Our newest item is our easy grip with our larger finger post to open the gate area of this swivel. Our larger finger post makes finding it in the dark, murky or wearing thicker gloves a breeze! We even have small grooves on the top side of this finger post to get even a better grip then ever before.
This double ender is made of 316 stainless steel
This double ender has a slight downward angle on the contact slides!
Has large gate opening 9/16" inches
Easy to open with our easy grip lips with topside grooves giving you even more aid when opening the gate
Another great item for night diving, murky water conditions, cave or wreck divers or even rescue divers needing to quickly clip off!
Our newest item is our easy grip with our larger finger post to open the gate area of this swivel. Our larger finger post makes finding it in the dark, murky or wearing thicker gloves a breeze! We even have small grooves on the top side of this finger post to get even a better grip then ever before.
We use our easy grip lip to start with to make opening a breeze
Great for wreck and cave divers but also night or rescue divers have a large eye loop with a quicker lip to find during those times you need to deploy quickly
Overall length: 4 1/8" inch
316 Stainless Steel material
Gate Opening: 9/16" inch
Eye Loop is made with the larger part near the top and the smaller part near the bottom side of the eye loop. Refer to our picture for dimensions
Our newest item is our easy grip with our larger finger post to open the gate area of this swivel. Our larger finger post makes finding it in the dark, murky or wearing thicker gloves a breeze! We even have small slots on the top side of this finger post to get even a better grip then ever before.
This swivel is made from 316 stainless steel giving you the best rust protection
We have a good size loop with the inside diameter measuring roughly 1" inch
Overall length is roughly 3 3/4" inches
Our gate opening is roughly 1/2" inch which is a slightly larger then standard swivels
Great for use in either salt or fresh water! This is a must use for tec divers
Uses the easy to open the butterfly snap! Wearing heavy gloves? night diving? using the butterfly snap makes opening the clip a snap while busy doing other things in the water!!
Our latest Deco pocket has a 1' inch wide clip to slip over your 2" inch webbing to hold your pocket in place during your dive! When your done you just unsnap the top clip to quickly get out of your set up
We also have two 1" wide adjustable clips for your leg. Our 1' elestic webbing will confirm to your leg even while your suit decompresses it will stay right with you
Our pocket uses velcro at the top to keep your pocket closed and hold your items inside safetly plus we have a small zippered front pocket to hold smaller items securely
We also have a 1" inch plastic D-Ring at the bottom to clip more items off
You can hold finger spools and other divve gear giving you more room to place items you may need during your dive!
Dimensions are roughly for the main pocket
6 3/4" inches long
5" inches wide
1 1/2" inches deep / Thick
Small front zipped pocket is a triangle shape
3 1/2" inches wide bottom / 1" inch across the top
We are calling these oyster Boxes that will protect your gear from damage during transist or on a dive boat!
These padded cases are thermoformed and thus making them shockproof from the stiffness they give your computers, watches, gauges, lights and other equipment
These are also lightweight! Perfect if your traveling and need to protect your big $$ dive gear
The oval design allows you to place items inside with its thermoformed walls
We are calling these oyster Boxes that will protect your gear from damage during transist or on a dive boat!
These padded cases are thermoformed and thus making them shockproof from the stiffness they give your computers, watches, gauges, lights and other equipment
These are also lightweight! Perfect if your traveling and need to protect your big $$ dive gear
The oval design allows you to place items inside with its thermoformed walls
Overall Length: 4 1/4" inches long / 1 1/2" ID Eye area / 7/16 gate opening!
This is the largest eye and with the butterfly slide makes it ideal for night diving, tec use and safety / rescue use! Using heavy gloves this slide is easy to open so no guessing even in murky waters!! This is a must try snap
Piranha has come up with a another travel backplate with an easy carry handle!
This plate comes with multiple slots so you can vary your adjustments on your harness
Dual rail slots on the back to hold your your cylinder
Rear rail slots on the back align the cylinder and make this plate very stiff!
Made for diving with a single cylinder but can be used with doubles also! Has the hardware holes for doubles use!!
This tough and very durable backplate will last years od service and your back will thank you for lightening the load
This backplate comes with harness and be ready to go! You just need to add a tank cam strap to slip on and ready to go!
***Our standard harness included with this plastic heavy duty backplate includes item below!
** Soft black 2" inch wide webbing for a comfort fit
** Stainless steel buckle and 3 6mm straight D-rings with slides
** Stainless steel buckle!
** The harness is already been built so no guess work just add a tank cam strap. If you have one then just order this kit if not go check out our different type to see which one best fits your needs
This kit comes with the basic DSS opv and the outer hex nut!
Large diameter kernmantle pull cord!
The larger pull cord is easier to grasp for use
DSS made this opv with a hole large enough to use the larger cord without interference
As in a large diameter 3mm Kernmantle Pull Cord?
Most Standard OPVs are furnished with thin cords and plastic pull knobs.
To reduce entanglements and inadvertant wing venting many divers remove the plastic pull or toggle and add a longer pull cord.
The larger diameter cords are much easier to grasp and use, particularly with gloves.
There are two problems with changing to a larger cord. Standard OPVs are not designed to use larger cords. The holes in the Outer Cage and inner seat retainer are too small and have to be drilled out, and the available space in the inner seat retainer is too small to accomodate the inner knot on the pull cord.
The first problem is easily solved, just drill out the plastic parts. The second problem, too small a recess for the inner nut is not.
Some will try to fit a large knot in a small recess by heating and melting the knot. This had resulted in failures of the pull cord.
The DSS Solution was to redesign the inner seat retainer to accomodate a larger knot. This redesigned seat retainer also requires a new OPV CAGE or outer cover because the new seat retainer is taller.
The DSS OPV kit includes the new Outer Cage, SS Spring, 3mm and Kernmantle pull cord, inner seat Retainer and Soft Seat. The soft seat is made of a thermoplastic elastomer, all other molded parts are Delrin.
*** Wings with three piece threaded through fittings will also require a DSS Hex outer or Double nut.
Here is one of our finger spools but with NEW FLAT LINE in smaller width yellow flat line taking up less space on your finger spool!
This finger spool also has Black line as a line leader to start going to our commercial Stainless steel line swivel!
This spool comes with our special stainless steel line swivel to reduce any line twisting during your dive!!
Smooth center finger hole " 1" inch!
With Piranha Dive you pay for only what you need! We sell our hard anodized aluminum finger spools WITHOUT any clip allowing you to choose the one that best suits your needs or using one you have!
Want a different clip? Select a Stainless Steel or Brass double ender? We offer many choices at a special price which completes this product for use in the harshest diving conditions you may be diving in!
With our hard anodized aluminum spool their is no rust formation
Dimensions: 2 11/16" inch diameter / 1 5/8" inch wide with a 1" inch finger hole
If you need a double ender we have you also covered with many choices from our drop down box!!!
Here is one of our finger spools but with NEW FLAT LINE in smaller width yellow line taking up less space on your finger spool!
This finger spool also has Black line as a line leader to start going to our commercial Stainless steel line swivel!
This spool comes with our special stainless steel line swivel to reduce any line twisting during your dive!!
Smooth center finger hole " 1" inch!
With Piranha Dive you pay for only what you need! We sell our hard anodized aluminum finger spools WITHOUT any clip allowing you to choose the one that best suits your needs or using one you have!
Want a different clip? Select a Stainless Steel or Brass double ender? We offer many choices at a special price which completes this product for use in the harshest diving conditions you may be diving in!
With our hard anodized aluminum spool their is no rust formation
Dimensions: 2 11/16" inch diameter / 1 5/8" inch wide with a 1" inch finger hole
If you need a double ender we have you also covered with many choices from our drop down box!!!
Here is one of our finger spools but with NEW FLAT LINE in smaller width yellow line taking up less space on your finger spool!
This finger spool also has Black line as a line leader to start going to our commercial Stainless steel line swivel!
This spool comes with our special stainless steel line swivel to reduce any line twisting during your dive!!
Smooth center finger hole " 1" inch!
With Piranha Dive you pay for only what you need! We sell our hard anodized aluminum finger spools WITHOUT any clip allowing you to choose the one that best suits your needs or using one you have!
Want a different clip? Select a Stainless Steel or Brass double ender? We offer many choices at a special price which completes this product for use in the harshest diving conditions you may be diving in!
With our hard anodized aluminum spool their is no rust formation
Dimensions: 2 11/16" inch diameter / 1 5/8" inch wide with a 1" inch finger hole
If you need a double ender we have you also covered with many choices from our drop down box!!!
Here is one of our finger spools but with NEW FLAT LINE in smaller width ORANGE line taking up less space on your finger spool!
This finger spool also has Black line as a line leader to start going to our commercial Stainless steel line swivel!
This spool comes with our special stainless steel line swivel to reduce any line twisting during your dive!!
Smooth center finger hole " 1" inch!
With Piranha Dive you pay for only what you need! We sell our hard anodized aluminum finger spools WITHOUT any clip allowing you to choose the one that best suits your needs or using one you have!
Want a different clip? Select a Stainless Steel or Brass double ender? We offer many choices at a special price which completes this product for use in the harshest diving conditions you may be diving in!
With our hard anodized aluminum spool their is no rust formation
Dimensions: 2 11/16" inch diameter / 1 5/8" inch wide with a 1" inch finger hole
If you need a double ender we have you also covered with many choices from our drop down box!!!
Here is one of our finger spools but with NEW FLAT LINE in smaller width YELLOW line taking up less space on your finger spool!
This finger spool also has Black line as a line leader to start going to our commercial Stainless steel line swivel!
This spool comes with our special stainless steel line swivel to reduce any line twisting during your dive!!
Smooth center finger hole " 1" inch!
With Piranha Dive you pay for only what you need! We sell our hard anodized aluminum finger spools WITHOUT any clip allowing you to choose the one that best suits your needs or using one you have!
Want a different clip? Select a Stainless Steel or Brass double ender? We offer many choices at a special price which completes this product for use in the harshest diving conditions you may be diving in!
With our hard anodized aluminum spool their is no rust formation
Dimensions: 2 11/16" inch diameter / 1 5/8" inch wide with a 1" inch finger hole
If you need a double ender we have you also covered with many choices from our drop down box!!!
Here is one of our finger spools but with NEW FLAT LINE in smaller width Orange line taking up less space on your finger spool!
This finger spool also has Black line as a line leader to start going to our commercial Stainless steel line swivel!
This spool comes with our special stainless steel line swivel to reduce any line twisting during your dive!!
Smooth center finger hole " 1" inch!
With Piranha Dive you pay for only what you need! We sell our hard anodized aluminum finger spools WITHOUT any clip allowing you to choose the one that best suits your needs or using one you have!
Want a different clip? Select a Stainless Steel or Brass double ender? We offer many choices at a special price which completes this product for use in the harshest diving conditions you may be diving in!
With our hard anodized aluminum spool their is no rust formation
Dimensions: 2 11/16" inch diameter / 1 5/8" inch wide with a 1" inch finger hole
If you need a double ender we have you also covered with many choices from our drop down box!!!
Here is one of our finger spools but with NEW FLAT LINE in smaller width YELLOW line taking up less space on your finger spool!
This finger spool also has Black line as a line leader to start going to our commercial Stainless steel line swivel!
This spool comes with our special stainless steel line swivel to reduce any line twisting during your dive!!
Smooth center finger hole " 1" inch!
With Piranha Dive you pay for only what you need! We sell our hard anodized aluminum finger spools WITHOUT any clip allowing you to choose the one that best suits your needs or using one you have!
Want a different clip? Select a Stainless Steel or Brass double ender? We offer many choices at a special price which completes this product for use in the harshest diving conditions you may be diving in!
With our hard anodized aluminum spool their is no rust formation
Dimensions: 2 11/16" inch diameter / 1 5/8" inch wide with a 1" inch finger hole
If you need a double ender we have you also covered with many choices from our drop down box!!!
Here is one of our finger spools but with NEW FLAT LINE in smaller width ORANGE line taking up less space on your finger spool!
This finger spool also has Black line as a line leader to start going to our commercial Stainless steel line swivel!
This spool comes with our special stainless steel line swivel to reduce any line twisting during your dive!!
Smooth center finger hole " 1" inch!
With Piranha Dive you pay for only what you need! We sell our hard anodized aluminum finger spools WITHOUT any clip allowing you to choose the one that best suits your needs or using one you have!
Want a different clip? Select a Stainless Steel or Brass double ender? We offer many choices at a special price which completes this product for use in the harshest diving conditions you may be diving in!
With our hard anodized aluminum spool their is no rust formation
Dimensions: 2 11/16" inch diameter / 1 5/8" inch wide with a 1" inch finger hole
If you need a double ender we have you also covered with many choices from our drop down box!!!
Here is one of our finger spools but with NEW FLAT LINE in smaller width orange line taking up less space on your finger spool!
This finger spool also has Black line as a line leader to start going to our commercial Stainless steel line swivel!
This spool comes with our special stainless steel line swivel to reduce any line twisting during your dive!!
Smooth center finger hole " 1" inch!
With Piranha Dive you pay for only what you need! We sell our hard anodized aluminum finger spools WITHOUT any clip allowing you to choose the one that best suits your needs or using one you have!
Want a different clip? Select a Stainless Steel or Brass double ender? We offer many choices at a special price which completes this product for use in the harshest diving conditions you may be diving in!
With our hard anodized aluminum spool their is no rust formation
Dimensions: 2 11/16" inch diameter / 1 5/8" inch wide with a 1" inch finger hole
If you need a double ender we have you also covered with many choices from our drop down box!!!
So we now have a cutting tool that will just keep cutting with a ceramic blade! Comes with a pouch that you can mount with any 2" inch / 50mm webbing so place on webbing your store in your pocket with its small compact size
Ceramic is the 2nd hardest material which makes it an awesome material for a cutting blade. You may never need to replace the blade but if you do we do have spares you can purchase as a back-up. With using a ceramic blade it never rusts and since ceramic is not a porous material it is less likely to correct dirt or grime while diving! We do recommend that you just do a quick rinse after your dive just to keep your cutter in tip top shape
Our cutter is secured by velcro inside a pouch plus we have a 1" inch plastic d-ring at the end of 1" webbing to quickly remove your cutter for quick use! Cut line or webbing in a breeze with our cutter
If down the road in do need to replace a blade because it is damaged or lossing some of its cutting edge you simply remove 2 stainless steel screws and insert a new blade
Our single cutting edge will not allow your finger or hoses to get caught up with being cut since it uses a narrow channel to cut with. The cutting channel is rough;y 7/16" inches
The webbing lease is roughly 3" inches long and add the 1" inch d-ring for a total of 3 1/2" inches
We have a large 1" opening by 1 1/4" inches wide for your fingers if you wish to get into the cutter holder or if your using thicker gloves just hold it with the webbing lease
This is a small compact and lightweight cutter great for many uses but a diver must have since line is always around wrecks and any area folks are fishing!
If you really want a spare blade purchase from our drop down but we are telling you this blade will hold its edge. The only thing is it could gets damage so if your on a dive trip or away from home is really the only time to consider a spare blade!
So we now have a cutting tool that will just keep cutting with a ceramic blade! Comes with a pouch that you can mount with any 2" inch / 50mm webbing so place on webbing your store in your pocket with its small compact size
Ceramic is the 2nd hardest material which makes it an awesome material for a cutting blade. You may never need to replace the blade but if you do we do have spares you can purchase as a back-up. With using a ceramic blade it never rusts and since ceramic is not a porous material it is less likely to correct dirt or grime while diving! We do recommend that you just do a quick rinse after your dive just to keep your cutter in tip top shape
Our cutter is secured by velcro inside a pouch plus we have a 1" inch plastic d-ring at the end of 1" webbing to quickly remove your cutter for quick use! Cut line or webbing in a breeze with our cutter
If down the road in do need to replace a blade because it is damaged or lossing some of its cutting edge you simply remove 2 stainless steel screws and insert a new blade
Our single cutting edge will not allow your finger or hoses to get caught up with being cut since it uses a narrow channel to cut with. The cutting channel is rough;y 7/16" inches
The webbing lease is roughly 3" inches long and add the 1" inch d-ring for a total of 3 1/2" inches
We have a large 1" opening by 1 1/4" inches wide for your fingers if you wish to get into the cutter holder or if your using thicker gloves just hold it with the webbing lease
This is a small compact and lightweight cutter great for many uses but a diver must have since line is always around wrecks and any area folks are fishing!
If you really want a spare blade purchase from our drop down but we are telling you this blade will hold its edge. The only thing is it could gets damage so if your on a dive trip or away from home is really the only time to consider a spare blade!
So we now have a cutting tool that will just keep cutting with a ceramic blade!
Comes with a pouch that you can mount with any 2" inch / 50mm webbing so place on webbing your store in your pocket with its small compact size
Ceramic is the 2nd hardest material which makes it an awesome material for a cutting blade.
You may never need to replace the blade but if you do we do have spares you can purchase as a back-up.
With using a ceramic blade it never rusts and since ceramic is not a porous material it is less likely to correct dirt or grime while diving!
We do recommend that you just do a quick rinse after your dive just to keep your cutter in tip top shape
Our cutter is secured by velcro inside a pouch plus we have a 1" inch plastic d-ring at the end of 1" webbing to quickly remove your cutter for quick use! Cut line or webbing in a breeze with our cutter
If down the road in do need to replace a blade because it is damaged or lossing some of its cutting edge you simply remove 2 stainless steel screws and insert a new blade
Our single cutting edge will not allow your finger or hoses to get caught up with being cut since it uses a narrow channel to cut with. The cutting channel is rough;y 7/16" inches
The webbing lease is roughly 3" inches long and add the 1" inch d-ring for a total of 3 1/2" inches
We have a large 1" opening by 1 1/4" inches wide for your fingers if you wish to get into the cutter holder or if your using thicker gloves just hold it with the webbing lease
This is a small compact and lightweight cutter great for many uses but a diver must have since line is always around wrecks and any area folks are fishing!
If you really want a spare blade purchase from our drop down but we are telling you this blade will hold its edge. The only thing is it could gets damage so if your on a dive trip or away from home is really the only time to consider a spare blade!
This is one of our newer long 2nd stage regulator shut offs
Thread size is a 9/16F to 9/16M
On/Off Swift Adapter For ST Regulator Hose
Stops free flows
Great for back up regulators
Goes inline between the regulator and your low pressure hose!
Helps prevent air loss through second stages
This model works well in colder water conditions where heavier gloves are needed. When using 3 mil or thicker this shut off valve is an excellent choice
Overall length is 2 7/8"
This part is NITROX READY right out of the packaging!
You can use this stainless steel loop clamp for a variety of applications. It has a rubber protector to keep your equipment that you are attaching to from abrasion.
You can clip your extra gear such as lights or clips to your BC. It can clip to your your tank strap, your photography or video equipment. The uses are endless
*Is in a large diameter 3mm Kernmantle Pull Cord? *Most Standard OPVs are furnished with thin cords and plastic pull knobs.
*To reduce entanglements and inadvertant wing venting many divers remove the plastic pull or toggle and add a longer pull cord. *The larger diameter cords are much easier to grasp and use, particularly with gloves.
**There are two problems with changing to a larger cord. Standard OPVs are not designed to use larger cords. The holes in the Outer Cage and inner seat retainer are too small and have to be drilled out, and the available space in the inner seat retainer is too small to accomodate the inner knot on the pull cord.
**The first problem is easily solved, just drill out the plastic parts. The second problem, too small a recess for the inner nut is not.
**Some will try to fit a large knot in a small recess by heating and melting the knot. This had resulted in failures of the pull cord.
**The DSS Solution was to redesign the inner seat retainer to accomodate a larger knot. This redesigned seat retainer also requires a new OPV CAGE or outer cover because the new seat retainer is taller.
**The DSS OPV kit includes the new Cage, SS Spring, 3mm x 5 inch Kernmantle pull cord, inner seat Retainer and Soft Seat. The soft seat is made of a thermoplastic elastomer, all other molded parts are Delrin.
*** Wings with three piece threaded through fittings will also require a DSS Hex outer or Double nut. You can order the hex nut if you need it in our drop down box!
9/16"-18 Male (Connects to a standard regulator hose) with a quick connect on the other side that works with either the locking or non-locking OmniSwivel Seaquest quick release adapters
Details:
Female QD has lock built into sleeve. Once connected, rotate the sleeve counter-clockwise 90deg to engage the lock.
This adapter works with the OmniSwivel QDYF-S adapter whic you can also purchase from us! "Refer to item: Non-Locking or Locking SeaQuest Quick Release High Flow Adapter Set"
This fits any 2" inch Webbing to place the pocket on or you can glue this pocket on just be aware you would need to do a little work! It has a stiff backing
Drainage Grommet
Built with 420 Denier material for durability and long life
We have a deluxe spaious utility pocket that will hold your diving accessories
Inside this pocket we have an 18" / 46cm bungee loop so you can easly clip off any diving accessories you need to without worring about dropping them into the deep
This pocket is made out of 1000D nylon for durability
Our pocket offers several mounting option from clipping off on the stainless d-rings or using the quick attach velcro to your 2" inch / 50mm webbing. The bonus is with the velcro flaps is easy to set up your rig and you do not have to take apart your whole rig to get it on! Worry about it slidding around? Well purchase 2 of our pocket holding clips and it will stay where you place it!
A drainage grommet located at the bottom to quickly remove any water in the pocket
This pocket is extra wide so you could finger spools or small reels!
Having a surface marker buoy (SMB) or lift bag along on a dive can come in real handy when things do not come out as planned.
Divers know that a surface marker buoy is either required by most professional dive operations for safety or having one is a very safe ideal
So having a pocket while diving is not an option, but really a requirement from a safety stand point.
Lift bags are great to have when you find something you need to retrieve from below and want a safe and dependable means to bring it back to the boat or beach.
Our mesh carry pouch is a convenient pouch to store your Smb or lift bag so it may be used for those just in time needs,
Our mesh carry pouch will accommodate our smb's "Not our 10 footer!" and small size liftbags "Not like 100+ lift ones would be tight" plus other manufactures buoys and bags.
Our mesh carry pouch is made from heavy-duty PVC coated nylon mesh with a full-length side opening using a hook and loop closure to secure your item and still being able to deploy.
Our pouch has 5 stainless-steel grommet holes for attachment of the pouch to your gear (mounting hardware not included) and measures 6.5" x 12" (16.5cm x 30.5cm).
Rounded edges make sure their is not sharp areas to cut or damage any dive gear!
If your using for sidemount diving you can use these as a rear mounting point for bungee loops or secure your canister light with this great little product
This pointer has a overall length of 13 1/4" inches
Comes with a Pink color round low profile adjustable lanyard attached by a stainless steel split ring
Has up to 10" CM graduation marks on the bar
Pointer is made out of aluminum T6061 / 8.0 mm diameter and is anodized
You can use as a pointer, tickle stick or keeping off or away from objects in your dive. We use these in the copper river to lock us to the bottom of the faster moving current! Great for that also
oClip constructed of corrosion resistant 316 stainless steel
oHelps control air cell deflation to reduce drag and optimize trim
The IST Dolphin Tech Side Mount Bungee with Stainless Steel Clip is designed for use with side mount diving rigs. Attach the bungee over your air cell to ensure it deflates evenly and compresses as it deflates.
Constructed of tough rubber, the bungee is 19.7 inches (50cm) and includes a 1.5 Inch (4cm) 316 stainless steel quick clip with screw down closure at one end.
Keep a couple spares in your gear bag and be ready for your next cave or wreck adventure.
So we now have a cutting tool that will just keep cutting with a ceramic blade! Comes with a pouch that you can mount with any 2" inch / 50mm webbing so place on webbing your store in your pocket with its small compact size
Ceramic is the 2nd hardest material which makes it an awesome material for a cutting blade. You may never need to replace the blade but if you do we do have spares you can purchase as a back-up. With using a ceramic blade it never rusts and since ceramic is not a porous material it is less likely to correct dirt or grime while diving! We do recommend that you just do a quick rinse after your dive just to keep your cutter in tip top shape
Our cutter is secured by velcro inside a pouch plus we have a 1" inch plastic d-ring at the end of 1" webbing to quickly remove your cutter for quick use! Cut line or webbing in a breeze with our cutter
If down the road in do need to replace a blade because it is damaged or lossing some of its cutting edge you simply remove 2 stainless steel screws and insert a new blade
Our single cutting edge will not allow your finger or hoses to get caught up with being cut since it uses a narrow channel to cut with. The cutting channel is rough;y 7/16" inches
The webbing lease is roughly 3" inches long and add the 1" inch d-ring for a total of 3 1/2" inches
We have a large 1" opening by 1 1/4" inches wide for your fingers if you wish to get into the cutter holder or if your using thicker gloves just hold it with the webbing lease
This is a small compact and lightweight cutter great for many uses but a diver must have since line is always around wrecks and any area folks are fishing!
If you really want a spare blade purchase from our drop down but we are telling you this blade will hold its edge. The only thing is it could gets damage so if your on a dive trip or away from home is really the only time to consider a spare blade!
So you do not want your snap to hold you tight in case you need to get freed quickly?
We have these small break away connector for just that purpose
Simply snap your swivel bolt snap to the inside part of this connector and then snap on a low pressure or Bc inflator hose. This connector has a 3/8" inch opening so as long as you are not using a thin hose you could even use a high pressure hose in braided or rubber
Holds in place until you give a good tug / pull and then what you are clip to it will release you from it. The snap will stay connected to whatever you snap onto but you and your hose will release
Size and Diamter- The scuba diving multi tool size is about 8.5x5.3x0.5cm/3.35x2.09x0.12inch, hole Diameter: 1cm/0.39inch, small size and lightweight, portable to grip, easy to carry
Convenient to Use- Geometric design makes this multi tool practical as well as special. Our tools for repairing diving regulator consist of frequently used tools, very convenient for you to use
Rustproof and Durable- The tools for repairing diving regulator is made of high quality 316 stainless steel material, anti-rust and sturdy, durable and long service life
For Diving Maintenance?- This multi tool is suitable for scuba diving regulator repair and maintenance. It is a great diving accessory for diving lovers
The Deluxe Drop Dee is a clever, yet versatile, piece of stainless hardware that will enhance any diver's kit. With the ability to reposition the angled D-ring, the plate can be mounted on either horizontal webbing (waist) or vertical webbing (shoulder).
You can now add our ring loop to any backplate being stainless steel or aluminum ones
This ring loop can be fixed eith on the front end or on the backside of the plate
Uses 2 screws with washers to fix onto your backplate
Made out of 316 material even the hardware to reduce rusting!
Note: We used a little silicone inside the screw threads to hold the screws from backing out or you can even use a lock washer to hold them in place lastly if you know that is where you wish to locate them use blue locktite to hold in place
Many divers take compasses for granted, considering them just an accessory to an overall dive gauge console system. Trying to navigate with a poorly designed or improperly functioning compass can be one of diving's more frustrating events. This Extreme Tilt Hose Mount Compass is a dual-purpose compass. The convenient side window allows quick reference of large, easy-to-read bearing indicators on a luminescent display for gun-sight accuracy. Or, for divers who prefer relative navigation, the ratchet bezel can be rotated easily even with thick neoprene gloves.
The luminous dial of the compass is designed with a half black / half luminous graphic to make quick work of compass direction, especially in dim light. The dial rests on a precision bearing and incorporates extremely strong magnets for super quick response, tilt and accuracy. While the compass module itself is very compact, the housing has a large vertical interior allowing viewing angles that would stop other compasses in their tracks. The compass bezel has compass headings in 30 Degree numbered increments and indicator marks for every 10 Degree.
Bezel has twin heading indicators for alignment of compass course, and a lubber line across the compass face. This highly accurate US made GP03 liquid filled compass comes in a durable rubber boot with a hose mount nut that fits full size 0.5" (12mm) high pressure hoses.
Note: Like all of Piranha's Dive Products we warranty this item any from manufacturing defects!
Have an issue or question with this or any of our products please feel free to email us at Piranhadivemfg@yahoo.com
to get your question or issue answered.
These Items have a limited warranty for 12 months from date of purchase so always keep your invoice number to allow us to verify everything during this period.
**Also has a hole on the top end of the blade to affix a bungee or line to keep your knife from being dropped during a dive!
**We also include 2 quick release leg straps!
*Included is a Nylon Fabric Sheath has loop at the top to slide onto your webbing or a plastic "D"-ring on the other end to connect your knife to your rig with
**Lastly we have raised little dots to help you hold your knife with or without gloves! These dots allow the user a better feel when holding the knife. The 2 piece handle is made from TPE and the blade has a full tang that the 2 piece handle is secure too
So this little holder you can secure your hoses and route them so they are not hanging out all over the place
Secure your corrugated hose if you need to also
Place your Spg in a secure position and route the hose tightly to your set-up
Strong Nylon material making this durable in your diving applications
You can locate your EezyCut knife with the standard or even the flex harness in more ways and placing it where you can get to it quickly if needed too
With this tab you can now clean up your diving rig with so many things you can do well we just cannot list them all but you will surely find these little guys very helpful
Large 2" x 2" inch velcro to adjust to fit your rigging
Has a large 2"+ inches of none velcro area so you can use this almost anylace on your rig!When you lay this piece out it is 6 3/4" inches long
Extreme tilt potential of +/- 30 degrees. Complete: compass module, bungee mount & bungee cord. 30" length of 4mm bungee cord. Mount with one continuous loop or two separate loops for redundancy. Luminescent easy-to-read compass card. Top and side reading. Northern hemisphere. Manufactured in Italy
Product Details
Feature 1.
Superior tilt potential of +/- 30 degrees
Feature 2.
Complete: compass module, bungee mount & bungee cord
Feature 3.
30 inches (76 cm) length of 4mm bungee cord
Feature 4.
Mount with one continuous loop or two separate loops for redundancy
Feature 5.
Luminescent easy-to-read compass card. Top and side reading. Northern hemisphere
Note: Like all of Piranha's Dive Products we warranty this item any from manufacturing defects!
Have an issue or question with this or any of our products please feel free to email us at Piranhadivemfg@yahoo.com
to get your question or issue answered.
These Items have a limited warranty for 12 months from date of purchase so always keep your invoive number to allow us to verify everything during this period.
With so many SMBs in the marketplace, it is easy to become confused. Some are "bare bones" proving difficult to use, while others are overbuilt, more suited for extreme expeditions.
The pocketed Surface Marker Buoy (SMB) adds all the right features with a lower pocket to hold a spool or even weight
Features:
6 ft (183 cm) length/large 12 in (30.5 cm) circumference
Lower pocket accommodates a lead weight or finger spool
Open bottom with anti-spill baffle
Combination oral and BC QD inflation
Overpressure relief valve w/ manual pull cord
SOLAS reflective tape on both sides
Note: Like all of Piranha's Dive Products we warranty them from manufacturing defects!
Have an issue or question with this or any of our products please feel free to email us at Piranhadivemfg@yahoo.com
to get your question or issue answered.
These Items have a limited warranty for 12 months from date of purchase so always keep your invoive number to allow us to verify
*Looking for no bump ties but only need a few? Well we sell them by the piece so you can get a few with a couple extra and not have to carry so many you will have them for a lifetime!
* Improve your diver's comfort & safety.
* Low profile and smooth with head height of .103in.
So you can now purchase three 5 grams little packs for those untimely emergencies
You now have little little packets so if you used one you can help your dive buddy or yourself it other repairs maybe needed on your wetsuit or even a drysuit! But you can also fix many other items if the need arises with this adhesive
Lays a clear adhesive that is not just flexible but also very durable
Deploying a marker buoy from depth has its challenges and here could make your dive a little easier? Also new to launching a surface marker buoy? This will make your learning much quicker and safer
KEY FEATURES
Easy Deploy Design
Simplifies Procedure
Just Add Air & Let-It-Fly
Provides Excellent Visibility
Over-Pressure Relief Valve w/Pull Cord
Purpose
Surface Marker Buoy
Materials
Buoy: Urethane Laminated Fabric
Dimensions (L x Circumference)
6' x 12" (183 x 30.5cm)
Color
Multiple
Inflation (Valve)
Combination Oral & QD Hose Inflation
Over Pressure Relief Valve
Yes
Manual Dump Valve
Yes
Finger Spool Included!
Material
Molded
Line Length
50' (15m) WHITE Lline
Attachment Point
D-Ring
Securing a line spool and SMB, connecting them together, deploying them, all while maintaining neutral buoyancy and holding on to other gear, has overwhelmed many a diver.
The Fast Launch Marker Buoy simplifies the procedure! The line spool is stored within the marker buoy and is already connected to it! Just add air and let it fly. 6' (183cm) in length with a large 12" (30.5cm) circumference provides excellent visibility when deployed on the surface.
Lower pocket includes a spool with 50' (15m) of line. Spool line is attached to D-ring inside the pocket.
Open bottom with anti-spill baffle plus also has a Combination oral and QD hose inflation.
Over-pressure relief valve with pull cord prevents your smb from damage when air expands!
SOLAS reflective tape on both sides increases visibility in low light or night conditions.
The Fast Launch Marker Buoy rolls up to a compact size and is secured with a squeeze-style side-release buckle.
Note: Like all of Piranha's Dive Products we warranty them from manufacturing defects!
Have an issue or question with this or any of our products please feel free to email us at Piranhadivemfg@yahoo.com
to get your question or issue answered.
These Items have a limited warranty for 12 months from date of purchase so always keep your invoice number to allow us to verify
With continuous weave harnesses, it can often be difficult to tighten the shoulders by pulling on the waist straps. This is due to friction caused by the tortuous path that the webbing makes as it goes through the dual slots in the backplate.
This Slide Bar mounts on the back of the plate "Stainless or Alum", between the slots. The slick, rounded surface minimizes the friction and makes the waist straps easier to pull through. Plus with the raised edges it helps keep the webbing from wondering off and causing issues when you pull your harness to tighten it to your body
Place these near the bottom sides on the left and right webbing slots to make these work properly
This design is for divers who like to bite into your mouthpiece! This will reduce the amount of mouthpieces you go thru during a normal dive season
Also excellent choice for cold water dives where you tend to bite or clamp down harder on your mouthpiece or want a more secure feeling holding your regulator this is an excellent choice
Need a holder for this design mouthpiece? Select our mouthpiece holder called "Tough Bite" design to fit this mouthpiece!
Our silicone mouthpiece is comfortable to wear during long dives
The silicone used makes using this mouthpiece very flexible, soft feeling and comfortable in your mouth while diving
For a more secure hold of your regulator in your mouth this could be just what you have been looking for
The DiveAlert SMB (surface marker buoy) features Closed-Circuit (one-way valve) construction, which prevents air spill at surface. Inflate on the surface to attract visual attention or redundant flotation. Inflate at depth to send up as a surface marker. Solas reflective tape (Coast Guard approved) across top of SMB creates better visibility day and night.
NOTE: The picture is of an ORANGE DMB1 Smb but you are purchasing a yellow one!
Over-Pressure Valve (OPV) prevents bursting and easy air dumping.
Deluxe SMB is 65? long by 8? wide (165 x 20 cm) which provides approximately 40 lbs. (18.1 kg) of lift.
Nylon strap handle on top allows for easy attachment of light or slate.
Material : 400 Denier Polyurethane Coated Nylon. Color : High Visibility Safety YELLOW. Dimensions : 65? Long By 8? Wide (165 X 20 Cm). Buoyancy: Approximately 40 Lbs. (18.1 Kg). Weight [with packaging] 0.65 lb
These smaller weight pockets are perfect to allow you to trim out with placing weight in all the right places
These will fit any 2" inch webbing and includes a tri-glide to place between the webbing slots on the back to hold your trim pocket in place
Made out of a heavy cordura material making it very durable for even the hardest diving conditions
The pocket is secured by velcro so releasing is easy just pulling up the flap
These compact pockets hold up to 4lbs either hard or soft weights. Hard weights work better but you can get the soft weights into the pockets also!
You are purchasing one pocket want
Hot Deals and New Product Intros
What has just landed and what is on the way out, in one section.
In stock right now: Intro Items, Close-Outs, Trim Weight Pockets Quick Attach Type, Tear Drop Open D-Ring w/ Teeth, New! Convex Rearview Mirror w/ Bungee Mount Gen 2 Design, Weight Block BLACK w/ Black bungee Purchasing a PAIR, New! Slider Hardware for Sidemount or Tec Use.
