Stainless or Alum", between the slots. The slick, rounded surface minimizes the friction and makes the waist straps easier to pull through. Plus with the raised edges it helps keep the webbing from wondering off and causing issues when you pull your harness to tighten it to your body
Place these near the bottom sides on the left and right webbing slots to make these work properly
The Hog 5lb Quick Release Weight Pocket is a simple and streamlined system for ditchable weight.
Capacity is up to 5lbs per pocket for a total of 10 Lbs for a set if purchased as a pair.
Weight is secured in the pocket using a low-profile 2-inch quick release buckle and with an internal pocket for holding soft or hard lead-weight.
You can slide onto any 2" inch webbing
If the diver needs to ditch weight in an emergency, it can be quickly released.
The pocket also has a D-Ring located on the bottom side for any quick clip on or off of items during your dive
You are purchasing ONE weight pocket and you can purchase a second one from our drop down box below
PLEASE READ:: Choose which pocket a left or right side one you want if your only one pocket from our drop down box below! If you are ordering two pockets we will make sure you get a left and rightside pocket for a pair!! Make sure to select which side you want if purchasing only one otherwise you can select to purchase a set from our drop down boxes below
Harness Accessories and Rigging Hardware
The rigging that turns a plate and webbing into your harness.
In this category: Adjustable Stainless Steel Camband with Cam Strap, Backplate Ring Nut (Pair), Hog Stainless Steel Backplate, Comfort Waist Pad Long Pair, Trim Weight Pockets Quick Attach Type, Tear Drop Open D-Ring w/ Teeth, New! Slider Hardware for Sidemount or Tec Use.
