Scuba Harness Accessories | D-Rings & Loops | Piranha Dive - pg. 2 including Single End Loop w/ Teeth Select FLAT or angled / Bent Designs

* Our newest end loops are cut with a waterjet

* Made out of stainless steel so you know these will be durable

* Our latest end loops now have webbing teeth to help reduce any movement on your webbing! Just enough bite but with non damaging teeth to your webbing.

* We tumble these for 48 hours giving us smooth edges! Nothing sharp to cut or damage your webbing

* These fit up to a 2" inch wide webbing!

* You now can choose from a flat, angled or 90 degree bent from our drop down box!

* This product is produced in the U.S.A!

* Dimensions:

- Overall Length: 3 3/8" inch long

- Overall Width: 7/8" inch

- Material Thickness: 1/8" inch

Our new backplate nuts come as a pair so you get 2 with this order

These are made out of delrin

1 1/4" overall head diameter

5/8" overall thickness

5/16" threading

Knurling around the outside edge for better gripping

You are purchasing a set of 2

So our newest piece of hardware just came in and if your looking for hanging items behind you well check out this piece!

Made of our stainless steel so you know salt or fresh water will not hurt it

1/8" Thick makes it durable

This is a straight mounting bracket with 2 large clip off loops on each side to better clear your back-side and makes it simply to find when reaching around

We made this with 4 slots so you can use 2 or 4 depending on what your diving and your needs

We have these tumbled for 48 hours giving them a smooth finish so as not to hurt your webbing thru the slot area

Overall length is roughly 6 3/4" inches

Loop Area is 1 7/8" long opening by 2 3/16" inches wide:: Inside measurement

Select flat or bent type from our drop down box below

We have these made in the good ole USA!

* Fits upto 2" inch wide webbing!

* This is what our sidemount divers have wanted for a while now! This has been designed and tested by sidemount instructors to get it just right

* Smooth slide area allowing you to adjust your loop

* Our new loop has an opening for you to slide your bungee onto this and have it secure during your dive! Works upto a 1/4" inch thick bungee

*NOTE: Make sure that when using this place the cut out slot facing insides towards you to better retain the bungee!

* Each Loop has a 3/4" inch opening for even the thickess webbing

* 1/8" inch thick makes this one strudy piece!

* Each piece has been tumbled to make it smooth so the edges are not sharp to handle or will not cut into your webbing!

* Made from stainless steel

*Heavy duty commercial grade built to lasts long and making it very durable

* Made in the USA!

• Check out Hog's tri-glide n the standard finish and check out some awesome features
• This is a brushed satin stainless steel material in a Black finish
• You can clip off on either side of this glide or use it on your waist strap and face the D position downwards for an easy gauge clip off
• The slots are wide enough to be able to slide 2 pieces of webbing through it or a simple slide into the right position then take a look this special tri-glide

• Check out Hog's tri-glide n the standard finish and check out some awesome features
• This is a brushed satin stainless steel material
• You can clip off on either side of this glide or use it on your waist strap and face the D position downwards for an easy gauge clip off
• The slots are wide enough to be able to slide 2 pieces of webbing through it or a simple slide into the right position then take a look this special tri-glide

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistance materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

The four outer holes fit a 3/16 bungee or latex tubing if you want

Overall Length: 3 3/16" inches

Width: 1 3/16" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

• Attach our ring nuts to the side of your backplate
• Comes with mounting hardware to attach to the backplate
• Good choice for attaching reels, spools or bag
• Good for when side-mounting off a back plate
• All Stainless Steel Construction
• You are purchasing a ONE single ring nut (1)

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistance materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

The four outer holes fit a 3/16 bungee or latex tubing if you want

Overall Length: 3 3/16" inches

Width: 1 3/16" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

So we here at Piranha just added more to our slip-on hardware to make your life easier

You can now add this piece onto a harness without removing everything off to slide on your new piece!

This will work with our 2" webbing soft "standard" or our stiffer webbing not a problem

We also tumbled these for 48 hours to give them an ultra soft edge and that will not cut or damage your webbing

We also added a couple of holes so you can add bungee / Latex tubing if you wish too! 1/8" on the smaller holes or 3/16" on the larger holes!

Made from marine grade 304 stainless steel so you know it will not rust for a longer life!

Overall Width: 3" Inches

End Loop Length ID" 1" inch

Thickness: 1/8" inch

Select from our drop down box below if you want your hardware with either a slight bend on the loop or a 90 degree bend on the loop

If you want the loop part to be on the leftside select Left and if you want the loop on the right you would select rightside. The loop is built to be as you look down when wearing it.

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistance materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

The four outer holes fit a 3/16 bungee or latex tubing if you want

Overall Length: 3 3/16" inches

Width: 1 3/16" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

This is a rectangle slot on one end to either use for a clip off or also a 1" inch chest strap piece

The rectangle end loop is roughly 1 1/4" ID with an overall length of1 3/8" inch 

We use a 304 marine grade stainless steel material for strength and durability

We tumble this hardware for 48 hours giving them smooth edges all around and nothing to cut your webbing!

Fits 1" inch webbing any thickness

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistance materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

The four outer holes fit a 3/16 bungee or latex tubing if you want

Overall Length: 3 3/16" inches

Width: 1 3/16" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistance materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

The four outer holes fit a 3/16 bungee or latex tubing if you want

Overall Length: 3 3/16" inches

Width: 1 3/16" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistance materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

The four outer holes fit a 3/16 bungee or latex tubing if you want

Overall Length: 3 3/16" inches

Width: 1 3/16" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistance materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

The four outer holes fit a 3/16 bungee or latex tubing if you want

Overall Length: 3 3/16" inches

Width: 1 3/16" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

• We use a rigid 2 inch 5mm stainless steel d-ring bent at a 45 degree angle
• This d-ring is tig wielded to our 2 inch wide slide with NO TEETH but uses a heavy duty tri-glide of 3mm thick! This is one tough d-ring with an even tougher tri-glide
• This angle allows you to clip off any item easy while diving
• We also use a slightly wider slot opening if you need it: 1/4" Slot opening
• Made from marine 316 grade stainless steel

• Quality stainless steel construction
• This new D-Ring we now have added a 3rd option for clipping to/from! We added a low profile D-ring at the bottom to allow for even more flexibility to your rig!!
• You can use this has a triple under the counterlung d-ring or slide it on your 2 inch crotch strap towards the rear and now you have a place to attach spools, reels or even Smb / liftbags and even more with the 3rd low profile rear D-ring!!!
• Fits 2 inch webbing... measures loop 2 inch "ID" w/ 1.5 inch long "ID"

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistance materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

The four outer holes fit a 3/16 bungee or latex tubing if you want

Overall Length: 3 3/16" inches

Width: 1 3/16" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistance materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

Expose this to your dive light or sun light and it will glow in the dark! On a boat for a night dive? Your dive harness you be easy to spot with these on

The four outer holes fit a 3/16 bungee or latex tubing

Overall Length: 3 3/16" inches

Width: 1 3/16" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistaned materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

You can also use these with any of our D-rings and if you use our slotted d-rings " Stainless or Aluminum" well you do not need to take your harness apart just slip on

Also if you look on one side we add webbing bumps this will reduce your webbing from sliding! Make sure the bumps are facing upwards for best results

This clip can do about anything you need on your dive harness. Just add some color so you know your dive harness from anybody else!

We also made our famous webbing slip on open slots so you do not need to remove or tear your harness down just slip it on and your ready to go. Works with our soft to stiff webbing not an issue

With our 3/16" bungee you can mount 1, 2, 3 or up to a 4lb hard weight When you secure your hard weight we also recommend you make your your knot on the backside is tight so the bungee will not move

The four outer holes fit a 3/16 bungee plus we include 4 feet of our marine grade bungee cord! We have this cord made for us to a high standard for strength and durability and this is also UV resistane

Overall Length: 2 7/8" inches

Width: 1 3/4" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistaned materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

You can also use these with any of our D-rings and if you use our slotted d-rings " Stainless or Aluminum" well you do not need to take your harness apart just slip on

Also if you look on one side we add webbing bumps this will reduce your webbing from sliding! Make sure the bumps are facing upwards for best results

This clip can do about anything you need on your dive harness. Just add some color so you know your dive harness from anybody else!

We also made our famous webbing slip on open slots so you do not need to remove or tear your harness down just slip it on and your ready to go. Works with our soft to stiff webbing not an issue

With our 3/16" bungee you can mount 1, 2, 3 or up to a 4lb hard weight When you secure your hard weight we also recommend you make your your knot on the backside is tight so the bungee will not move

The four outer holes fit a 3/16 bungee plus we include 4 feet of our marine grade bungee cord! We have this cord made for us to a high standard for strength and durability and this is also UV resistane

Overall Length: 2 7/8" inches

Width: 1 3/4" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistaned materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

You can also use these with any of our D-rings and if you use our slotted d-rings " Stainless or Aluminum" well you do not need to take your harness apart just slip on

Also if you look on one side we add webbing bumps this will reduce your webbing from sliding! Make sure the bumps are facing upwards for best results

This clip can do about anything you need on your dive harness. Just add some color so you know your dive harness from anybody else!

We also made our famous webbing slip on open slots so you do not need to remove or tear your harness down just slip it on and your ready to go. Works with our soft to stiff webbing not an issue

With our 3/16" bungee you can mount 1, 2, 3 or up to a 4lb hard weight When you secure your hard weight we also recommend you make your your knot on the backside is tight so the bungee will not move

The four outer holes fit a 3/16 bungee plus we include 4 feet of our marine grade bungee cord! We have this cord made for us to a high standard for strength and durability and this is also UV resistane

Overall Length: 2 7/8" inches

Width: 1 3/4" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

• We use a professional grade of nylon webbing which can be used for many applications
• Our blue webbing is a is a standard stiffness and our webbing is made to be more durable to outdoor weather environment making it last longer and works better on weight belts, harnesses and backstraps!
• Used for weightbelts and other applications!
• Specs
• Rated Tensile Strength 4,575 ?- 5% Lbs.
• Weight (oz/yd): 2.3 ?- .05
• Width: 1 15/16 ? 1/32
• Thickness .075?.005
• Picks: 31 ?- 1
• Marine grade quality "heavy duty"
• You are purchasing BLUE webbing
• No refund available once cut to order
• Price is by the foot!

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistaned materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

You can also use these with any of our D-rings and if you use our slotted d-rings " Stainless or Aluminum" well you do not need to take your harness apart just slip on

Also if you look on one side we add webbing bumps this will reduce your webbing from sliding! Make sure the bumps are facing upwards for best results

This clip can do about anything you need on your dive harness. Just add some color so you know your dive harness from anybody else!

We also made our famous webbing slip on open slots so you do not need to remove or tear your harness down just slip it on and your ready to go. Works with our soft to stiff webbing not an issue

With our 3/16" bungee you can mount 1, 2, 3 or up to a 4lb hard weight When you secure your hard weight we also recommend you make your your knot on the backside is tight so the bungee will not move

The four outer holes fit a 3/16 bungee plus we include 4 feet of our marine grade bungee cord! We have this cord made for us to a high standard for strength and durability and this is also UV resistane

Overall Length: 2 7/8" inches

Width: 1 3/4" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

• Our RED Webbing is now back in stock

  We use a professional grade of nylon webbing which can be used for many applications

• Our webbing is a on the softer stiff and is flexible
• This webbing is just softer in flex than our med stiff red webbing
• Used for weight belts and other applications
• Our webbing is made to be more durable for underwater use making it last longer and works better on weight belts, harnesses and backstraps!
• This webbing is design for marine use and will hold up very well with underwater use

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistaned materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

You can also use these with any of our D-rings and if you use our slotted d-rings " Stainless or Aluminum" well you do not need to take your harness apart just slip on

Also if you look on one side we add webbing bumps this will reduce your webbing from sliding! Make sure the bumps are facing upwards for best results

This clip can do about anything you need on your dive harness. Just add some color so you know your dive harness from anybody else!

We also made our famous webbing slip on open slots so you do not need to remove or tear your harness down just slip it on and your ready to go. Works with our soft to stiff webbing not an issue

With our 3/16" bungee you can mount 1, 2, 3 or up to a 4lb hard weight When you secure your hard weight we also recommend you make your your knot on the backside is tight so the bungee will not move

The four outer holes fit a 3/16 bungee plus we include 4 feet of our marine grade bungee cord! We have this cord made for us to a high standard for strength and durability and this is also UV resistane

Overall Length: 2 7/8" inches

Width: 1 3/4" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistaned materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

You can also use these with any of our D-rings and if you use our slotted d-rings " Stainless or Aluminum" well you do not need to take your harness apart just slip on

Also if you look on one side we add webbing bumps this will reduce your webbing from sliding! Make sure the bumps are facing upwards for best results

This clip can do about anything you need on your dive harness. Just add some color so you know your dive harness from anybody else!

We also made our famous webbing slip on open slots so you do not need to remove or tear your harness down just slip it on and your ready to go. Works with our soft to stiff webbing not an issue

With our 3/16" bungee you can mount 1, 2, 3 or up to a 4lb hard weight When you secure your hard weight we also recommend you make your your knot on the backside is tight so the bungee will not move

The four outer holes fit a 3/16 bungee plus we include 4 feet of our marine grade bungee cord! We have this cord made for us to a high standard for strength and durability and this is also UV resistane

Overall Length: 2 7/8" inches

Width: 1 3/4" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistaned materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

You can also use these with any of our D-rings and if you use our slotted d-rings " Stainless or Aluminum" well you do not need to take your harness apart just slip on

Also if you look on one side we add webbing bumps this will reduce your webbing from sliding! Make sure the bumps are facing upwards for best results

This clip can do about anything you need on your dive harness. Just add some color so you know your dive harness from anybody else!

We also made our famous webbing slip on open slots so you do not need to remove or tear your harness down just slip it on and your ready to go. Works with our soft to stiff webbing not an issue

With our 3/16" bungee you can mount 1, 2, 3 or up to a 4lb hard weight When you secure your hard weight we also recommend you make your your knot on the backside is tight so the bungee will not move

The four outer holes fit a 3/16 bungee plus we include 4 feet of our marine grade bungee cord! We have this cord made for us to a high standard for strength and durability and this is also UV resistane

Overall Length: 2 7/8" inches

Width: 1 3/4" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

• Our reinforced delrin cam buckle is a perfect replacement and now is in colors to get you more of a custom look!!
• You can adjust the strap by the stainless steel slider by the buckle
• Length of strap is approximately 35 inches long
• Velcro to secure your cylinder on your back
• NEW! We now have color buckles in Blue, Red and Yellow! Add more color to your rig and never get confused who's rig it is on the dive boat!!
• You get the color buckle that you choose! plus a 2" inch wide tank strap that you can adjust with the stainless steel slider you are supplied with also!!
• Does NOT come with a removable anti-slip pad! Since many cam straps have them we did not add this and keeping your costs lower!! You can order the slip pads from our drop down box below if you need them!

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistaned materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

You can also use these with any of our D-rings and if you use our slotted d-rings " Stainless or Aluminum" well you do not need to take your harness apart just slip on

Also if you look on one side we add webbing bumps this will reduce your webbing from sliding! Make sure the bumps are facing upwards for best results

This clip can do about anything you need on your dive harness. Just add some color so you know your dive harness from anybody else!

We also made our famous webbing slip on open slots so you do not need to remove or tear your harness down just slip it on and your ready to go. Works with our soft to stiff webbing not an issue

With our 3/16" bungee you can mount 1, 2, 3 or up to a 4lb hard weight When you secure your hard weight we also recommend you make your your knot on the backside is tight so the bungee will not move

The four outer holes fit a 3/16 bungee plus we include 4 feet of our marine grade bungee cord! We have this cord made for us to a high standard for strength and durability and this is also UV resistane

Overall Length: 2 7/8" inches

Width: 1 3/4" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

We are adding more colors to dress your rig so it is yours and stands out from the crownd! We made our universal tri-glide / Weight plate in a wide range of colors to choose from so we have you covered

So we use UV resistaned materials so no fading from the sun

Talk about strong we put these through all types of tests plus diving applications to make sure your getting a quality product that will last you for years to come

You can also use these with any of our D-rings and if you use our slotted d-rings " Stainless or Aluminum" well you do not need to take your harness apart just slip on

Also if you look on one side we add webbing bumps this will reduce your webbing from sliding! Make sure the bumps are facing upwards for best results

This clip can do about anything you need on your dive harness. Just add some color so you know your dive harness from anybody else!

We also made our famous webbing slip on open slots so you do not need to remove or tear your harness down just slip it on and your ready to go. Works with our soft to stiff webbing not an issue

With our 3/16" bungee you can mount 1, 2, 3 or up to a 4lb hard weight When you secure your hard weight we also recommend you make your your knot on the backside is tight so the bungee will not move

The four outer holes fit a 3/16 bungee plus we include 4 feet of our marine grade bungee cord! We have this cord made for us to a high standard for strength and durability and this is also UV resistane

Overall Length: 2 7/8" inches

Width: 1 3/4" inches

Thickness: 3/16" inch

Fits any 2" inch wide webbing

We have tested our bracket to make sure that it will hold up during the roughest diving conditions some of us face

You also can select from our colors listed below and receive 3 feet to work your magic

• NOTE: The webbing is a dark navy blue just a little darker then our picture is showing! Be aware!!
• We use a professional grade of nylon webbing which can be used for many applications
• Our webbing is a little stiffer than most webbings and made to be more durable to outdoor weather environment making it last longer and works better on weight belts, harnesses and backstraps!
• Specs
• Rated Tensile Strength 4,575 ?- 5% Lbs.
• Weight (oz/yd): 2.3 ?- .05
• Width: 1 15/16 ? 1/32
• Thickness .075?.005
• Picks: 31 ?- 1
• Marine grade quality "heavy duty"
• You are purchasing BLUE webbing
• No refund available once cut to order
• Price is by the foot!

• We use a professional grade of nylon webbing which can be used for many applications
• This webbing is a little stiffer than our medium Stiff black webbing and this is for divers looking for just a little more stiffness! This is our stiffest
• Our webbing is a little stiffer than most webbing and made to be more durable to outdoor weather environment making it last longer and works better on weight belts, harnesses and backstraps!
• Specs
• Rated Tensile Strength 4,575 +/- -5% Lbs.
• Weight (oz/yd): 2.3 +/- -.05
• Width: 1 15/16 +/- 1/32
• Thickness .075+/- .005
• Picks: 31 +/- -1
• Marine grade quality " Extra-heavy duty"
• You are purchasing BLACK webbing
• No refund available once cut to order
• Price is by the foot!

• We use a professional grade of nylon webbing which can be used for many applications
• Our webbing is a little stiffer than most webbing and made to be more durable to outdoor weather environment making it last longer and works better on weight belts, harnesses and backstraps!
• Specs
• Rated Tensile Strength 4,575 +/- -5% Lbs.
• Weight (oz/yd): 2.3 +/- -.05
• Width: 1 15/16 +/- 1/32
• Thickness .075+/- .005
• Picks: 31 +/- -1
• Marine grade quality "heavy duty"
• You are purchasing BLACK webbing
• No refund available once cut to order
• Price is by the foot!

• Our RED Webbing is now back in stock

  We use a professional grade of nylon webbing which can be used for many applications

• Our webbing is a on the medium stiff and is still flexible
• Our webbing is made to be more durable for underwater use making it last longer and works better on weight belts, harnesses and backstraps!
• Specs
• Rated Tensile Strength 4,575 ?- 5% Lbs.
• Weight (oz/yd): 2.3 ?- .05
• Width: 1 15/16 ? 1/32
• Thickness .075?.005
• Picks: 31 ?- 1
• Marine grade quality "heavy duty"
• You are purchasing RED webbing
• No refund available once cut to order
• Price is by the foot!

• We use a professional grade of nylon webbing which can be used for many applications
• Our webbing is a little stiffer than most webbings and made to be more durable to outdoor weather environment making it last longer and works better on weight belts, harnesses and backstraps!
• Specs
• Rated Tensile Strength 4,575 ?- 5% Lbs.
• Weight (oz/yd): 2.3 ?- .05
• Width: 1 15/16 ? 1/32
• Thickness .075?.005
• Picks: 31 ?- 1
• Marine grade quality "heavy duty"
• You are purchasing Neon Pink webbing
• No refund available once cut to order
• Price is by the foot!

We now are offering our newest item of weight belts

Length is 60" inches long

We use our stainless steel weight belt buckle

• We use a professional grade of nylon webbing which can be used for many applications
• Our blue webbing is a is a slightly stiffer webbing and our webbing is made to be more durable to outdoor weather environment making it last longer and works better on weight belts, harnesses and backstraps!
• Specs
• Rated Tensile Strength 4,575 ?- 5% Lbs.
• Weight (oz/yd): 2.3 ?- .05
• Width: 1 15/16 ? 1/32
• Thickness .075?.005
• Picks: 31 ?- 1
• Marine grade quality "heavy duty"
• You are purchasing BLUE webbing which is slightly darker then our blue standard webbing!
• No refund available once cut to order
• Price is by the foot!

• We use a professional grade of nylon webbing which can be used for many applications
• Our webbing is a little stiffer than most webbing and made to be more durable to outdoor weather environment making it last longer and works better on weight belts, harnesses and backstraps!
• Specs
• Rated Tensile Strength 4,575 +/- -5% Lbs.
• Weight (oz/yd): 2.3 +/- -.05
• Width: 1 15/16 +/- 1/32
• Thickness .075+/- .005
• Picks: 31 +/- -1
• Marine grade quality "heavy duty"
• You are purchasing High Viz Green webbing
• No refund available once cut to order
• Price is by the foot!

• Our stainless steel weight belt keeper has the following
• Teeth to hold the keeper in place even with holding weights in place during a dive
• Large D' ring that allows you to clip off accessories or other items
• D' ring is low profile with a height of 1" off the base of the keeper

• Our stainless steel weight belt keeper has the following
• Teeth to hold the keeper in place even with holding weights in place during a dive
• Large D' ring that allows you to clip off accessories or other items
• D' ring is higher profile with a height of 1 3/4" off the base of the keeper

• So we finally have them in! Our Stealth black powder coated hardware is tough and very durable. These are the same bent d-ring with stainless steel under our tough black powder coating! Welcome to our stealth series of hardware

• Our sliders are made for us and are made to our specs which allows us to make these a heavy duty style! These will not bend or twist like the thinner ones most retailers sell!
• Stainless Steel Slide w/ no teeth and black powder coating over them
• Made from high quality stainless material underneath
• 2" width
• Great for locking items on your harness
• 304 Grade Stainless Steel under the tough black powder coating!

• Looking for a heavy duty D-ring that is bent? Try our 6mm which is slightly heavier than our 5mm D-rings!
• Wire size is 6MM
• Fits all 2 inch webbing
• Made from high quality stainless steel
• A must have item for divers looking to find or attach an item where you cannot see and must use feel!

• We use a stainless steel butterfly snap along with 1 inch webbing to create this piece
• We use stainless because of its durability and resists rust formation
• Large latch finger allows a diver to open this snap underwater in low viz conditions very easy
• The webbing loop allows you to slip 2" inch thru the loop if needed!

• Our sliders are made for us and are made to our specs which allows us to make these a heavy duty style! These will not bend or twist like the thinner ones most retailers sell!
• Stainless Steel Slide w/teeth
• Made from high quality stainless material
• 2" width
• This slider has the raised center bar divers like to have! Allows you to move thicker webbing easy slot the slots
• Great for locking items on your harness
• 304 Grade Stainless Steel

• Our reinforced delrin cam buckle is a perfect replacement
• You can adjust the strap by the stainless steel slider by the buckle
• Length of strap is approximately 35 inches long
• Velcro to secure your cylinder on your back
• Does NOT come with a removable anti-slip pad! Since many cam straps have them we did not add this and keeping your costs lower!! You can order the slip pads from our drop down box below if you need them!

• Stainless Steel camband
• We build these using a 2" inch slider which allows you to adjust your final overall length..
• Use for securing your cylinder
• Strap length is 35 1/5" long by 2" wide roughly!
• Has velcro to hold strap in place
• Adds roughly 1 pound per camband. You can remove lead-weight off your belt!
• Our cam straps are adjustable! We use a 2 inch SS slider which allows you to fit a large cylinder to a small pony bottle with the same strap!
• You are purchasing one (1) camband. If you require two (2) please adjust your qty.

  Does NOT come with a removable anti-slip pad! Since many cam straps have them we did not add this and keeping your costs lower!! You can order the slip pads from our drop down box below if you need them!